그림 1. 금형온도와 사출압력에 의한 변형 Fig. 1. Deformation due to mold temperature and injection pressure.
그림 2. 냉각시스템을 이용한 사출성형공정 Fig. 2. Injection molding process using cooling system.
그림 3. 부적정한 캐비티 온도에 의한 사출 성형품 Fig. 3. Molded parts by improper cavity temperature.
그림 4. 학습 단원 별 만족도 분석 Fig. 4. Satisfaction analysis for learning unit.
표 1. 성형조건의 인자와 영향 Table 1. Factors and influences of molding conditions
표 2. 열 교환 계산과 캐비티 재료 선택에 필요한 자료 Table 2. Data required for heat exchange calculations and selection of cavity materials
표 3. 캐비티 온도가 제품 품질에 미치는 영향 Table 3. Effects of cavity temperature on product quality
표 4. 금형온도제어를 위한 금형기술 훈련과정. Table 4. Tooling technology training course for mold temperature control
References
- B. K. Park, "Invigoration of industry-university cooperation for industrial human resource development," Engineering Education, vol. 12, no. 3, pp. 14-20, 2005.
- K. W. Kim, B. J. Ghang, and W. Y. Lee, "A case study on vocational education & training for the youth employment enhancement: Focused on analysis of performance indicator in youth employment academy," Journal of Practical Engineering Education, vol. 5, no. 2, pp. 123-127, December 2013. https://doi.org/10.14702/JPEE.2013.123
- C. H. Oh, B. H. Kim, J. I. Kim, J. H. Ha, K. H. Ahn, and N. S. Kim, "Research on actual state and improving suggestion for practical engineering technician," KUT-HRD Research Center, Research Report 2010-01, February 2011.
- D. H. Lee, D. C. Kang, K. Yi, and K. H. Jung, "An education-oriented industry and university collaboration model a case study of LG electronics and Handong University," Journal of Engineering Education Research, vol. 7, no. 3, pp. 32-38, May 2004.
- E. J. Song, "Practical engineering teaching method: A study on methodology for teaching improvement on the university," Journal of Practical Engineering Education, vol. 4, no. 1, pp. 45-50, June 2012.
- J. P. Beaumont, Runner and gating design handbook, Hanser, Munich, pp. 27-33, 2004.
- R. A. Malloy, "Plastic part design for injection molding," Hanser, Munich, pp. 75-84, 1994.
- O. Zollner, "Optimized mould temperature control," Plastic Business Group, Application Technology Information (1104 d,e), 1997.
- G. Menges and P. Mohren, "How to make injection molds," Hanser, Munich, pp. 272-278, 1994.