• Journal of Wetlands Research
• /
• v.8 no.3
• /
• pp.29-38
• /
• 2006

Digital Elevation Model (DEM) of intertidal flat can be widely used not only for scientific fields, coastal management, fisheries, ocean safety, military, but also for understanding natural and artificial topographic changes of the tidal flat. In this study, we generated DEM of the Ganghwado southern intertidal flat, the largest tidal flat in the west coast of the Korean Peninsula, using waterline method and interferometric synthetic aperture radar (InSAR). Constructed DEM which applied waterline method to the Landsat-5 TM and Landsat-7 ETM+ images closely expresses overall topographic relief of tidal flat. We found that the accuracy was determined by the number of waterlines which reflect various tidal conditions. The application of InSAR to the ERS-1/2 and ENVISAT images showed that only ERS-1/2 tandem pairs successfully generated DEM in the part of northern Yeongjongdo, but construction of DEM in the other areas was difficult due to the low coherence caused by a lot of surface remnant waters. In the near future, Kompsat-2 will provide satellite images having multi-spectral and high spatial resolution within a relatively short period at different sea levels. Application of waterline method to these images will help us construct a high precision tidal flat DEM. Also, we should develop DEM generation method using single-pass microwave satellite images.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.4_1
• /
• pp.319-326
• /
• 2014

The accurate geo-referencing processes that apply ground control points is prerequisite for effective end use of HRSI (High-resolution satellite imagery). Since the conventional control point acquisition by human operator takes long time, demands for the automated matching to existing reference data has been increasing its popularity. Among many options of reference data, the airborne LiDAR (Light Detection And Ranging) data shows high potential due to its high spatial resolution and vertical accuracy. Additionally, it is in the form of 3-dimensional point cloud free from the relief displacement. Recently, a new matching method between LiDAR data and HRSI was proposed that is based on the image projection of whole LiDAR data into HRSI domain, however, importing and processing the large amount of LiDAR data considered as time-consuming. Therefore, we wmotivated to ere propose a local LiDAR chip generation for the HRSI geo-referencing. In the procedure, a LiDAR point cloud was rasterized into an ortho image with the digital elevation model. After then, we selected local areas, which of containing meaningful amount of edge information to create LiDAR chips of small data size. We tested the LiDAR chips for fully-automated geo-referencing with Kompsat-2 and Kompsat-3 data. Finally, the experimental results showed one-pixel level of mean accuracy.

• Journal of The Geomorphological Association of Korea
• /
• v.20 no.4
• /
• pp.85-99
• /
• 2013

The objective of this paper is to analyze the spatial distribution of errors in the DEM generated using waterlines from multi-temporal remote sensing data and to assess flood vulnerability. Unlike conventional research in which only global statistics of errors have been generated, this paper tries to quantitatively analyze the spatial distribution of errors from a probabilistic viewpoint using geostatistical simulation. The initial DEM in Baramarae tidal flats was generated by corrected tidal level values and waterlines extracted from multi-temporal Landsat data in 2010s. When compared with the ground measurement height data, overall the waterline-based DEM underestimated the actual heights and local variations of the errors were observed. By applying sequential Gaussian simulation based on spatial autocorrelation of DEM errors, multiple alternative error distributions were generated. After correcting errors in the initial DEM with simulated error distributions, probabilities for flood vulnerability were estimated under the sea level rise scenarios of IPCC SERS. The error analysis methodology based on geostatistical simulation could model both uncertainties of the error assessment and error propagation problems in a probabilistic framework. Therefore, it is expected that the error analysis methodology applied in this paper will be effectively used for the probabilistic assessment of errors included in various thematic maps as well as the error assessment of waterline-based DEMs in tidal flats.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.281-281
• /
• 2016

기후변화로 인한 기상학적 자연재해로부터 대비하고 안정적인 용수공급을 위해 유역의 다양한 수문 요소들에 대한 분석 필요성이 증가하고 있다. 계절적 강수량의 편차가 큰 우리나라는 유역 통합 물관리가 중요하며, 효율적 수자원 관리와 물안보 확보를 위해 유역내 물순환을 이해하는 것이 중요하다. 유역의 유출을 결정하는 요소들에는 강우, 증발산량, 토양 수분 및 지하수 등이 있으며, 시간적으로는 홍수와 같이 단기에 발생하는 유출과 장기적으로 발생하는 유출이 있다. 장기 유출은 단기 유출에 비해 토양내 수분량이 무시할 수 없을 정도로 영향을 미치게 되므로, 1년 이상의 장기 유출 해석을 위해서는 강우가 발생하지 않는 기간 동안의 토양 수분량 변화와 증발산 영향을 고려할 필요가 있다. K-water에서 자체 개발된 분포형 장단기유출 모델인 K-DRUM은 유역을 격자(grid)단위로 구분하고 각 셀들에 대한 매개변수는 흐름방향도, 표고분포도, 토지이용도, 토지피복도 등을 GIS처리하여 일괄 입력할 수 있도록 함으로써 매개변수 산정과정에서 문제가 되는 경험적인 요인을 제거하였다. 흐름의 구분은 얕은면 흐름, 지표하 흐름, 지하수 흐름으로 구분하여 운동파법과 선형저류법을 적용하였다. 또한 초기 토양함수 자동보정기법으로 실제의 기저유출량을 재현하여 전체적인 유출모의 정확도를 높였으며, FAO-56 Penman-Monteith법을 적용한 증발산량 산정모듈과 Sugawara et al.(1984)이 제안한 개념적 융설 및 적설모듈을 추가하였다. K-DRUM모형을 이용한 유출분석은 용담댐 시험유역을 대상으로 2013년도 1년간의 유출모의를 수행하였다. 입력자료는 용담댐 유역의 지형, 토양 및 토지특성 정보와 시단위 강우 및 기상정보(온도, 바람, 일사 등)를 활용하였다. 분석 결과, 총 관측유출량은 7,151 ㎥/s이고 총 계산유출량 $8,257m^3/s$이며, 관측유출량 대비 계산유출량은 약 115% 정도로 나타났다. 연간 총 강우량은 1303.5 mm로 유역면적 약 $930km^2$을 적용하여 유역 총 강우량을 산정하면 $14,030m^3/s$로서 관측유출량은 유역 총 강우량 대비 51%이고 계산유출량은 59% 정도로 나타났다. 즉 유역 유출율은 약 51% 수준으로 보통의 유역과 유사한 수준이다. 관측된 토양수분량과 K-DRUM 모형의 계산된 토양수분량을 비교하기 위하여 관측 토양수분량의 비율을 이용하여 비교하였다. 모의결과 토양수분은 강우에 의해 변화하며, 관측결과와 유사한 형태로 나타남을 알 수 있었다.

• Journal of Digital Convergence
• /
• v.17 no.11
• /
• pp.189-194
• /
• 2019

Forest investigation is the basic data for forest preservation and forest resource development, and periodical data acquisition and management have been performed. However, most of the current forest investigations in Korea are surveys to grasp the current status of forests, and various applications have not been made as geospatial information. In this study, the unmanned aerial scanner was used to acquire and process data in the forest area and to present an efficient forest survey method through analysis of the results. Unmanned aerial scanners can extract ground below vegetation, effectively creating DEM for forest management. It can be used as geospatial information for forest investigation and management by generating accurate topographical data that is impossible in conventional photogrammetry. It can also be used to measure distances between power lines and vegetation or manage transmission lines in forest areas. The accurate vertical distance measurement for vegetation surveys can greatly improve the accuracy of labor measurement and work efficiency compared to conventional methods. In the future, the use of unmanned aerial scanners will improve the data acquisition efficiency in forest areas, and will contribute to improved accuracy and economic feasibility compared to conventional methods.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.1
• /
• pp.157-165
• /
• 2011

This study is to be used as a fundamental material of rural amenity resources researches, such as excavating, establishing and modifying national agricultural landscape resources, so as to efficiently manage them. It is carried out with targeting traditional Darangyi-Rice terrace which has design factors of agricultural landscape resources. We have set up the standard range with practicable similar standard(Marginal Farmland and Less Favored Areas and etc), those of Japan, and the results of analyzing the characteristics of Darangyi-Rice terrace already known. As a result of the field investigation, it has been revealed that a great deal of Darangyi-Rice terrace are being used for not corresponding purposes, or damaged and disappeared. For preserving and well-managing Darangyi-Rice terrace as a rural landscape resource which has rural design factors, it should be advanced detailed and accurate studies on present conditions and changes of Darangyi-Rice terrace, with researches on significances, values, utilities and economical efficiency of Darangyi-Rice terrace by regions. In addition, we utilized various spatial imagery data in the researching process. Consequently, it is concluded that if high resolution imagery data is used, it can establish rather minute and accurate large-scale DB, and monitor elaborate changes as well. It is therefore thought that its application can be higher as actualizing DB hereafter.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5B
• /
• pp.459-469
• /
• 2010

This study is to develop a grid-based daily runoff model considering seasonal vegetation canopy condition. The model simulates the temporal and spatial variation of runoff components (surface, interflow, and baseflow), evapotranspiration (ET) and soil moisture contents of each grid element. The model is composed of three main modules of runoff, ET, and soil moisture. The total runoff was simulated by using soil water storage capacity of the day, and was allocated by introducing recession curves of each runoff component. The ET was calculated by Penman-Monteith method considering MODIS leaf area index (LAI). The daily soil moisture was routed by soil water balance equation. The model was evaluated for 930 $km^2$ Yongdam watershed. The model uses 1 km spatial data on landuse, soil, boundary, MODIS LAI. The daily weather data was built using IDW method (2000-2008). Model calibration was carried out to compare with the observed streamflow at the watershed outlet. The Nash-Sutcliffe model efficiency was 0.78~0.93. The watershed soil moisture was sensitive to precipitation and soil texture, consequently affected the streamflow, and the evapotranspiration responded to landuse type.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.3
• /
• pp.61-74
• /
• 2016

The purpose of this paper is to analyze the relationship between the location of the epicenter of a medium-sized earthquake(magnitude 4.8) that occurred on January 20, 2007 in the Odaesan area with lineament features using a shaded relief map(1/25,000 scale) and satellite images from LANDSAT-8 and KOMPSAT-2. Previous studies have analyzed lineament features in tectonic settings primarily by examining two-dimensional satellite images and shaded relief maps. These methods, however, limit the application of the visual interpretation of relief features long considered as the major component of lineament extraction. To overcome some existing limitations of two-dimensional images, this study examined three-dimensional images, produced from a Digital Elevation Model and drainage network map, for lineament extraction. This approach reduces mapping errors introduced by visual interpretation. In addition, spline interpolation was conducted to produce density maps of lineament frequency, intersection, and length required to estimate the density of lineament at the epicenter of the earthquake. An algorithm was developed to compute the Value of the Relative Density(VRD) representing the relative density of lineament from the map. The VRD is the lineament density of each map grid divided by the maximum density value from the map. As such, it is a quantified value that indicates the concentration level of the lineament density across the area impacted by the earthquake. Using this algorithm, the VRD calculated at the earthquake epicenter using the lineament's frequency, intersection, and length density maps ranged from approximately 0.60(min) to 0.90(max). However, because there were differences in mapped images such as those for solar altitude and azimuth, the mean of VRD was used rather than those categorized by the images. The results show that the average frequency of VRD was approximately 0.85, which was 21% higher than the intersection and length of VRD, demonstrating the close relationship that exists between lineament and the epicenter. Therefore, it is concluded that the density map analysis described in this study, based on lineament extraction, is valid and can be used as a primary data analysis tool for earthquake research in the future.

• Economic and Environmental Geology
• /
• v.47 no.6
• /
• pp.589-599
• /
• 2014

This study selected optimal sites in Myeongsasimni located in west coast of Korea for stratigraphic research containing extreme climate event during quaternary period by spatio-temporal analyses of changes in sedimentary environment and land use employing 1918 topographic map, 2000 digital terrain map, 1976 and 2012 air photographies. The study area shows no significant changes in topographic characteristics that hilly areas with relatively large variations in elevation are distributed over north and south part of the study area, and sand dues are developed along the coast line. Moreover, flat low lying areas are located at the back side of the sand dues. The movement of surface run off and sediment loads shows two major trends of inland direction flow from back sides of sand dunes and outland direction flow from high terrains inland, and the two flows merge into the stream located in the center of the study area. Two sink with individual area of $0.2km^2$ are observed in Yongjeong-ri and Jaryong-ri which are located in south central part and south part of the study area, respectively. In addition, sea level change simulation reveals that $3.4km^2$ and $3.64km^2$ are inundated with 3 m of sea level rise in 1918 and 2000, respectively, and it would contribute to chase sea level change records preserved in stratigraphy. The inundated areas overlaps well with sink areas where it indicates the low lying areas located in south cental and south part of the study area are identical for sediment accumulation. The areas with minimal human impact on sediment records over last 100 years are $3.51km^2$ distributed over central and south part of the study area with the land use changes of mud and rice field in 1918 to rice field in 2012. The candidate sites of $0.15km^2$ in central part and $0.09km^2$ in south part are identified for preferable locations of geologic record of extreme climate events during quaternary period based on the overlay analysis of optimal sedimentary environment and land use changes.

• The Journal of Engineering Geology
• /
• v.32 no.3
• /
• pp.411-420
• /
• 2022

Recently, research using remote sensing has been active in various fields such as environment, science, and society. The results of research using remote sensing are not only numerical results, but also play an important role in solving and preventing social and scientific problems. The purpose of this thesis is to tell the correlation between the data provided and each data by using remote sensing technology for the tidal flat environment. The purpose of this study is to obtain high-resolution data using artificial satellites during remote sensing to find out information on tidal flat currents. Tidal flats created by erosion, sedimentation, low tide, and high tide contain information about the tidal flat slope and information about the ecosystem. Therefore, it can be considered as one of the very important studies to analyze the overall tidal flow channel. This paper creates a DEM (Digital Elevation Model) through TanDEM-X, and DEM is used as the most basic data to create a tidal channel. The research area is a tidal flat located in the middle of the west coast of Ganghwado tidal flat. By analyzing the tidal channel created, various information such as the slope direction of Ganghwado tidal flat and the shape of the tidal channel can be grasped. It is expected that the results of this study will increase the importance and necessity of using DEM data for tidal flat research in the future, and that high-quality results can be obtained.