• Proceedings of the KAIS Fall Conference
• /
• 2002.05a
• /
• pp.209-211
• /
• 2002

차량 탑재 FM 수신용 전 방향성 루프 안테나를 개발하였다. 2개의 수직 루프를 90도 교차하고, 1개의 수평 루프와 결합함으로써 전 방향 특성을 가질 수 있다. 또한 수직 및 수평편파 모두를 박기 때문에 도심 등 주위 환경변화에 따른 편파 다이버시티 현상도 제거한 수 있다. 10cm 직경의 19회 감긴 각 루프를 정합시키고 증폭하여, 90도 이상기와 함께 결합한 안테나를 개발하였다. FM 대역인 88-108MHz 대역에서 측정된 반사특성 및 패턴은 이론치와 잘 맞고 있으며, 기존 whip안테나 보다 평균 4dB 향상된 수신전력 특성을 보이고 있다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.3
• /
• pp.489-496
• /
• 2019

In this paper, we design and fabricate an ultra small dual crossed dipole antenna operating at 2.4 GHz frequency. In order to miniaturize the size of the antenna so that it can be applied to a mobile device, a cross dipole is disposed on the upper two layers and a reflection plane, a horizontal matching circuit and a ground plane are arranged on each layer. The circuit was connected by a vertical through-hole. The size of the fabricated antenna is $21.61mm{\times}16.88mm{\times}1.27mm$, the measured reflection coefficient is -31.5 dB, and the bandwidth below -10 dB is 112 MHz. In addition, since the gain of the antenna is -4 dBi, it has the omnidirectional radiation characteristic, so it can be applied to various fields as an antenna for mobile devices.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.3
• /
• pp.116-123
• /
• 1990

Most algorithms utilized the horizontal epipolar lines for solving the correspondence problem in 3-D computer vision. However, the requirement is very difficult to be satisfied in real situations. In this paper, we propose a binocular-stereo matching algorithm, based on line matching method, which does not require the horizontal epipolar lines of the extreme pixels of a given line segment and two circles whose radius is equal to the maximum disparity. And we use the features including the direction of line segments, edge strength and cross-correlation for line matching. The experimental results show that the proposed algorithm can be a useful tool for solving the correspondence problem in 3-D computer vision.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.6
• /
• pp.77-87
• /
• 2011

In this paper, we propose a disparity correction technique to reduce the inherent visual discomfort while watching stereoscopic videos. The visual discomfort must be solved for commercial 3D display systems to provide natural stereoscopic videos to human eyes. The proposed disparity correction technique consists of horizontal and vertical disparity corrections. The horizontal disparity correction is implemented by controlling the depth budget of stereoscopic video using the geometric relations of a stereoscopic camera system. In addition, the vertical disparity correction is implemented by using a feature-based stereo matching algorithm. Conventional vertical disparity corrections have been done by only using camera calibration parameters, which still cause systematic errors in vertical disparities. In this paper, we minimize the vertical disparity as small as possible by using a feature-based correction algorithm. Through the comparisons of conventional feature-based correction algorithms, we analyze the performance of the proposed technique.

• Journal of Broadcast Engineering
• /
• v.24 no.1
• /
• pp.142-152
• /
• 2019

There is growing interest in ultra-high-resolution content that gives a more realistic sense of presence than existing broadcast content. However, in order to provide ultra-high-resolution contents in existing broadcast services, there are limitations in view angle and resolution of the image acquisition device. In order to solve this problem, many researches on stitching, which is an image synthesis method using a plurality of input devices, have been conducted. In this paper, we propose method of dynamic object based video stitching using minimal error seam in order to overcome the temporal invariance degradation of moving objects in the stitching process of horizontally oriented videos.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.16 no.2
• /
• pp.83-91
• /
• 2004

The performance of wave control by a surface-mounted horizontal membrane is analyzed in the frame of linear potential theory. To employ the eigenfunction expansion method, the fluid domain is divided into two regions i.e. region without membrane and membrane-covered region. By matching the each solutions at boundaries of adjacent regions, the complete solution is obtained. The present analytical method solving the scattering problem directly gives the same results as Cho and Kim(1998)'s method solving the diffraction and the radiation problem separately. To verify the developed model, the model test with a surface-mounted horizontal membrane is conducted at the wave tank(36m${\times}$0.91m${\times}$l.22m). The analytic results are in good agreement with the experimental results. The reflection and transmission coefficients are investigated according to the change of membrane tension, length and incident frequencies.

• Journal of Broadcast Engineering
• /
• v.3 no.1
• /
• pp.85-92
• /
• 1998

The block matching algorithm is the most popular motion estimation method in image sequence coding. In this paper, we propose a VLSI architecture. for implementing a recently proposed fast bolck matching algorith, which uses spatial correlation of motion vectors and hierarchical searching scheme. The proposed architecture consists of a basic searching unit based on a systolic array and two shift register arrays. And it covers a search range of -32~ +31. By using the basic searching unit repeatedly, it reduces the number of gatyes for implementation. For basic searching unit implementation, a proper systolic array can be selected among various conventional ones by trading-off between speed and hardware cost. In this paper, a structure is selected as the basic searching unit so that the hardware cost can be minimized. The proposed overall architecture is fast enough for low bit-rate applications (frame size of $352{\times}288$, 3Oframes/sec) and can be implemented by less than 20,000 gates. Moreover, by simply modifying the basic searching unit, the architecture can be used for the higher bit-rate application of the frame size of $720{\times}480$ and 30 frames/sec.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.8
• /
• pp.88-100
• /
• 1999

Detecting human face and facial landmarks automatically in an image is as essential step to a fully automatic face recognition system. In this paper, we present a new approach to detect automatically face and its eyes of input image with scale and rotation variations of faces by using an intensity based template matching with a single log-polar face template. In a template-based matching it is necessary to normalize the scale changes and rotations of an input image to a template ones. The log-polar mapping which simulates space-variant human visual system converts scale changes and rotations of input image into constant horizontal and cyclic vertical shifts in the output plane. Intelligent use of this property allows us to shift of the candidate log-polar faces mapped at various fixation points of an input image to be matched to a template over the log-polar plane. Thus, the proposed method eliminates the need of adapting multitemplate and multiresolution schemes, which inevitably give rise to intensive computation involved to cope with scale and rotation variations of faces. Through this scale and rotation involved to cope with scale and method can lead to detecting face and its eyes simultaneously. Experimental results on a database of 795 images show over 98% detection rate.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.4
• /
• pp.29-40
• /
• 2004

This paper reports the frequency characteristics and the time response of parallel adjacent-transmission lines, crossed adjacent-transmission lines and parallel adjacent-transmission lines which are on the different planes by using FDTD-PML method. In the parallel adjacent-transmission lines, the crosstalks as a function of horizontal distance are calculated and in the crossed adjacent- transmission lines, the crosstalks as a function of vertical distance are simulated. Also, the crosstalks as functions of horizontal and vertical distances are measured and analyzed in the parallel adjacent-transmission lines which are on the different planes.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.11
• /
• pp.64-73
• /
• 2012

In this paper, we propose a method to search for identical videos. The proposed method is spatio-temporal group feature fingerprinting. Frame of video is extracted from fixed rate method and is partitioned into vertical group and horizontal group. Descriptor is made of each group feature that is extracted from binary fingerprinting. Next, use descriptor of original video to build a two type of fingerprinting database and matching with query video. To efficient and effective video copy detection, method have high robustness, independence, matching speed. In proposed method, group feature have high robustness and independence in variable modification of video. Building a original fingerprinting database is able to fast matching with query video. The proposed method shows performance improvement in variable modifications in comparison to the existing methods. Especially, very singular performance in speed improvement is great advantage of this paper.