• Composites Research
• /
• v.34 no.1
• /
• pp.35-46
• /
• 2021

This paper aims to reduce weight by replacing the reinforcements of the B-pillar used in vehicles with CFRP(Carbon Fiber Reinforced Plastics) and GFRP(Glass Fiber Reinforced Plastics) from the existing steel materials. For this, it is necessary to secure structural stability that can replace the existing B-pillar while reducing the weight. Existing B-pillar are composed of steel reinforcements of various shapes, including a steel outer. Among these steel reinforcements, two steel reinforcements are to be replaced with composite materials. Each steel reinforcement is manufactured separately and bonded to the B-pillar outer by welding. However, the composite reinforcements presented in this paper are manufactured at once through compression and injection processes using patch-type CFRP and rib-structured GFRP. CFRP is attached to the high-strength part of the B-pillar to resist side loads, and the GFRP ribs are designed to resist torsion and side loads through a topology optimization technique. Through structural analysis, the designed composite B-pillar was compared with the existing B-pillar, and the weight reduction ratio was calculated.

• FLOWER RESEARCH JOURNAL
• /
• v.26 no.4
• /
• pp.195-201
• /
• 2018

The plant morphological and chromosome characteristics of 'Bonanza', 'Coral Candy' and 'Purple Crystal', a formolongi-Asiatic (FA) interspecific hybrid species bred at the National Institute of Horticultural Science, Rural Development Administration (RDA), were investigated in this study. The flowering time of these species were found to have some variation. 'Bonanza' flowers in the middle to late June (medium-late maturing cultivar), 'Coral Candy' in the mid of June (medium maturing cultivar), and 'Purple Crystal' was observed to be in early June (early maturing cultivar). The flowering direction of all three cultivars are upward facing flowers and having a weak fragrance. The height of the plants was recorded in the range between 101.0 cm ('Purple Crystal') to 142.3 cm ('Bonanza'), thus they are able to develop cut flowers with excellent stem elongation. Flower diameters of 'Bonanza' (17.1 cm) and 'Coral Candy' (16.9 cm) were classified to be large sized flowers. On the other hand, 'Purple Crystal' had a narrow flower diameter (12.3 cm) with an outer petal width of more than 4.0 cm. Leaf length was observed for 'Bonanza' (15.7 cm), 'Coral Candy' (19.7 cm), and 'Purple Crystal' (11.1 cm). Chromosome analysis was done using FISH technique. Results revealed that all three cultivars were observed as triploids (2n=3x=36). FISH analysis also showed 5S/45S rDNA of 'Bonanza', 'Coral Candy' and 'Purple Crystal' as 4/11 loci, 4/12 loci, and 4/11 loci, respectively. The results of the FISH analysis are useful as markers to distinguish cultivars, since the patterns of rDNA observed on the remaining chromosomes are significantly different except FISH patterns of chromosome #3.

• Journal of the Institute of Convergence Signal Processing
• /
• v.21 no.1
• /
• pp.21-28
• /
• 2020

In this paper, a new type of electric wheelbarrow is proposed and developed. The developed electric wheelbarrow is equipped with an attitude reference system(ARS) sensor, which consists of 3-axis acceleration sensor and 2-axis Gyro sensor so that it can estimate pitch angle and roll angle. When an operator tilts the wheelbarrow up and down, the pitch angle is detected. The sign of the pitch angle is interpreted as the operator's intention for moving the wheelbarrow forward or backward and the controller drives the wheel of the wheelbarrow with the velocity according to the magnitude of the detected pitch angle. A cargo box of the wheelbarrow is designed to rotate and is controlled to maintain level always, so an operator can handle the electric wheelbarrow easily and safely. The wheelbarrow consists of an in-wheel motor, a DC motor, motor drives, an ARS sensor considering economical use in industrial field. Three experiments are performed to verify the feasibility and stability of the electric wheelbarrow.

• Journal of The Korean Association For Science Education
• /
• v.42 no.2
• /
• pp.253-264
• /
• 2022

The purpose of this study is to examine the practice of scientists from the perspective of Ian Hacking's 'creation of phenomena'. Scientific phenomena, according to Hacking, are regular and do not exist in nature without the intervention of scientists or experimental tools. This study tries to derive scientific educational meaning by analyzing the thoughts and episodes of the 'Sontanda (inter-individual variability)' phenomenon experienced by four life scientists. The Sontanda phenomenon is a common term used by scientists to describe phenomena in which findings do not appear consistently even when studies are carried out using the same experimental procedure and materials. The following four educational implications were discovered as a result of the research. First, we confirmed the importance of embodied knowledge, or non-verbal knowledge, which solves issues by making appropriate judgments and reactions at all times, rather than simply becoming accustomed to the experimental method. This argues that propositional knowledge and non-verbal knowledge should be handled equally in order to provide students with a practical scientific inquiry. Second, we tried to reconsider the picture of the experiment. The phenomenon revealed in the interviews of scientists is rare, and it takes a long time to stabilize the phenomenon. On the other hand, the image of school experiments is always positive and consistent, necessitating a shift in perspective. Third, the precise meaning of scientific practice could be confirmed. This study confirms that scientists use their knowledge effectively in line with the circumstances, and we examined strategies to apply scientific practice to school instruction based on this. Finally, by provoking uncertainty, the Sontanda phenomena may give students with an opportunity to engage in meaningful scientific involvement. By breaking away from the cookbook experiment, this study expects school experimental education to help in efforts to experience scientific practice.

• Journal of Bio-Environment Control
• /
• v.31 no.1
• /
• pp.8-13
• /
• 2022

This study was carried out to investigate the proper wattage and installation distance for the efficient use of nano-carbon fiber infrared heating lamp (NCFIHL), a heating device advantageous for heating energy saving, when the production of watermelon plug seedlings in the plug seedling nursery in winter season. Six small beds were divided into plastic film, and 700 W and 900 W nano-carbon fiber infrared heating lamps were installed at 100 cm above the bed. 1 lamp at central (control), 60 cm interval (2 lamps), and 40 cm interval (3 lamps) heating lamps were installed in each bed inside the greenhouse. All treatments, except the control, were set to keep the night air temperature at 20℃ after lighting the NCFIHL. The leaf temperature showed a tendency to increase fast as the install distance was narrow. The leaf length and leaf width tended to increase as the installation distance of the 700 W heating lamp was narrow. The compactness was high in 700 W heating lamp with 40 cm of installation distance. Therefore, in consideration of maintaining the set temperature at night, installing 700 W electric lamps at 40 cm was an efficient power and installation distance for watermelon grafted seedlings considering economic feasibility.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.5
• /
• pp.249-257
• /
• 2022

This paper presents an improved computational framework for the direct-solution-based finite element tearing and interconnecting (FETI) algorithm. The FETI-local algorithm is further improved herein, and localized Lagrange multipliers are used to define the interface among its subdomains. Selective inverse entry computation, using a property of the Boolean matrix, is employed for the computation of the subdomain interface stiffness and load, in which the original FETI-local algorithm requires a full matrix inverse computation of a high computational cost. In the global interface computation step, the original serial computation is replaced by a parallel multi-frontal method. The performance of the improved FETI-local algorithm was evaluated using a numerical example with 64 million degrees of freedom (DOFs). The computational time was reduced by up to 97.8% compared to that of the original algorithm. In addition, further stable and improved scalability was obtained in terms of a speed-up indicator. Furthermore, a performance comparison was conducted to evaluate the differences between the proposed algorithm and commercial software ANSYS using a large-scale computation with 432 million DOFs. Although ANSYS is superior in terms of computational time, the proposed algorithm has an advantage in terms of the speed-up increase per processor increase.

• Journal of Bio-Environment Control
• /
• v.30 no.3
• /
• pp.183-187
• /
• 2021

Appropriate pruning is very important for southern highbush blueberries cultivated in a heated plastic house to control their severe crowding within the bush canopy after harvest. Pruning treatments at different times were evaluated to find out an appropriate pruning time to southern highbush 'Scintilla' cultivation with heating. Seven-year-old (2018) bushes, grown in 180-L containers, were summer-pruned on May 20 (35-39 days after harvest) and June 20, or dormant-pruned on December 20 (5 days before flowering), consecutively in both 2018 and 2019 removing 30% of the total woods. May pruning activated occurrence of shoots the following years, increasing number of shoot by 17 to 49% and total shoot length by 18 to 32% compared with those of the dormant pruning. Fruit characteristic was not significantly affected by different pruning times the previous year. The first year pruning treatment did not influence the yield the following year, but the second year consecutive May pruning significantly increased yield per bush by 7% compared with the dormant pruning. The results indicated that summer pruning in May could be favorable to promote shoot growth and to maintain stable yield.

• Journal of the Korea Convergence Society
• /
• v.12 no.4
• /
• pp.229-236
• /
• 2021

There has been a lot of research on the real estate market, but a lack of research on the supply and demand of housing supply in each region, reflecting the changes in population growth and supply. It is calculated as the transition probability of the Markov chain model by reflecting the data on the number of houses per 1,000 people in the past 35 years and the forecast data for population change by region, in terms of supply (housing) to demand (population) for factors on the real estate market. According to the calculation results of the real estate market by region, the housing supply to the metropolitan area such as Gyeong-gi, Incheon, and Seoul is expected to be insufficient for a considerable period of time, considering the population changes by region. To stabilize the real estate market, it was confirmed that it was necessary to actively apply the differentiation of housing supply by region. It is meaningful in terms of verifying long term trends in the real estate market by region that reflect the prediction of population change, and it is expected that the methods used in this study will be practical through the analysis results using the historical data.

• Journal of the Society of Disaster Information
• /
• v.17 no.1
• /
• pp.184-193
• /
• 2021

Purpose: In this study, since the operation principle of the CCFL Exit light is the same as that of general lighting equipment, the characteristics of the CCFL Exit light were analyzed by deriving test items that can affect the characteristics of the light source from the KS standard, which is the standard for lamp ballast performance certification of general lighting equipment. Method: The samples used in the experiment were performed on products of two manufacturers for each size, such as large, medium, and small, and the test items were power factor, crest factor, and current harmonic distortion. Result: As a result of the experiment, the power factor showed a value between 0.4 and 0.6 in all samples, which was smaller than the 0.9 value set by KS. The crest factor ranged from 3.6 to 3.7 for large, 4.4 to 4.7 for medium, and 3.5 to 3.7 for small. It showed a value more than two times higher than the KS standard of 1.7. Current total harmonic distortion ranged from 81% to 110%, and considering that the KS standard was less than 20%, it could be confirmed that all samples had a value significantly exceeding the KS standard. Conclusion: The crest factor and current total harmonic distortion may affect the temperature rise of the light source and the burnout of the device. When developing an exit light, if this item is developed within the scope of the KS standard, the quality improvement and maintenance of the exit light will be greatly improved.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.3
• /
• pp.60-72
• /
• 2022

A number of wooden built heritage remain in Korea, and most have been damaged by various biological factors including termite. Owing to the irreversible damage caused by termites, wooden built heritage are losing their authenticity and structural stability. In this study, Area-Wide Integrated Termite Management(AW-ITM) was proposed to prevent termite damage. First, to understand the locational characteristics of these sites, the distance from adjacent forests and surrounding forest areas was analyzed for 182 national designated wooden built heritage(national treasures, treasures) using the Geographic Information System(GIS). By analyzing existing pest control projects(2003-2020) and the components of the ITM, the characteristics of termite control for cultural heritages were determined. Based on these results, the cultural heritage sites and their surrounding spaces were divided into three areas, and the types of cultural properties were divided into six types according to the location and number of buildings. Along with this, termite control measures were proposed for each area and type. The concept of AW-ITM has been partially applied to the "Comprehensive Control of Termites in wooden built heritages Sites" by the Cultural Heritage Administration. Caution must be taken with regard to the establishment of a cultural heritage management policy; AW-ITM should be applied on a trial basis with the results then being carefully analyzed and reflected in the establishment of policies pertaining to the conservation management of cultural heritage.