• 한국해양학회지
• /
• v.30 no.2
• /
• pp.125-137
• /
• 1995

CTD, light transmission and tidal current data obtained off the Keum estuary in August, 1991 and 1992 were analyzed to look into the plume movement and the vertical structure of the plume changing with tidal currents. When the river plume was developed by a localized torrential downpour, the initial plume showed a surface lens of low salinity in the section south of the Yeon-Do. The axis of surface lens moved with tidal currents which flows mainly northeastward and southwestward tn the study area and the excursion of the lens axis reached 7 km. The plume during the ebb period showed a symmetric lens structure of low salinity which extends vertically to 3 m below the surface. During the flood period the plume deepened to 6 m below the surface in its northen side forming a sharp salinity front, which results in an asymmetric lens. We suggest that the salinity front with deepened plume moved to the north repeatedly, resulting in temperature increase and salinity decrease in the northern region off the estuary. When the river discharged continuously the large volume over 20 days, the plume forming surface lens extended to the Sybidongpa-Do and deflected to the north.

• Korean Journal of Remote Sensing
• /
• v.14 no.4
• /
• pp.315-324
• /
• 1998

The total precipitable water fields derived from HIRS(High Resolution Infrared Radiometer Sounder)and MSU(Microwave Sounding Unit) measurements of TOVS and brightness temperature of SSM/I were used to investigate the evolution of moisture fields for the Typhoon WALT(9407) which after landing in Japan it became tropical depression in Korea-Japan Strait, and FAYE(9503) which was the first tropical storm of 1995 to became a typhoon, respectively. The total precipitable water derived from TOVS observations is delineated according to the evolutions of WALT and FAYE movements because total precipitable water fields of TY WALT(9407) and FAYE9\(9503) were largely controlled by horizontal transport of water vapor over the Northwest Pacific Ocean which dominantly plays an important role in maintaining and accelerating their intensities toward Korea and Japan . These fields demonstrated that two major bands, which imply the rain bands, were locally well-organized and similar to the thick convective cloud features over Japan and the Korean peninsula while WALT and FAYE were approaching away and to. But the values of derived TOVS total precipitable water have shown the underestimate of those of SSM/I total comparatively for two typhoons.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.377-377
• /
• 2015

부유사 자료는 유사이송해석에 필수적인 요소로 하천의 흐름 변화 및 하상 변동을 발생시키고, 하천 구조물의 설계, 수자원 개발 및 관리를 위한 하천계획의 전반에 있어 매우 중요한 자료이다. 부유사 농도는 수자원의 이용뿐만 아니라 하천 생태계에까지 피해를 미친다는 점에서 하천의 유지 관리 및 보수와도 밀접한 관련이 있다. 부유사량을 산정하는 방법에는 수리량 및 하상토 특성 자료를 유사량 공식에 대입하여 계산하는 간접적인 방법과 유사량을 직접 측정하는 방법으로 나뉜다. 현재 국내에서는 유사량 채집기를 사용하여 실제 하천의 유사량을 채집하는 방식으로 많이 사용되고 있으나, 많은 인력과 시간이 소모되기 때문에 다지점 계측과 지속적인 계측이 힘들다는 한계점를 보이고 있다. 또한 국내 하천에서는 홍수기를 거치면서 하천의 수리학적 특성이 변화하는 경향을 보여주고 있어 유량-부유사 관계식을 자주 갱신해야 한다는 어려움이 있다. 이에 본 연구에서는 현재 국내에서 사용하고 있는 직접적인 측정 방법의 한계점을 보완하고자 직접적인 측정 방법 중 초음파를 이용하여 횡단면 전체의 유사량 측정을 연속적으로 할 수 있는 수평초음파도플러유속계(H-ADCP)를 활용하여 유사량을 추정할 수 있는 기법을 개발하고자 한다. 본 연구의 연구는 건설기술연구원 하천실험센터의 직선수로에서 수행되었다. H-ADCP (SonTek SL3000, 셀 크기 4 cm)를 사용하여 자연상태 흐름조건 (유속 0.7 m/s)에서 초음파산란도(Backscatter, 혹은 신호대잡음비 SNR) 및 유속자료를 2분 간격으로 확보하였다. 그리고 부유사 농도(SSC)의 측정 정확도가 높다고 평가되고 있는 레이저부유사측정기(LISST-100)를 활용하여 부유사 농도를 실측하여 초음파산란도와 실측 SSC의 관계를 도출하고 그 경향을 분석하였다. 또한 초음파산란도의 흡수 등을 보정하고 실측 부유사자료와의 관계식을 기반으로 H-ADCP를 활용하여 실시간으로 부유사 농도를 산정할 수 있는 소프트웨어를 개발하였다.

• Journal of Advanced Navigation Technology
• /
• v.25 no.5
• /
• pp.344-356
• /
• 2021

In the field of civil aviation in Korea, inappropriate crew resources management(CRM) constantly occurs between captains and first officers during flight. Therefore, the active role of first officers is emphasized in pilot training for CRM, threat & error management(TEM), safety management system(SMS), fatigue risk management system(FRMS), and training in simulators. Thus, it is urgent for captains to change their transformational leadership to emotional leadership, advantages of which include horizontal interpersonal relationship, open-mindedness, leading by example, considerateness, mutual respect, and using informal language. For the direction to improve 'the cockpit culture' in civil aviation, the key idea of the current thesis paper is the influence of captains' transformational and emotional leadership on the emotions of first officers.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.6
• /
• pp.793-799
• /
• 2018

The CCD camera is easily deteriorated by radiation, and an integrated camera using an image pickup tube is used in a high radiation area. We implemented a radiation camera system which is divided into a camera head using radiation-resistant electronic components and a remote control using weak radiation-resistant electronic components such as TR, IC, etc. According to the experimental results, the first damage of the electronic parts was IC for horizontal and vertical sync generation, and it was confirmed that if the radiation of $2{\times}10^5{\sim}10^6rad$ is accumulated, the normal function is lost. In addition, the signal transmission cable for remoteization has added an input/output buffer circuit and reduced the closed loop area of the shield and the cable to eliminate signal loss correction and noise. Therefore, it is expected that the maintenance cost will be greatly reduced and practical because only the camera head part can be used instead of replacing the entire system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.11
• /
• pp.1518-1523
• /
• 2018

A method for designing a DDQYA fed by a CPW is proposed in this paper. The proposed CPW-fed DDQYA consists of two series-connected strip dipoles, a ground reflector, and a strip-pair director. Instead of the conventional microstrip feed line in which the signal line is located on the substrate opposite to the antenna, a CPW is used because CPW is located on the same side with the antenna, and so the fabrication is easy. The strip-pair director is composed of two horizontally-separated strips, and it is added above the second dipole to enhance the gain in the high frequency region. A prototype of the proposed CPW-fed DDQYA is fabricated on an FR4 substrate. The fabricated antenna has a frequency band of 1.66-3.38 GHz(68.3%) for a voltage standing wave ratio < 2, and measured gain ranges 5.0-7.3 dBi over a frequency band of 1.60-2.90 GHz.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.2
• /
• pp.109-120
• /
• 2021

This paper proposes the H∞ norm based data association gate method to apply robustly the data association gate of passive sonar automatic target tracking which is on non-linear targets in dense cluttered environment. For target tracking, data association method selects the measurements within validated gate, which means validated measuring extent, as candidates for the data association. If the extent of the validated gate in the data association is not proper or the data association executes under dense cluttered environment, it is difficult to maintain the robustness of target tracking due to interference of clutter measurements. To resolve this problem, this paper proposes a novel gating method which applies H∞ norm based bisection algorithm combined with 3-σ gate method under Gaussian distribution assumption and tracking error covariance. The proposed method leads to alleviate the interference of clutters and to track the non-linear maneuvering target robustly. Through analytic method and simulation to utilize simulated data of horizontal and vertical bearing measurements, improvement of data association robustness is confirmed contrary to the conventional method.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.1
• /
• pp.49-57
• /
• 2021

This study is to find ways to self-produce energy even in buildings through the system of trees that grow by themselves focused on literatures and case studies. It is divided into the structure, circulation and reaction system of tree. 1) In the structural system, the tree is divided into the shoot and root system, and maintains rigidity with the cell membranes. The wind resistance caused by the trunk and crown can be applied to the seismic structure principle of building, and the role of platelike buttresses of lateral roots can be applied to the horizontal truss and suspension bridge. 2) In the circulation system, the transpiration action through the fine stomata of the leaves can be a very effective cooling means because a large amount of heat is released and this method can be directly introduced into the cooling of buildings. 3) In the responsive system, the response system according to environmental changes that can be read from the leaves and flowers of trees can be applied to the roof and exterior design of buildings through the use of new sensing technologies and materials.

• Food Engineering Progress
• /
• v.23 no.2
• /
• pp.87-93
• /
• 2019

Temperature distribution studies were performed in steam-air retort to investigate the influence of various processing conditions (come-up time, sterilization temperature, and internal pressure throughout the steam-air retort). Retort temperature data were analyzed for temperature deviations during holding phase, maximum temperature difference between test locations at the beginning and after 1, 3, and 5 min of the holding phase, and box-and-whiskers plots for each location during the holding phase. The results showed that high sterilization temperature led to a more uniform temperature distribution than low sterilization temperature (pasteurization). In pasteurization condition, the temperature stability was slightly increased by increasing pressure during the holding phase. On the other hand, the temperature stability was slightly decreased in high sterilization temperature condition. Programming of the come-up phase did not affect the temperature uniformity. In addition, the slowest cold spot was found at the bottom floor during the holding phase in all conditions. This study determined that the temperature distribution is affected by retort processing conditions, but the steam-air retort needs more validation tests for temperature stability.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.5
• /
• pp.1003-1012
• /
• 2022

The horizontal force transfer to the turbine and substructure of a wind power generation system is a very important factor in maintaining the safety of the system, but it is inevitably vulnerable to large-scale coastal disasters such as earthquakes and typhoons. Wind power generation systems built on the coast or far offshore are very disadvantageous in terms of economic feasibility due to an increase in initial investment cost because a more robust design is required when installed in areas vulnerable to coastal disasters. In this study, the GIS method was used to select the optimal site for a wind farm from the viewpoint of reducing the risk of coastal disasters. The current status of earthquakes in the West and South Seas of Korea, and the path and intensity of typhoons affecting or passing through the West and South Seas were also analyzed. Accordingly, the optimal offshore wind farm site with the lowest risk of coastal disasters has been selected and will be used as basic research data for offshore wind power projects in the region in the future.