• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.5
• /
• pp.418-428
• /
• 2007

In the calculation of wave propagation by Boussinesq equation model, it is very common to experience numerical noises generated from nonlinear interaction and breaking wave occurrence, and the numerical solution is rapidly diverged unless the noises are properly controlled. A comparative study was here undertaken for the characteristics of three different lowpass filters (FFT filter, Gaussian filter and Shapiro filter) which are all designed to be applied to the interim results of numerical calculation. The numerical results obtained with application of respective filter techniques were compared with the results of an existing hydraulic experiment for the aspects of noise suppression, conservation of main signal and altering time. The results show that the Shapiro filter can be best applied with optimal choices of its element number, pass number and filtering tune interval. The combination of the number of filter element off, pass number of 50 or less, and application interval of 100 to 200 time steps generally showed good performance in both accuracy and efficiency of the numerical calculation.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.11a
• /
• pp.419-422
• /
• 2002

저자는 등각사상을 추하기 위한 기존의 여러 Theodorsen 방정식의 해법 중 가장 유효한 해법으로 알려져 있는 Wegmann의 방법을 다룬바 있다. Wegmann의 방법으로 수치실험을 한 결과 난이도가 높다고 예상되는 문제에 있어 수렴했다가 발산을 하는 불안정현상이 나타났으며 수렴하지 않는 불안정현상의 원인을 분석하여 저주파필터를 적용한 새로운 반복법을 제안하여 Wegmann 방법으로는 발산하는 모든 문제에 있어서 수렴하는 수치실험 결과를 얻었다[1]. 본 논문에서는 저주파필터를 적용한 해법에 의해 수치적으로 수렴한 결과를 이론적으로 증명한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.285-285
• /
• 2017

최근 전 세계적으로 심각해지는 물 부족 현상과 수질오염으로 대량의 원수를 빠른 시간 내에 여과하기 위한 여과장치의 개발 및 효율성 향상을 위한 연구의 필요성이 증가되고 있다. 특히 여과필터의 내부구조에 의해 유동이 편중되는 현상이 발생하면 여과효율 및 여과필터 유지관리에 문제가 발생되기 때문에 최적의 여과필터를 설계하는 것이 중요하다. 이에 본 연구에서는 수리모형실험으로 검토하기에 어려움이 있는 여과기 내부구조에 대한 유동특성을 수치해석을 이용하여 검토하였다. 수치해석은 유한요소법 기반의 수치모형으로 여과기 내부를 상세하게 모의할 수 없기 때문에 유한체적법 기반인 ANSYS CFX 모형을 이용하였다. 여과기 내 여과필터는 두께 2.0 mm, 공극율 25%로 가정하고 다공성 기법(porous media)을 적용하였다. 검토를 위한 경계조건은 유입부에 목표 취수량, 유출부에 대기압 조건을 적용하였으며, 여과기에 비해 매우 작게 구성된 여과필터 내부의 유동특성을 검토하기 위해 여과기는 최소 3.0 mm, 여과필터는 1.0 mm의 격자를 적용하였다. 현재 실제 여과시설에 적용되고 있는 여과기 제품 형상을 기준으로 여과기 내부 흐름공간의 크기 및 각도 조정에 따른 유동특성을 검토하여 여과효율을 비교하였으며 통과유량, 유속, 유속벡터 등을 검토하여 균등한 유량과 유속이 발생되는 최적의 여과장치 구조를 도출하였다. 본 연구에서 여과기 내부 구조 변경에 따른 유동특성 검토를 통해 도출된 최적의 여과기 내부크기 및 각도에 대한 설계인자는 여과기 내 여과필터의 효율을 증가시킬 뿐만 아니라 내구성 증진에 도움이 될 것으로 예상된다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.3
• /
• pp.213-220
• /
• 2007

Appropriate numerical models for the simulation of off-gas flow in hot area of the vitrification plant have been developed in this study. The models have been applied to analyze the effect of design parameters of real plant and numerical analyses have been performed for CCM(Cold Crucible Melter), pipe cooler and HTF(High Temperature Filter). At first, the effect of excess oxygen and the ratio of oxygen distribution on combustion characteristics in the CCM has been studied. Next, solidification behavior of radio nuclide in the pipe cooler has been numerically modeled and scrutinized. Finally, flow pattern in accordance with the location of off-gas entrance of the HTF has been compared.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.9 no.2
• /
• pp.139-149
• /
• 1991

In general, Digital Elevation Models(DEM) are constructed in a grid format for this form is advantageous to capture data automatically and is easy to manipulate. But, grid DEM requires vast volumes of data to represent terrain features finely and accurately as its data is sampled in a regular space. This paper aims at constructing compact DEM by selecting the significant points from grid DEM which affect well the terrain features. For the purpose, the significant points is detected by the high-pass filtering using Laplacian operator and gradient operator. The results of this study show that the Laplacian operator is more efficient than the gradient operator in selecting the significant points for compact DEM.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.1
• /
• pp.55-62
• /
• 2007

Recent advances in airborne LiDAR technology allow rapid and inexpensive measurements of topography over large areas. The generation of DTM/DEM is essential to numerous applications such as the fields of civil engineering, environment, city planning and flood modeling. The demand for LiDAR data is increasing due to the reduced cost for DTM generation and the increased reliability, precision and completeness. In order to generate DTM, measurements from non-ground features such as building and vegetation have to be classified and removed. In this paper, a segmented morphology filter was developed to detect non-ground LiDAR measurements. First, segments LiDAR point clouds based on the elevation. Secondly classifies those protruding segments into non-ground points. Those non-ground points such as building and vegetation are removed, while ground points are preserved for DTM generation. For experiments, data sets used in Comparison of Filters (ISPRS, 2003) depicting urban and rural areas were selected. The experimental results show that the proposed filter can remove most of the non-ground points effectively with less commission and omission errors.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.11a
• /
• pp.69-78
• /
• 2005

Appropriate numerical models for the simulation of off-gas flow in hot area of the vitrification plant have been developed in this study. The models have been applied to analyze the effect of design parameters of real plant and numerical analyses have been performed for CCM(Cold Crucible Melter), pipe cooler and HTF(High Temperature Filter) At first, the effect of excess oxygen and the ratio of oxygen distribution on combustion characteristics in the CCM has been studied. Next, solidification behavior of radio nuclide In the pipe tooler has been numerically modeled and scrutinized. Finally, flow pattern In accordance with the location of off-gas entrance of the HTF has been compared.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.821-824
• /
• 2009

Conformal mapping is useful to solve problems in physics, engineering and so on. This paper is to discuss the numerical conformal mapping from the unit disk onto Jordan region, which can be solved by Theodorsen equation. Wegmann's method has been known as the most efficient one for the Theodorsen equation. However, we found divergence through numerical experiments by the iterative method of Wegmann. The divergence occurs especially when some degree of difficulty is high. We analyze the cause of divergence and propose an improved method by applying a low frequency pass filter to Wegmann's method. By this proposed method we can get a stable convergence for all the problems which was unstable with the Wegmann's method.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.01a
• /
• pp.13-14
• /
• 2019

비콘을 이용해서 위치를 측정하기 위해서는 안정적인 RSSI 수치가 필요하다. 그러나 실제 수집된 RSSI 수치는 불규칙적이고, 이상치가 많은 형태를 취한다. 이에 수집된 RSSI 수치를 바로 적용하게 된다면, 이상치가 많이 발생하는 RSSI 특성상 위치 측정의 정확성이 많이 떨어지게 된다. 본 논문에서는 이를 해결하기 위하여 수집된 RSSI 수치에 칼만 필터링과 이동평균을 동시에 적용하였다. 이를 통해 더 안정적이고 더 믿을 수 있는 RSSI 수치를 얻을 수 있었다. 이 방법을 통해서 더 정확한 측정이 가능하였다.

• Journal of the Korean earth science society
• /
• v.34 no.1
• /
• pp.51-58
• /
• 2013

An appropriate determination of time step is one of the important problems in atmospheric modeling. In this study, we investigate the sensitivity of numerical solutions to time step in a nonlinear atmospheric model. For this purpose, a simple nondimensional dynamical model is employed, and numerical experiments are performed with various time steps and nonlinearity factors. Results show that numerical solutions are not sensitive to time step when the nonlinearity factor is not influentially large and truncation error is negligible. On the other hand, when the nonlinearity factor is large (i.e., in a highly nonlinear regime), numerical solutions are found to be sensitive to time step. In this situation, smaller time step increases the intensity of the spatial filter, which makes small-scale phenomena weaken. This conflicts with the fact that smaller time step generally results in more accurate numerical solutions owing to reduced truncation error. This conflict is inevitable because the spatial filter is necessary to stabilize the numerical solutions of the nonlinear model.