• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.4
• /
• pp.395-403
• /
• 2000

It is so sensitive that the matter of compensation for private possessions caused in the course of public construction planning is very important. Especially, more logical planning is necessary when the dam be constructed, because it is mainly controlled by the surface of water, and if that planning is made public, artificial change is occurred in land use in that area for the purpose of rising the compensation. In this study, the plan for the application of aerial photo based ortho image was drew up for solving these problems and for the rational, rapid compensation. Ortho image was made by aerial photo, used as reading material for the change in land use. The modeling of drainage basin, came under the planning surface of water, and the 3D simulation were performed for the scene analysis, the change understanding in land use for a lot number in a certain period by overlapping the digital image, the digital land registration map, and the digital topography map as well as the analysis of the admitted land followed by the height of reservoir water.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.6
• /
• pp.611-620
• /
• 2008

The process of sediment transport has a very complex mechanism due to waves, currents and bottom topography changes. Usually, beach erosion occurs from various causes such as non-equilibrium sediment transport condition, construction of seawall and rip currents. Therefore, when we try to reduce and develop countermeasures for beach erosion, we have to know the main mode and direction of sediment transport that causes beach erosion. In this study, the process of sediment transport on Jeonchon-Najung beach and main causes of beach erosion have been studied. Field investigation data, aerial photos and the results of numerical model test were used in the analysis. As a result, it was realized that the main causes of beach erosion at Jeonchon-Najung beach was due to the construction of fishery harbors and a seawall.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.3
• /
• pp.187-193
• /
• 2022

In the Yeongdong region of Gangwon-do, coastal areas are important resources in terms of cultural, social and economic aspects. However, the coast of Gangwon-do is experiencing severe erosion, and it is concerned that its adverse effects will gradually increase. In this study, coastline changes of Yangyang and Gangneung in Gangwon-do were tracked and analyzed over a long period of time. In order to build time series image data, aerial photos from the 1940s to the present were mainly used, and data from CORONA satellite, which operated from the 1960s to the early 1970s, were collected and used together. Using 51cm resolution ortho image and 2m resolution Digital Elevation Model(DEM) as reference, ground control points were selected to perform geometric correction on the aerial photos and CORONA images. Subsequently, Canny edge detector applied to these images to extract the coastlines. As a result of analyzing the extracted and vectorized coastlines by overlaying them in chronological order, erosion and deposition occurring around the artificial structures and on the nearby beaches were observed. In this study, the effect of seasonal variation, tide, and various coastal management including the beach filling were not considered. Because coastal erosion is greatly affected by geographic factors, each local government must find its own solution. Continuous research and local data accumulation are required.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.3
• /
• pp.23-31
• /
• 2009

The border of the shorelines in a nation is an important factor in determining the border of a national territory, but Korea's shorelines are rapidly changing due to the recent rise in sea level from global warming and growth-centered economic policy over the decades of years. This research was done centering on the areas having well-preserved shorelines as they naturally are and other areas having damaged shorelines in their vicinities due to artificial structures at the two beaches located at the neighboring areas and having mutually homogeneous ocean conditions with each other. First, this research derived the shorelines using the aerial photographies taken from 1947 until 2007 and revised the tidal levels sounding data obtained from a hydrographical survey automation system consisting of Echosounder[Echotrac 3100] and Differential Global Positioning System[Beacon]by using topographical data and ships on land obtained by applying post-processing Kinematic GPS measuring method. In addition, this research evaluated the changes and dimensional variations for the last 60 years by dividing these determined shorelines into 5 sections. As a result, the Haewundae Beach showed a total of 29% decrease rate in dimension as of the year 2007 in comparison with the year 1947 due to a rapid dimensional decline centering on its west areas, while the dimension of the Gwanganri Beach showed an increase in its dimension amounting to a total of 69% due to the decrease in flow velocity by artificial structures built on both ends of the beach-forming accumulation; thus, it was found that there existed a big difference in deposition & accumulation tendency depending on neighboring environment in spite of the homogeneous ocean conditions.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.2
• /
• pp.57-68
• /
• 2004

Recently in order to more effectively and scientifically process forest official tasks, which have been focused on documents and inventories, they should be applied with the up-to-date spatial information technologies. Especially, the forest resource information management based on GIS(geographic information system) and aerial orthophoto is expected not only to play an important role as DSS(decision support system) for domestic forest conservation policy and forestry development industry but also to service forest resource information toward people such as the owners of a mountain rapidly. In this study, the important forest information such as digital topography map, digital forest type map, digital forest cadastral map, digital aerial photographs and attribute data were first reprocessed and constructed in DBMS(data base management system). In addition, forest officials could analyze and retrieve forest information by using detail sub-application systems such as forest cadastral retrieval, forest land development information management, reserved forest information management and forest resource information retrieval. For this, the user interface is developed by using Visual Basic 6.0 and MapObjects 2.1 of ESRI based on CBD(component based development) technology. The result of developing this system will not only perform constructing economical forest and better environment but also be the foundation of domestic spatial technology for forest resource management.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2005.05a
• /
• pp.281-286
• /
• 2005

여러 분야에서 활용성이 증가하고 있는 도시지역에 대한 3차원 모형화 구축은 기존에는 항공사진이나 고해상도 위성영상을 주로 활용하여 왔으나, 최근에는 높은 정밀도를 보장하는 항공LIDAR 측량기법에 대한 연구가 활발히 진행되고 있다. 특히, 다양한 형태, 크기, 종류의 건물들이 존재하는 광범위한 도시지역을 모형화 하기 위하여 정밀도가 높은 LIDAR 자료를 통하여 신속하고 정확하게 현실에 가까운 건물 모형으로 복원하는 기술 개발이 요구되고 있다. 본 연구에서는 LIDAR 관측자료 및 디지털 영상, 수치지도 등의 자료를 활용하여 LIDAR자료의 전처리 과정과 다양한 필터를 적용하여 지면과 비지면 정보를 분류하였으며, LoG 연산자에 의한 건물 경계선 및 특징점 추출기법을 개발하여 도시 지역의 3차원 건물 복원기법을 제안하였다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.2
• /
• pp.41-47
• /
• 2008

The import of cartography is spoke for surveying technique level of the country. Also, it is the implied expression means about international operations amount in the world of people in the country. Nowadays, various digital maps on a reduced scale were drawn in Korea including the topographic series of a nation. Though these digital maps are drawn and revised by using aerial photogrammetry or satellite image, there are some problems that it is difficult to revise or renew the topography and natural feature immediately which changes frequently. As the countermeasures of these problems we use 3D Laser Scanning accumbency method, which provides user with convenience and accumbency accuracy which is required to revise and renew digital maps.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.3
• /
• pp.313-322
• /
• 2005

Rapid advances in technology and changes in human and cultural activities bring about changes to the earth surface in terms of spatial extension as well as time frame of the changes. Such advances introduce shorter updating frequency of maps and geospatial database. To satisfy these requirements, recent research efforts in the geoinformatics field have been focused on the automation and speeding up of the mapping processes which resulted in products such as the digital photogrammetric workstation, GPSIINS, applications of satellite imagery, automatic feature extraction and the LiDAR system. The possibility of automatically extracting buildings and generating contours from airborne LiDAR data has received much attention because LiDAR data produce promising results. However, compared with the manually derived building footprints using traditional photogrammetric process, more investigation and analysis need to be carried out in terms of accuracy and efficiency. On the other hand, generation of the contours with LiDAR data is more efficient and economical in terms of the quality and accuracy. In this study, the effects of various conditions of the pre-processing phase and the subsequent building extraction and contour generation phases for digital mapping have on the accuracy were investigated.

• Spatial Information Research
• /
• v.13 no.1 s.32
• /
• pp.31-41
• /
• 2005

In order to carry out aerial photogrammetry using GPS/INS, it is necessary to apply exterior orientation parameters, obtained while making a photo, to the editing process. It should be noted that the verification process of aerial mapping result is the most crucial process at the GPS/INS based digital photogrammetry. To this end, this study has compared the mapping result by the ways of AT results, plotter, and orientation, which is from basis of the Analytical raw map produced by the existing AT results. When comparing the horizontal and vertical accuracy of the analytical mapping with that of digital restitution, it could be found that the latter is more accurate than that of the former. In addition, it was reveled that the horizontal error was bigger than that of vertical one. Even though the accuracy of the GPS/INS based AT Direct orientation was three times poorer than the of indirect one, it was recognized that the photogrammetry process was effectively performed in the application of scale 1:5000 mapping with satisfying the allowance errors.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.26-26
• /
• 2021

본 연구에서는 2020년 산사태가 발생한 곡성지역을 대상으로 무인항공기 사진측량을 통하여 산사태 지역의 범위와 변위를 조사하고 이를 기반으로 산사태에 의한 피해범위를 LS-RAPID에서 분석하였다. LS-RAPID는 지진과 강우의 영향을 반영하는 산사태 시뮬레이션 모델이며, 산사태 운동시작여부를 평가하며 만일 발생 시 토사의 이동, 퇴적 범위, 토사층의 깊이를 예측할 수 있다. 산사태 시뮬레이션에서 중요한 변수 중의 하나는 지중의 활동층의 깊이와 분포이다. 재해현장에서 이런 자료를 신속하고 정량적으로 측정하기 위한 방법으로서 무인항공기를 이용한 측량을 실시하였다. 또한 산사태 토사의 이동과 퇴적을 검증하기 위한 자료도 획득하였다. 매개변수의 추정 시선행연구에서 제시된 값을 참고하여, 재해현장의 피해범위와 규모를 비교하여 매개변수를 추정하여 다른 연구사례에서 이용한 값들과 비교, 분석하였다. 또한, 시뮬레이션의 지형입력자료로서 무인항공기 사진 측량자료에서 생성된 DSM(Digital Surface Model)과 수지지도에서 생성한 DEM(Digital Elevation Model)을 적용한 경우, 시뮬레이션 결과에 영향을 비교, 분석하였다. 결과적으로 DEM보다 DSM을 적용하는 것이 퇴적범위가 크게 확대되지 않으며, 현장을 잘 반영한 결과가 얻어지는 것으로 평가되었다.