• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.669-675
• /
• 2020

In this study, 3D analysis was compared in evaluating the track deformation of subway structures during adjacent excavation. For the 3D analysis model, the boundary conditions of the tunnel model and the application level of the ground water were analyzed as variables. As the result of the effects of track irregularity using the 3D model, the analysis model considering the site ground water level instead of the design values and changing the constraint of the boundary condition is more reasonable. In addition, the influence of track irregularity due to the boundary condition and load condition of the analytical model is more obvious in the factors directly affected by the longitudinal relative displacement of the rail, such as alignment, cross level and gauge irregularity. Therefore, the evaluation on track stability according to adjacent excavation work was appropriate to analysed the longitudinal deformation of the track by using 3D model that could be investigate the deformation of rail. In addition, the boundary condition and load condition(ground water level) of the numerical model was important for accurate analysis results.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.4
• /
• pp.425-431
• /
• 2015

Since the construction of Kori 1 was completed in 1978, the construction projects for nuclear power plant are increasingly expanded into domestic and foreign sites. However, some of construction sites of nuclear power plant have the problems of process delay and cost loss due to lack of ability of risk management. The construction of reactor containment building in nuclear power plant is especially dotted with many risk factors because it needs professional skills and large-scale resources due to long duration compared with different construction phase. Therefore, it needs the study that analyzes risk factors expected in construction of reactor containment building and suggests way of stable performance of projects. So, this study assesses risk factors of construction of reactor containment building. For the objectives, this study uses survey for group of minority specialists of 36 experts. The risks of 24 factors is classified by criterions of process, cost, safety, and quality and the results of assessment is analyzed by analytic hierarchy process. As the results, the importance and priority of risk factors classified by each criterion were calculated and the applicability of analytic hierarchy process was identified to analyze risk factors of nuclear power plant construction. These will be baseline data for risk management in construction phase of reactor containment building.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.4
• /
• pp.3-11
• /
• 2018

The Construction Workers Mutual Aid Association is carrying out a number of strategic tasks with the goal of "contributing to improving employment and stabilizing the return of workers to construction workers through employment welfare and retirement deduction services." One of them is the retirement deduction system. The retirement allowance system is a system for the retirement income and livelihood security of construction workers who are not adequately protected by the Labor Standards Act, such as retirement allowances due to the nature of day labor. The Construction Workers Mutual Aid Association has promoted the introduction of electronic manpower management. For the efficient management of the pilot sites and the plans for the future, comprehensive evaluation of the pilot sites as well as the evaluation of the status and operation results of each pilot project site are needed. Therefore, in this study, we will develop performance indicators to evaluate the current state of electronic manpower pilot projects and analyze the actual situation of pilot project sites through actual application, and try to derive future implementation strategies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7575-7581
• /
• 2015

Corticotropin-releasing factor(CRF), one of the stress driven neuropeptides, was widely proposed to influence hair loss and re-growth. For the development of receptor antagonists, the screening system based on intracellular calcium signal process was developed and optimized. The aequorin parental cells were transfected with CRF1 receptor and alpha 16 promiscuous G protein cDNA to establish HEK293a16/hCRF1, a stable cell line for the human CRF1 receptor. In HEK293a16/hCRF1 cells, the range of sauvagine dose response was 12-fold higher($EC_{50}:15.21{\pm}1.83nM$) than in the transiently expressed cells, hence essential conditions for the antagonist screening experiments such as the robust signals and high solvent tolerance were secured. The standard antagonists for the CRF1 receptor, antalarmin and CP154526, resulted $IC_{50}$ values of $414.1{\pm}5.5$ and $290.7{\pm}1.9nM$, respectively. Similar results were presented with frozen HEK293a16/hCRF1 cells. Finally, our HEK293a16/hCRF1 cells with the aequorin based cellular functional assay can be a model system for the development of functional cosmetics and modulators that can have a clinical efficacy on hair re-growth.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.6
• /
• pp.739-747
• /
• 1997

This study was performed to clarify various conditions on the test of lipoxygenase-l and to establish the application of new test method for varietal improvement of soybeans in order to decrease beany flavors. Potassium borate and Tris were used as buffer and O.1M potassium borate solution showed the best result for the lipoxygenase-l test. In the range of pH 8.5~9.0 of the buffer, 2mM linoleic acid as substrate was effective. For color development, 100$\mu$l of two solutions(KI and starch) were added to the half soybean seed, successively. The substrate solution included linoleic acid was stored safely for 10 days at 4$^{\circ}C$ in refrigerator and for 4 days at room temperature. The best result was as follows; the 1ml of substrate solution[0.1M potassium borate(pH 9.0), 0.1％ Tween-20, 2mM linoleic acid] was added to the chipped half soybean seed in l.5ml plastic tube, waited for 15 minutes, and 100$\mu$l of color development solutions(5％ saturated KI in 15％ acetic acid, 1％ starch) were added to the tube, successively. After 4 hours, the purple color was observed in the upper phase of the plastic tube in the presence of lipoxygenase-1 and milky color in absence of lipoxygenase-1. The purple color was stable from 4 to 24 hours. There was no interfering effect by lipoxygenase-2 and -3. The plastic tube should be placed in the tube stand without shaking during the lipoxygenase-l test.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.3
• /
• pp.189-194
• /
• 2012

In this study, a 3-stage biological aerated filter (BAF) system was proposed to enhance nitrogen removal in the treatment of low carbon to nitrogen ratio (C/N ratio) municipal wastewater. Laboratory experiments were conducted to evaluate the effects of dynamic-flow at the HRT of 6 h. Results of the long-term operation of 3-stage BAF systems showed that the dynamic-flow enabled the total nitrogen removal (T-N) removal efficiency of the system to be about 7 % higher than that of non-dynamic-flow system in treating domestic wastewater due to the more efficient use of organic substrates. The overall $NH_4$-N removal performance was stable during the operational period due to the unique system configuration where independent nitrification occurred. It was concluded that the 3-stage BAF system proposed in this study provided excellent performance in the removal of nitrogen by employing dynamic-flow and three columns functioning as sorption, denitrification and nitrification, respectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.1
• /
• pp.21-28
• /
• 2009

Physico-chemical characteristics of the Ca-based and Na-based dry sorbents were compared using thermo-gravimetric analysis (TGA) and temperature programmed desorption (TPD) methods. The studied characteristics were thermal stability, sulfur dioxide ($SO_2$) absorption capacity and absorption rate at $250^{\circ}C$ which is a typical temperature before a fabric filter, and $SO_2$ absorption capacity at an ambient temperature. Calcium hydroxide ($Ca(OH)_2$) started to decompose into calcium oxide (CaO) at $390^{\circ}C$ and completed at 480~$500^{\circ}C$, showing 76% of an original $Ca(OH)_2$ weight. Sodium bicarbonate ($NaHCO_3$) also converted to sodium carbonate ($Na_2CO_3$) between $95^{\circ}C$ and $190^{\circ}C$, decreasing the weight to 63% of its initial weight. Among four sorbents tested at $250^{\circ}C$, sodium carbonate had the highest capacity, absorbing 0.35 g $SO_2$/g sorbent. Calcium oxide and calcium hydroxide followed that showing 0.156 g and 0.065 g $SO_2$ absorption per absorbent respectively. Ca-based absorbents showed slower rate than sodium carbonate because of initial stagnant step. However, calcium hydroxide caught more $SO_2$ than sodium carbonate at ambient temperature. From this work, it can be concluded that Ca-based absorbent is a proper sorbent for $SO_2$ treatment at low temperature and sodium carbonate, at high temperature.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.5
• /
• pp.556-563
• /
• 2007

We carried out a laboratory scale experiment about the characteristics of chemically active species produced in hybrid gas-liquid discharges. The electrode configuration which had high voltage electrode in the gas phase and ground electrode in the liquid was utilized while high voltage electrode has been typically positioned in the liquid in other studies. Our electrode was configured in such a way as to increase the energy efficiency of chemical reactions by creating a higher electrical field strength and a narrower pulse width than the typical electrode configuration. The highest ozone concentration was obtained at 45 kV which was the medium value in operating voltages. The decrease of solution conductivity increased the resistance of liquid phase and the electric field strength through the gas phase, so ozone gene-ration rate was enhanced. The increase of voltage promoted the production rate of hydrogen peroxide by increasing the electric field strength. In a lower voltage, the increase of solution conductivity increased the degradation rate of $H_2O_2$, so the $H_2O_2$ generation rate decreased. On the other hand, the effects of UV radiation, shock waves etc. increased the $H_2O_2$ generation rate as the solution conductivity increased. A higher rate of $H_2O_2$ generation can be achieved by mixing argon to oxygen which generates a stronger and more stable discharges.

• Journal of Energy Engineering
• /
• v.8 no.4
• /
• pp.567-575
• /
• 1999

This study found potential ability to generate electric power using difference in water temperature between sea surface water and deep water in the East Sea which includes the East Sea Proper Water with the temperature less than 1$^{\circ}C$ throughout a year without seasonal variation. To quantify the difference in water temperature between sea surface water and deep water in the East Sea. We computed the annual mean ($^{\circ}C$), the annual amplitude ($^{\circ}C$), the annual phase (degree) and the duration time which showed more than 15$^{\circ}C$ temperature difference from the water temperature data using Harmonic analysis during 1961~1997. The best place for generating electric power in the East Sea seems to be the eastward ocean areas (36$^{\circ}$ 05'N, 129$^{\circ}$ 48'E~36$^{\circ}$ 05'N, 130$^{\circ}$ 00E'E) from Pohang city. The annual mean of the difference in water temperature between sea surface water and 500 m depth was 24$^{\circ}$C at the place to generate electric power in August according to the data of 1961~1997. the maximum duration periods with more than 15$^{\circ}C$ temperature difference were 215 days (5/5-12/10) a year in the place mentioned electricity with a stable plan. In the East Sea coastal areas of the Korean peninsula, the average minimum depth to reach the East Sea Proper Water from surface water is 300 m and fluctuates between 250 m and 350 m throughout a year. Further studies could be needed for the utilization of cold water, such as the East Sea Proper Water for energy conversion.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.34 no.1
• /
• pp.60-67
• /
• 2014

The comparisons between cellulolytic bacteria adhesion on rice straw and fiber digestion in time course during rumen fermentation were studied in situ. The adhesions of cellulolytic bacteria, F. succinogenes. R. albus and R. flavefaciens, were measured by RT-PCR. When the rice straws were incubated at 0. 2, 4, 8, 12 and 24 hours of the in situ rumen, straw was degraded with increasing speed during the incubation and showed the highest disappearance increasing rate (DM g/h) from 8 to 12 hour. The adhesions of F. succinogenes, R. flavefaciens and R. albus were achieved above 80% in 1 hour of in situ rumen fermentation and then keep adhesive population up after the time of fermentation. When the in situ samples were collected at 0, 5, 10, 30 and 60 min to detect the early stages of adhesion on the rice straws ingested into rumen, the numberous adhesive colony of F. succinogenes, R. flavefaciens and R. albus were detected in 5 min. In case of rice straw treated with 0, 2, 4 and 8% NaOH, all of three cellulolytic bacteria showed the increasing trends of adhesion with increasing DM disappearance of rice straw by higher concentration of NaOH at 12 hour of in situ. However, there were showed respectively difference at 24 hour. The present results gave certain evidence that adhesion of cellulolytic bacteria is definitely achieved in early stage of roughage ingestion into rumen, their colony develop the stable communities on roughage in process of rumen fermentation and then fiber degradation is accelerated.