• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.1
• /
• pp.48-54
• /
• 2010

Purpose: The objective of this study was to evaluate and compare the accuracy of impression body taking by the closed and the open tray impression technique with 3 types of impression tray. Individual tray, metal stock tray and polycarbonate tray were used. Materials and methods: Nine closed tray impressions were taken by individual tray, metal stock tray and polycarbonate stock tray, respectively with polyether impression material. 9 open tray impressions were also acquired by same manner. Precision analysis on the master models was performed by attaching the reference frameworks with alternate single screws and measuring the vertical fit discrepancy of respective analogues in working cast with a stereo microscope. Data were analyzed by 1 way ANOVA and independent t-test. Results: The average fit accuracy of impression bodies was calculated. With the closed tray impression technique, there were significant statistical differences in vertical fit discrepancy according to the types of tray. The individual tray group showed the lowest value and the polycarbonate stock tray group represented the highest. With the open tray impression technique, there was no significant difference in vertical fit discrepancy. Significant statistical difference in vertical fit discrepancy was found between the open and the closed impression technique with the polycarbonate stock tray. Conclusion: From the results above, more precise impressions could be acquired by the rigid individual tray compared with the polycarbonate stock tray. It was hard to get consistent accuracy impressions by the closed tray impression technique with polycarbonate stock trays.

• Korean Journal of Medicinal Crop Science
• /
• v.15 no.6
• /
• pp.367-370
• /
• 2007

To make the soil moisture proper is the important factor in the seedbed cultivation of Yangjik for producing a good quality of ginseng seedling. This study was carries out to investigate the effect of soil moisture on photosynthesis and yield of ginseng seedling under the different condition of the soil moisture, such as $100{\sim}400$ mbar. Photosynthesis rate was decreased gradually by the reduction of soil moisture, and in particular it was decreased distinctly under the lower condition of soil moisture, such as $300{\sim}400$ mbar. Photosynthesis rate in air temperature of $30^{\circ}C$ was decreased more distinct than that of $25^{\circ}C$, Light saturation point of leaves was at the quantum of $600{\mu}mol/m^3/s$ at $25^{\circ}C$ while it was decreased by $300{\mu}mol/m^3/s$ at $30^{\circ}C$ according to the increase of air temperature. Respiration rate was increased by the increase of quantum, and decreased by the reduction of soil moisture. Respiration rate under the condition of high quantum was increased regardless of air temperature, but it was decreased distinctly under the condition of low soil moisture and high air temperature, such as 400 mbar at $30^{\circ}C$. There were a gradual decrease by the reduction of soil moisture in leaf length, leaf width, chlorophyll content, and water content of leaves, but heat injury ratio was increased distinctly by the reduction of it. Total root weight, root weight per plant, the yield of usable seedling were decreased by the reduction of soil moisture, and optimal content of soil moisture to produce a good quality of seedling was 63% of field capacity or 18.9% in absolute soil moisture content.

• Microbiology and Biotechnology Letters
• /
• v.42 no.2
• /
• pp.162-169
• /
• 2014

In the course of study for the development of functional food using red beans (azuki beans, Phaseolus radiatus L.), the ethanol extracts from raw-red bean (RRB) and boiled-red bean (BRB) were prepared, and the components and various biological activities of both were compared. It was observed that the extraction yield, and the total polyphenol content, of the BRB were 1.2 times higher than that of the RRB. However, the contents of total flavonoid, total sugar and reducing sugar in the BRB were 30, 27.9 and 30.8% respectively when compared with those of RRB. In relation to antioxidative activity, both RRB and BRB exhibited moderate DPPH anion, ABTS cation, and nitrite scavenging activities and reducing power, though in all cases RRB demonstrated stronger activities than BRB. The extracts of RRB and BRB did not reveal any antimicrobial activities. In a ${\alpha}$-amylase inhibitory activity assay, RRB was higher than BRB, while BRB showed higher ${\alpha}$-glucosidase inhibitory activity than RRB. A strong and particular activity was observed in an anti-thrombosis activity assay of RRB. The extract of RRB demonstrated strong inhibitions against prothrombin and blood coagulation factors, with moderate thrombin inhibition. However, the extract of BRB did not exhibit any significant anti-thrombosis activity. Our results indicate that RRB has different, but useful biological activities, and loss or elimination of the biologically active substances in RRB occurs during the production of BRB. Therefore, to develop more functional foods from red beans, a study of suitable boiling, heating and drying processes is essential, and the efficient re-use of boiled waste water from the boiling process is necessary. These results could be applied to the further development of functional red bean beverages and sweat red bean pastes.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.3
• /
• pp.310-315
• /
• 2011

BACKGROUND: Heavy-metal pollution represents an important environmental problem due to the toxic effects of metals, and their accumulation throughout the food chain leads to serious ecological and health problems. METHODS AND RESULTS: Optimum conditions in continuous-flow stirred tank reactor (CSTR) and packedbed column contactor (PBCC) using brown seaweed biosorbent were investigated. Under optimum conditions from both lab-scale biosorbent systems, removal efficiency of copper (Cu) in a large-scale PBCC system was investigated. Removal capacity of Cu using brown seaweed biosorbent in a lab-scale CSTR system was higher than that in a lab-scale PBCC system. On the other hand, over 48 L/day of flow rate in Cu solution, removal efficiency of Cu in a lab-scale PBCC system was higher than that in a lab-scale CSTR system. Optimum flow rate of Cu was 24 L/day, optimum Cu solution concentration was 100 mg/L. Removal capacity of Cu at different stages was higher in the order of double column biosorption system > single column biosorption system. Under different heavy metals, removal capacities of heavy metal were higher in the order of Pb > Cr > Ni > Mn ${\geq}$ Cu ${\geq}$ Cd ${\fallingdotseq}$ Zn ${\geq}$ Co. Removal capacity of Cu was 138 L in a large-scale PBCC system. Removal capacity of Cu a large-scale PBCC system was similar with in a lab-scale PBCC system. CONCLUSION(s): Therefore, PBCC system using brown seaweed biosorbent was suitable for treating heavy metal wastewater.

• Journal of Plant Biotechnology
• /
• v.29 no.3
• /
• pp.151-159
• /
• 2002

Genetic map and molecular marker have a great importance in improving and facilitating crop breeding program as well as in genome analysis and map-based cloning of genes representing desirable characters. This study aimed at developing RAPD markers and constructing a genetic linkage map using 82 BC$_1$F$_1$individuals originated from the cross between '835' and B$_2$in radish (Raphanus sativus L.). One of the parents for genetic linkage map construction, '835'(P$_1$) of egg type is susceptible to Fusarium wilt and have medium resistance to virus infection and the other parent, B$_2$(P$_2$) of round type, is susceptible to Fusarium wilt and virus, Screening of 394 RAPD primers in BC$_1$F$_1$) population resulted in selecting 128 polymorphic markers which displayed 1:1 segregation pattern. Two markers failed to display 1:1 segregation and showed the segregation ratio skewed to maternal genotype. Selected markers were categorized into 14 linkage group based on LOD score represented by MAPMAKER/EXP program. Five groups composed of single marker among them were excluded from the linkage map, and consequently, the remaining groups are well matched with the number of radish chromosome (n＝9). The linkage map constructed with 128 markers covers 1,688.3 cM and the average distance between markers was 13.8 cM. For developing STS marker, we determined the partial nucleotide sequence of OPE10 marker at both ends and designed a oligonucleotide primer pair based on this sequence. STS PCR using the primer pair displayed a single, clear band of which segregation is perfectly matched with that of OPE10 marker. This implies that RAPD markers could readily convert into clear and reliable STS markers.

• Journal of agricultural medicine and community health
• /
• v.43 no.4
• /
• pp.234-249
• /
• 2018

This study was performed to identify the impact of awareness and educational experiences on cardiopulmonary resuscitation in the ability to execute of cardiopulmonary resuscitation among Korean adults. This study used original data of 2014 Community Health Data Survey. 228,712 participants in this survey were resident in South Korea who is aged 19 or older on July 2014. Participants in this survey were sampled an average of 900 residents(target error ${\pm}3percent$) per community health center of Korea. Data were analyzed by using R 3.1.3 employing chi-squared test, fisher's exact analysis, and logistic regression analysis. Ability to execute CPR was significantly higher in males(3.34 time), higher the education level (1.61 times), the white color occupation (1.14 times), the higher the income level (1.07 times), the higher the education level (0.91 times), non-hypertensive patients (1.12 times), non-diabetic patients (1.16 times), non-dyslipidemic patients (0.86 times), non-stroke patients (0.30 times), CPR education experience group (3.25 times), CPR experience group with manikin-based training (4.30 times), higher subjective health status (1.08 times, 1.16 times) respectively. This study identified that awareness, educational experience, and mannequin-based learning experience of CPR impacted on the ability to execute CPR. Responding to education-related factors could contribute to reducing the rate of out-of-hospital acute cardiac arrest by improving the ability to execute CPR of the general public.

• The Korean Journal of Archival Studies
• /
• no.42
• /
• pp.135-183
• /
• 2014

Korea has a high standard of IT environment to serve exhibit programs through the web with internet propagation and IT technology. However, the web exhibition of public institutions not only seem to introduce off-line exhibitions but also not to invigorate. It is caused by the lack of awareness, the cost of system installation and the lack of professional manpower. In this situation, OMEKA could suggest practical solutions to archives where need their own exhibition through the web. Especially, it would helpful for small record management organizations which are not enough budget and personal. OMEKA is an open source software program for digital collection and contents management. It has an affinity with users unlike traditional archives service programs. It also has been variously used by libraries, museums and schools because of exceptional exhibit functions. In this article, we introduce to the installation of a practical use about OMEKA. Regarding to OMEKA features, we consider it to raise exhibit effects. OMEKA would reduce the cost related to plans of exhibitions because it could display various contents and programs which reflecting characteristics of institutions. In addition, the availability of installation and widespread technological environment would lessen burden of public institutions. Using OMEKA, they would improve service level of public institutions and, make users satisfy. Therefore, they can change the social recognition of public institutions. OMEKA can contribute to various exercises of public records. It is not just the stereotypical system but, serves exhibition and collections with the strategy which each public institution would like to display. After all, it not only to connect to users with producers but also to improve the public image of institutions positively. Then, OMEKA would bring the great result through this interaction between public institutions and users.

• Journal of Food Hygiene and Safety
• /
• v.38 no.3
• /
• pp.79-88
• /
• 2023

Trifludimoxazin is a triazinone herbicide that inhibits the synthesis of protoporphyrinogen oxidase (PPO). The lack of PPO damages the cell membranes, leading to plant cell death. An official analytical method for the safety management of trifludimoxazin is necessary because it is a newly registered herbicide in Korea. Therefore, this study aimed to develop a residual analysis method to detect trifludimoxazin in five representative agricultural products. The EN method was established as the final extraction method by comparing the recovery test and matrix effect with those of the QuEChERS method. Various sorbent agents were used to establish the clean-up method, and no differences were observed among them. MgSO₄ and PSA were selected as the final clean-up conditions. We used LC-MS/MS considering the selectivity and sensitivity of the target pesticide and analyzed the samples in the MRM mode. The recovery test results using the established analysis method and inter-laboratory validation showed a valid range of 73.5-100.7%, with a relative standard deviation and coefficient of variation less than 12.6% and 14.5%, respectively. Therefore, the presence of trifludimoxazin can be analyzed using a modified QuEChERS method, which is widely available in Korea to ensure the safety of residual insecticides.

• Journal of Food Hygiene and Safety
• /
• v.28 no.1
• /
• pp.75-82
• /
• 2013

The simultaneous analysis and monitoring of aflatoxin $B_1$, $G_1$, $B_2$, $G_2$ and ochratoxin A in foods were carried out by HPLC with fluorescence detection. The samples were extracted with methanol/water mixture. The extract was centrifuged, diluted with phosphate buffer saline (PBS), filtered, and applied to an immunoaffinity column containing antibodies specific to both aflatoxins and ochratoxin A. After washing the column with PBS and water, the toxins were eluted from the column with methanol, and quantified by HPLC, with a run time of approximately 30 min. The recoveries for aflatoxin $B_1$, $G_1$, $B_2$, $G_2$ and ochratoxin A in foods were 78.4~101.5%, 73.3~102.1%, 81.7~106.7%, 67.0~104.6% and 78.7~120.8%, respectively. The limits of detection of aflatoxins and ochratoxin A ranged from 0.05 to $0.18{\mu}g/kg$. According to monitoring result with the established method, aflatoxin $B_1$ and ochratoxin A were found in 13 of 151 domestic commercial foods. The contamination levels were $0.32{\sim}1.80{\mu}g/kg$ for aflatoxin $B_1$ and $0.97{\mu}g/kg$ for ochratoxin A. Therefore, this study showed all commercial foods monitored were safe under the Korean standards for aflatoxins and ochratoxin A.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.3
• /
• pp.236-256
• /
• 2011

Forest carbon stocks change due to land use change is an important data required by UNFCCC(United Nations framework convention on climate change). Spatially explicit estimation of forest carbon stocks based on IPCC GPG(intergovernmental panel on climate change good practice guidance) tier 3 gives high reliability. But a current estimation which was aggregated from NFI data doesn't have detail forest carbon stocks by polygon or cell. In order to improve an estimation remote sensing and GIS have been used especially in Europe and North America. We divided research trends in main countries into 4 categories such as remote sensing, GIS, geostatistics and environmental modeling considering spatial heterogeneity. The easiest way to apply is combination NFI data with forest type map based on GIS. Considering especially complicated forest structure of Korea, geostatistics is useful to estimate local variation of forest carbon. In addition, fine scale image is good for verification of forest carbon stocks and determination of CDM site. Related domestic researches are still on initial status and forest carbon stocks are mainly estimated using k-nearest neighbor(k-NN). In order to select suitable method for forest in Korea, an applicability of diverse spatial data and algorithm must be considered. Also the comparison between methods is required.