• Title/Summary/Keyword: 수축훈련

Search Result 50, Processing Time 0.025 seconds

Study on the Short-Term Hemodynamic Effects of Experimental Cardiomyoplasty in Heart Failure Model (심부전 모델에서 실험적 심근성형술의 단기 혈역학적 효과에 관한 연구)

  • Jeong, Yoon-Seop;Youm, Wook;Lee, Chang-Ha;Kim, Wook-Seong;Lee, Young-Tak;Kim, Won-Gon
    • Journal of Chest Surgery
    • /
    • v.32 no.3
    • /
    • pp.224-236
    • /
    • 1999
  • Background: To evaluate the short-term effect of dynamic cardiomyoplasty on circulatory function and detect the related factors that can affect it, experimental cardiomyoplasties were performed under the state of normal cardiac function and heart failure. Material and Method: A total of 10 mongrel dogs weighing 20 to 30kg were divided arbitrarily into two groups. Five dogs of group A underwent cardiomyoplasty with latissimus dorsi(LD) muscle mobilization followed by a 2-week vascular delay and 6-week muscle training. Then, hemodynamic studies were conducted. In group B, doxorubicin was given to 5 dogs in an IV dose of 1 mg/kg once a week for 8 weeks to induce chronic heart failure, and simultaneous muscle training was given for preconditioning during this period. Then, cardiomyoplasties were performed and hemodynamic studies were conducted immediately after these cardiomyoplasties in group B. Result: In group A, under the state of normal cardiac function, only mean right atrial pressure significantly increased with the pacer-on(p<0.05) and the left ventricular hemodynamic parameters did not change significantly. However, with pacer-on in group B, cardiac output(CO), rate of left ventricular pressure development(dp/dt), stroke volume(SV), and left ventricular stroke work(SW) increased by 16.7${\pm}$7.2%, 9.3${\pm}$3.2%, 16.8${\pm}$8.6%, and 23.1${\pm}$9.7%, respectively, whereas left ventricular end-diastole pressure(LVEDP) and mean pulmonary capillary wedge pressure(mPCWP) decreased by 32.1${\pm}$4.6% and 17.7${\pm}$9.1%, respectively(p<0.05). In group A, imipramine was infused at the rate of 7.5mg/kg/hour for 34${\pm}$2.6 minutes to induce acute heart failure, which resulted in the reduction of cardiac output by 17.5${\pm}$2.7%, systolic left ventricular pressure by 15.8${\pm}$2.5% and the elevation of left ventricular end-diastole pressure by 54.3${\pm}$15.2%(p<0.05). With pacer-on under this state of acute heart failu e, CO, dp/dt, SV, and SW increased by 4.5${\pm}$1.8% and 3.1${\pm}$1.1%, 5.7${\pm}$3.6%, and 6.9${\pm}$4.4%, respectively, whereas LVEDP decreased by 11.7${\pm}$4.7%(p<0.05). Comparing CO, dp/dt, SV, SW and LVEDP that changed significantly with pacer-on, both under the state of acute and chronic heart failure, augmentation widths of these left ventricular hemodynamic parameters were significantly larger under the state of chronic heart failure(group B) than acute heart failure(group A)(p<0.05). On gross inspection, variable degrees of adhesion and inflammation were present in all 5 dogs of group A, including 2 dogs that showed no muscle contraction. No adhesion and inflammation were, however, present in all 5 dogs of group B, which showed vivid muscle contractions. Considering these differences in gross findings along with the following premise that the acute heart failure state was not statistically different from the chronic one in terms of left ventricular parameters(p>0.05), the larger augmentation effect seen in group B is presumed to be mainly attributed to the viability and contractility of the LD muscle. Conclusion: These results indicate that the positive circulatory augmentation effect of cardiomyoplasty is apparent only under the state of heart failure and the preservation of muscle contractility is important to maximize this effect.

  • PDF

The effect of abdominal drawing-in maneuver and pelvic floor muscle contraction in individuals with and without low back pain (요통유무에 따른 복부 드로우인과 골반바닥근 수축훈련이 배가로근과 골반바닥근에 미치는 영향)

  • Youn, Hye-Jin;Kim, Ji-Seon
    • Journal of the Korean Society of Physical Medicine
    • /
    • v.11 no.1
    • /
    • pp.53-60
    • /
    • 2016
  • PURPOSE: This study aimed to identify differences in the thickness of the transverse abdominis (TrA) and pelvic floor muscles (PFM) between those with (LBP) and without low back pain (non-LBP). The standardized methods of contraction for the TrA and PFM were used to perform the abdominal draw-in maneuver (ADIM) and pelvic floor muscle contraction (PFC), respectively. METHODS: This study included 27 young men and women, who were verbally instructed regarding the maneuvers (LBP, n=14; non-LBP, n=13). For all subjects, TrA and PFM thickness were evaluated by ultrasonography during ADIM and PFC. RESULTS: The results of this study showed that TrA thickness increased during ADIM and PFC to a greater degree in the non-LBP group than in the LBP group (p < 0.01). PFM thickness increased more during PFC in the non-LBP group than in the LBP group (p < 0.05). Both groups showed greater increases in TrA thickness during ADIM than during PFC (p < 0.01), and greater increases in PFM thickness during PFC than during ADIM (p < 0.05). CONCLUSION: These results suggest that receiving verbal instructions on how to use each muscle for a specific maneuver was more beneficial than other verbal instruction. Further studies are needed determine how our results may be applied beneficially in research on this topic.

Changes in Electromyogram Signals from the Tibialis Anterior Muscle Resulting from Maximal Voluntary Contraction Exercise (최대수의적 수축훈련에 의한 앞 정강근의 근전도 신호의 변화)

  • Song, Su-Young;Hwang, Ki-Kyeong;Kim, Moon-Jeong;Lee, Jeong-Woo
    • Journal of the Korean Academy of Clinical Electrophysiology
    • /
    • v.9 no.2
    • /
    • pp.1-6
    • /
    • 2011
  • Purpose : This study aims to examine changes in electromyogram (EMG) signals detected from the tibialis anterior muscle during repetitive contraction exercises in normal female adults. Methods : The subjects of this study were 10 normal adult females without any musculoskeletal or nervous system disorders. A total of 30 contractions were made repetitively with maximal voluntary contraction exercise for six seconds and a resting time for three seconds. Changes in muscle contractions were measured using dynamometer and EMG signals such as root mean square (RMS), integrated EMG (IEMG), and median frequency (MDF). Results : The result of measurement showed no significant differences in IEMG and RMS in accordance with the increase in the number of contractions. MVIC and MDF showed significant differences in accordance with the increase in the number of contractions (p<0.05). Conclusion : This study demonstrated that repetitive tibialis anterior muscle contraction resulted in a significantly different MVIC and MDF but no significant differences in IEMG and RMS. Therefore, compared to other lower leg muscles, the tibialis anterior muscle is a low-frequency muscle and therefore electrophysiological characteristics of the muscle should be considered in different exercise methods.

Development and Applications of a Wireless Bioelectric Signal Measurement System on the Electrodes (전극 상의 일체형 무선 생체전기신호 측정 시스템 개발 및 응용)

  • Joo, Se-Gyeong;Kim, Hee-Chan
    • Journal of Sensor Science and Technology
    • /
    • v.12 no.2
    • /
    • pp.88-94
    • /
    • 2003
  • Electromyogram (EMG) is the bioelectric signal induced by motor nerves. Analyzing EMG with the movement produced by muscle contraction, we can provide input commands to a computer as a man-machine interface as well as can evaluate the patient's motional abnormality. In this paper, we developed an integrated miniaturized device which acquires and transmits the surface EMG of an interested muscle. Developed system measures $60{\times}40{\times}25mm$, weighs 100g. Using an amplifier circuitry on the electrodes and the radio frequency transmission, the developed system dispenses with the use of cables among the electrodes, amplifier, and the post processing system (personal computer). The wiring used in conventional systems can be obstacle for natural motion and source of motion artifacts. In results, the developed system improves not only the signal-to-noise ration in dynamic EMG measurement, but also the user convenience. We propose a new human-computer interface as well as a dynamic EMG measurement system as a possible application of the developed system.

Changes of Postprandial Blood Pressure of Elderly in Nursing Homes by Position (시설 거주 노인의 식사 후 체위에 따른 혈압의 변화양상)

  • Son, Jung Tae;Lee, Eunjoo;Park, Ji Hyun
    • 한국노년학
    • /
    • v.32 no.3
    • /
    • pp.689-701
    • /
    • 2012
  • The purposes of this study were to identify the changes of postprandial blood pressure and pulse rates of elderly living in nursing homes by time and position after a meal. Blood pressure and pulse rates of 141 elderly aged over 65 years were measured at before the meal to 90 minutes after the meal by 15 min. interval. Data were analyzed by descriptive statistics, repeated measures of ANOVA, ANCOVA, and t-test using the SPSS program. There were no significant differences in change of systolic blood pressure and pulse rates by time between sitting group and lying group after meal. The biggest drops in systolic pressure in sitting and lying position were occurred at 30 min and 45min respectively after the meal. There were no significant change in pulse rates except for the immediately after meal in lying position. To prevent complications of postprandial blood pressure reduction, nurses should carefully monitor blood pressure of elderly in lying position at least from 30 min. till to 90 min. after the meal.

Tenorrhaphy using Suture anchor in delayed rupture of the flexor digitorum profundus tendon in the distal phalanx - A case report - (Suture anchor를 이용하여 건봉합술을 시행한 심수지 굴건 지연파열 - 증례 보고 -)

  • Kim, Seong Wan;Yi, Seung Rim;Yang, Bo Kyu;Kim, Woo;Lee, Sung Yup
    • Journal of Korean Orthopaedic Sports Medicine
    • /
    • v.10 no.2
    • /
    • pp.117-120
    • /
    • 2011
  • Avulsion rupture of the flexor digitorum profundus tendon at the distal phalanx is a rare injury. It usually occurs during extension of the DIP joint, while the flexor digitorum profundus tendon is contracted, or when strong extension force is applied, to the distal phalanx. We experienced a patient, combat policeman who had avulsion rupture of flexor digitorum profundus tendon at the distal phalanx after 2 days of combat exercise. Here, we would like to report unusual case of rare tendon injury with studies from other papers.

  • PDF

Initiation and Termination of Electromyographic Activity in the Early Hemiparetic Wrist (초기 편마비 환자의 손목에서 근수축 개시 및 종료의 지연)

  • Chung, Yi-Jung;Cho, Sang-Hyun;Kwon, Oh-Yun;Lee, Young-Hee
    • Physical Therapy Korea
    • /
    • v.10 no.4
    • /
    • pp.95-103
    • /
    • 2003
  • 본 연구는 초기 편마비 환자의 손목에서 표면근전도 분석을 통해 근수축 개시 및 종료의 특성들을 알아보고, 임상적인 치료방법의 기초를 제안하고자 실시하였다. 연구대상자는 원주기독병원에 뇌졸중으로 입원한 환자 중 발병 후 3개월 미만인 13명과 원주시에 거주하는 대조군 7명이었다. 근수축 개시 및 종료의 지연은 표면근전도를 이용하여 손목굽힘근과 손목펴짐근에서 손목관절의 굽힘과 폄동작 시 3초의 근전도 신호음에 따라 가장 빠르고 강하게 최대 등척성 수축과 이완을 하여 신호를 수집하였다. 그 결과 편마비 환자의 환측은 건측과 대조군에 비해 손목관절 굽힘과 폄동작에서 근수축 개시및 종료가 유의하게 지연되었으며, 개시보다 종료가 더 유의하게 지연되었다. 따라서 초기 뇌졸중 환자의 근약화는 근육의 개시 및 종료의 반응시간 지연에 영향을 준다고 볼 수 있다. 앞으로 운동조절과 연관되어 기능적인 회복을 유도할 수 있는 근수축의 민첩성 훈련과 근섬유 동원의 효율성을 증진시키기 위한 치료방법들이 연구되어야 할 것이다.

  • PDF

The Effects of Leg Raising with Voluntory Lumbo-pelvic Contraction on Abdominal Muscle Activation (허리 골반의 수의적 조절을 병행한 다리 들기가 배근육 활성에 미치는 영향)

  • Park, Min-Chull;Lee, Sang-Yeol;Jang, Jun-Hyeok;Hong, Min-Ho
    • Journal of the Korean Society of Physical Medicine
    • /
    • v.8 no.1
    • /
    • pp.147-151
    • /
    • 2013
  • 연구목적: 본 연구는 허리 골반의 수의적 조절을 동반한 다리 들기 운동이 배 근육에 미치는 영향을 알아보기 위하여 엉덩 관절의 벌림 각도에 따라 다리 들기 시 배근육의 활성도를 확인하였다. 연구방법: 20대 정상성인을 대상으로 엉덩 관절 벌림각도($0^{\circ}$, $30^{\circ}$)에서 압력 센서 사용 그룹과 사용하지 않는 그룹으로 나우어 다리 들기를 실시하는 동안 복부 근육의 근활성도를 측정하였다. 연구결과: 엉덩 관절 벌림 $0^{\circ}$$30^{\circ}$ 모두에서 오른쪽 다리를 들어 올리는 동안 반대측 내복사근과 동측 외복사근에서 수의적 조절을 한 그룹과 하지 않은 그룹 사이에 통계적인 유의한 차이를 보였다(p<.05). 결론: 허리 골반의 수의적 조절을 통한 다리 들기 시 몸통 안정성의 증가를 통하여 안정적인 배 근육 강화 훈련을 수행 할 수 있을 것으로 생각되며 요통 환자에게도 안정적인 임상적용이 기대된다.

Review of characteristics of the isotonic combination: Importance of eccentric training (등장성 수축 결합기법의 특성에 대한 고찰 - 원심성 훈련의 중요성 -)

  • Kim, Mi-hyun;Bae, Sung-soo
    • PNF and Movement
    • /
    • v.2 no.1
    • /
    • pp.25-33
    • /
    • 2004
  • Purpose : The purpose of this article is to summarize the characteristics of isotonic combination. Method : Some studies of the motor unit activation patterns during isometric, concentric, and eccentric actions, neural strategies in the control of muscle force, and concentric versus combined concentric-eccentric training were reviewed. Results & Conclusions : Eccentric torque may be relatively higher than concentric torque for two potential reasons: 1) stretch responses in the antagonist are not elicited to restrain the motion as can occur concentrically and 2) stretch responses in the agonist may augment eccentric torque production. Concentric-eccentric training has a greater influence on functional capacity than that of concentric training. Both maximal force and average force throughout the motion were significantly higher when the dynamic action was started with preactivation as compared to the mode without preactivation. The peak torques observed during the concentric phase of the eccentric-concentric muscle actions were higher than those noted in the pure concentric contraction.

  • PDF

A Study on Practical Engineering Model for Tool Temperature Control (금형온도제어에 대한 실천공학모형 연구)

  • Shin, Ju-Kyung
    • Journal of Practical Engineering Education
    • /
    • v.10 no.2
    • /
    • pp.89-94
    • /
    • 2018
  • In injection molding, the tool temperature has a great influence on the quality of the molded article. The appropriate temperature is determined by the molding material and the quality required for the molded part, and the important point is that the temperature should be stable. First, the tool temperature should be set in accordance with the quality required by the molded article within the range of the tool temperature conditions suitable for the material. That is, the tool temperature changes depending on the importance of the surface gloss of the molded article, shortening of the molding cycle, prevention of deformation, degree of shrinkage, ease of resin flow and the like. In order to improve practical tool technology, we propose a training model of the difficult process of tool temperature control which can be utilized in industry that design and manufacture injection mold.