• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.1
• /
• pp.32-40
• /
• 2003

To characterize diel pattern of methane transport via rice plant, methane emission was measured on specific days in rice growing stages; tillering, meiotic, heading and harvest stages, from a paddy under different water management and organic amendments. Methane emission was monitored every two hours a day from chambers with and without rice plants. Proportion of the rice plant-mediated methane emission at different stage increased till the maximum growth of LAI and dry weight, and decreased thereafter. The proportion of methane emission through rice plants on June 18-19 at tillering stage was 38.4, 36.5 and 64.3 percent for NPK, Rice straw compost, RSC, and rice straw on February, RS2, respectively. The proportion on July 30-31 at meiotic stage was 70.4, 74.3 and 74.4 percent for NPK, RSC and RS2, respectively. The proportion on August 20-21 at heading stage was 80.1, 84.5 and 74.8 percent for NPK, RSC and RS2, respectively. The proportion on September 28-29 at harvest stage was 69.9, 65.9 and 64.4 percent for NPK, RSC and RS2, respectively.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.1
• /
• pp.43-52
• /
• 2006

Numerical model tests are done in order to evaluate impact zone of low salinity water on outer region of the developing Saemankeum reservoir. Also saline mixing processes are investigated f3r the inner reservoir with consideration of Mankyoung and Donjin riverine flood discharges when sea water is passing freely through gate. In these analyses 2-d ADCIRC, 3-d TIDED3D and CE-QUAL-ICM models are used. Through models tests, it is found that inner reservoir mixing process caused by inflow of outer sea water occurs gradually. It takes at least one month for complete mixing on Mankyoung part and 6 month on Dongjin part of the reservoir. When Sinsi or Garyeok gates are opened to control inner reservoir level, discharging velocities decrease exponentially from the gates, but show very strong currents of 0.5m/sec to the 10Km region apart. These results imply that hydrodynamic circulation and ecosystem of frontal region of the Saemankeum dike might be affected in amount by gate operations, since low saline inner waters are discharged periodically at ebb tide according to tidal level.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.711-717
• /
• 2017

The railway is a public transportation system that provides large-scale passenger transportation and service, whose reliability and safety is the top priority. The wiring of railway vehicles is classified into train control lines (train lines) and communication lines. The train lines are used for input / output signals related to vehicle driving and safety functions, and the communication lines are used for the input / output signals for passenger services such as broadcasting. In order to measure the reliability of railway vehicles, a train line is applied to the input / output interface of the control signals between the electric control devices in the vehicle, and there are many electromechanical devices such as relays and contactors for the control logic. In fact, since the vehicle control circuit is composed of several thousand contacts, it is difficult to check for errors such as contact failure, and it is impossible to check the real-time status, so a lot of manpower and time is required for regular maintenance. Therefore, we analyze the current state of the train line design of the electric equipment used for driving and services in domestic railway cars and propose three wiring reduction methods to improve it. Based on the analysis of domestic electric vehicles, it was confirmed that the wiring reduction effect is 35% or more.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.8
• /
• pp.2809-2817
• /
• 2010

The scholarly concern of train industry has been improved, since country focuses on this field. Especially, train maintenance facility has been studied for construction, because the facility is important to inspect the train that transports passenger and cargo. Various operation plans and criteria are considered to build train maintenance facility. In this paper, the decision making of train maintenance facility for construction is studied and analyzed with simulation, because mathematical theory is restricted to consider various operation plans and criteria. Through simulation, we analyze warm-up after selecting dependent factors, and extract data. The data is used to select a alternative in this problem, Multiple Attribute Decision Making(MADM). Previous study is difficult, complex and subjective for decision making. However, entropy measurement we used help decision maker for decision making, easily, simply, and objectively. This method can have decision maker choose the best alternative in case the train maintenance facility construction is fast revitalized.

• Journal of Advanced Navigation Technology
• /
• v.21 no.1
• /
• pp.1-12
• /
• 2017

As the current ground transportation system becomes saturated, there is a need to develop a roadable personal air vehicle (PAV). Therefore, researches for PAV development and operation system development are being actively carried out in various countries around the world. PAV, the next generation transportation system, is a new concept of personal transportation that combines ground transportation, air traffic, and IT industry. Also, the development of PAV can solve the saturation of traffic congestion and shorten the travel time dramatically. In this study, we analyzed the certification criteria of FAR Part 23, which is going to be revised, and analyzed the patents and folding mechanism of Terrafugia Transition and Aeromobil 3.0, which are the most advanced of roadable PAV. Also, we used $OpenVSP^{(R)}$ for the reverse configuration design of the existing Terafugia transition and Aeromobile 3.0. Aerodynamic analyses were performed for the reverse configuration design using the $XFR5^{(R)}$ program.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.3
• /
• pp.170-176
• /
• 2012

This paper analyzes the sea state and characteristics during the August 2011 passage of Typhoon Muifa based on data measured at four ocean weather/wave observation stations (buoys) located on the southwestern coast of Korea. When the typhoon arrived in the area approximately 230 km west of Mokpo at 9 PM on August 7, the decrease in air pressure led to increases in sea level of 25.64 cm at the Chilbal-do buoy, 16.43 cm at the Geomun-do buoy, and 9.60 cm at the Geoje-do buoy. The maximum wave height increased at the Geomun-do buoy about seven times faster than at the Chilbal-do buoy. The low water temperature at Chilbaldo during the typhoon passage probably reduced the wave energy. In the face of the oncoming typhoon, the southwest direction of the wind and waves may have been the result of external forces transporting seawater (energy) from the open sea toward the coast. The weather and ocean data from the Mara-do buoy were negatively correlated with those of Chilbal-do, whereas the data from Geomun-do had a positive correlation with those of Geoje-do.

• Journal of Korea Water Resources Association
• /
• v.51 no.8
• /
• pp.655-664
• /
• 2018

The riverbed material survey is to investigate the particle size distribution, specific gravity, porosity, etc. as basic data necessary for river channel plan such as calculation of sediment transport and change of river bed. In principle, the survey spots are 1 km interval in the longitudinal direction of the river and 3 points or more in the 1 cross section. Therefore, depending on longitudinal length of the river to be investigated, the number of surveyed sites is very large, and the time and cost for the investigation are correspondingly required. This study is to compare the particle size analysis method with the volumetric method and the image analysis method in work efficiency and cost and to examine the applicability of the image analysis method. It was confirmed that the diameter of the equivalent circle converted by the image analysis method can be applied to the analysis of bed material particle size. In the gravel stream with a particle size of less than 10 cm and a large shape factor, the analytical result of the bed material by the image analysis method is accurate. However, when the shape factor decreases as the particle size increases, the error increases. In addition, analysis results of the work efficiency and cost of the volume method and the image analysis method showed a reduction of about 80%.

• Journal of the Korean earth science society
• /
• v.28 no.1
• /
• pp.45-53
• /
• 2007

This study investigated the effect of parked cars in the sunshine on the increase of air temperature on a sunny day. Air temperatures were determined both from inside of the parked cars and the top surface of the vehicle at which one car was parked under the sunshine and the other in the shade for the duration of 27 hours. The surface temperatures of asphalt and bare soil were simultaneously measured in both locations, sunshine and shade areas, along with a couple of meteorological factors. The sensible heat fluxes from the surfaces of asphalt, bare soil and two vehicles were estimated by utilizing those observed data. The results are as follows; 1) The surface temperatures of bare soil, asphalt and two vehicles increased with $30{\sim}37^{\circ}C,\;37{\sim}46^{\circ}C\;and\;42{\sim}49^{\circ}C$ respectively during the day. 2) The sensible heat fluxes were noticeably higher from the top surface of the parked vehicle in the sunshine than from the asphalt or bare soil. The differences of sensible heat fluxes between the vehicle's roof and the other two surfaces of asphalt and bare soil were 60 (asphalt) and 85 (bare soil) $W/m^2$ during the daytime.

• Journal of the Economic Geographical Society of Korea
• /
• v.9 no.3
• /
• pp.379-395
• /
• 2006

The purpose of this study is to analyze the spatial characteristics of travel patterns and travel behaviors of transit users in the Metropolitan Seoul area. We apply the data mining techniques to explore the travel patterns of transit users from the T-money card database which has been produced over 10,000,000 transaction records per day. The database contains the information of locations and times of origin, transfer, and destination points for each transaction as well as the informations of transit modes taken via the transaction. We develop an data mining algorithm to explore traversal patterns from the enormous information. The algorithm determines the travel sequences of each passenger, and produce the volumes of support on each points (stops) of transportation networks in the Metropolitan Seoul area. In order to visualize the spatial patterns of travel demands for transit systems we apply GIS techniques, and attempt to investigate the spatial characteristics of travel patterns and travel demand. Subway stops located in the Gangnam area appear the highest peak for the travel origin and destination, while the CBD in the Gangbuk stands at the second position. Two or three sub-peaks appear at the densely populated residential areas developed as the high-rise apartment complex. Subway stations located along the Subway Line 2, especially from Guro to Samsung receive heavy travel demand (total support), while bus stops located at the CBD in the Gangbuk stands the highest travel demand by bus.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.189-193
• /
• 2003

금형가공에 있어서 밀링머신의 가공에서는 절삭가공의 잔유물인 버(Burr)가 생성되고, 이러한 버는 가공의 정밀도를 감소시킬 뿐만 아니라 후처리과정(Deburring)을 야기시킴으로 인해서 작업효율의 감소 및 생산성의 비효율적 낭비를 가져오게 된다. 따라서, 정밀도와 작업효율을 극대화하긴 위해서는 버의 생성원리를 파악하고, Exit Burr의 생성부분을 미리 예측하여 버의 생성을 최소화 할 수 잇는 작업 가공계획을 설계하여야 한다. (1)기존의 Burr Exit System에서는 피삭재의 단면형상인 Line과 Are처럼 단순한 형상뿐만 아니라, Line과 Are가 연결되어있는 복잡란 형상에 대해서도 버를 판별한다. 그리고, 가공 후 버가 생성되는 부분을 예측하고, 이때의 Exit Angle을 계산하여 이에 해당하는 기 실험결과 DataBase와 연동하여 생설될 버의 형상과 크기 등의 결과를 제공하여 준다. 더불어, 피삭재의 단면형상이 여러 가지 복합적인 형상으로 이루어져 있는 경우와 다양한 공구 경로까지 고려하여 실제가공과 거의 유사란 상황을 적용할 수 잇는 알고리즘으로 개발하였다. 본 논문에서는 이제까지 개발된 다양한 형상에 대한 Exit Burr 판별 알고리즘을 이용하여 임의형상을 가진 피삭재의 다중가공경로 상에서 발생 가능한 버를 예측하고, 버의 길이나 가공시간 들을 정?화 하여 최적화하는데 필요란 요소를 추출해 보고자 한다. 또한, 이를 인용하여 Face Windows에서의 버의 발생을 최소화 할 수 있는 최적 절삭가공 공구경로를 제시하여, 작업 효율성을 극대화하는 알고리즘을 Windows 응용 프로그램으로 구현하고자 한다.생성하기보다는 기존에 발생된 구매 지시의 우선적 사용과 기존 구매 지시의 납기 일자를 고객 납기에 가장 잘 맞출 수 있도록 변경하는 방안을 제시한다. 이렇게 함으로써 최대한 고객 납기를 만족하도록 계획을 수립할 수 있게 된다. 본 논문에서 제시하는 계획 모델을 사용함으로써 고객 주문에 대한 대응력을 높일 수 있고, 계획의 투명성으로 인한 전체 공급망의Bullwhip effect를 감소시킬 수 있는 장점이 있다. 동시에 이것은 향후 e-Business 시스템 구축을 위한 기본 인프라 역할을 수행할 수 있게 된다. 많았고 년도에 따른 변화는 보이지 않았다. 스키손상의 발생빈도는 초기에 비하여 점차 감소하는 경향을 보였으며, 손상의 특성도 부위별, 연령별로 다양한 변화를 나타내었다.해가능성을 가진 균이 상당수 검출되므로 원료의 수송, 김치의 제조 및 유통과정에서 병원균에 대한 오염방지에 유의하여야 할 것이다. 확인할 수 있었다. 이상의 결과에 의하면 고농도의 유기물이 함유된 음식물쓰레기는 Hybrid Anaerobic Reactor (HAR)를 이용하여 HRT 30일 정도에서 충분히 직접 혐기성처리가 가능하며, 이때 발생된 $CH_{4}$를 회수하여 이용하면 대체에너지원으로 활용 가치가 높은 것으로 판단된다./207), $99.2\%$(238/240), $98.5\%$(133/135) 및 $100\%$ (313)였다. 각각 두 개의 요골동맥과 우내흉동맥에서 부분협착이나 경쟁혈류가 관찰되었다. 결론: 동맥 도관만을 이용한 Off pump CABG를 시행하여 감염의 위험성을