• The Korean Journal of Mycology
• /
• v.4 no.1
• /
• pp.31-44
• /
• 1976

The studies were carried out to examine the effects of supplementation of nutritional substances and physical conditions in substrate on the mycelial growth and yield of fresh sporophores of winter mushroom, Flammulina velutipes(Curt. ex Fr.) Sing. and to obtain further informations on the nutritional requirements of the fungus with reference to improvement of substrate through [analysis of chemical composition of the substrates during the cultivation period. The results obtained are summarized as follows: 1. The best yield of fresh sporophores, 84.4 g per 280 g substrate in a bottle, was obtained from the mixture of poplar sawdust 10 and rice bran 3 by volume when Flammulina velutipes was cultivated on the poplar sawdust supplemented by rice bran, wheat bran, cattle manure and various combinations of these materials as nutrient sources. The substrates of poplar sawdust 10 plus rice bran 3 and 2 or wheat bran 3 with a higher yield of fresh sporophores showed a comparatively higher content of total nitrogen. total sugar, and potassium. 2. The mycelial growth of the fungus was compared on the substrates of poplar sawdust supplemented by the several nutrient sources and poplar sawdust alone. The fastest linear growth occurred on substrates of poplar sawdust alone and poplar sawdust plus cattle manure deficient in sugar and nitrogen sources, but mycelial density was more sparse on the substrates. Also, growth in a solution extracted from these substrates was very meager. 3. In the substrates which varied with bulk density and moisture content optimum bulk density and moisture content for mycelial growth was 0.2g/cc and 72% on a dry weight basis, respectively, but the highest yield of fresh sporophores was obtained at the bulk density of 0.3g/cc and moisture content of 67%. 4. By increasing the ratio of rice bran in poplar sawdust the loss of total weight and ash, content at each stage was increased, and during the cultivation period of 75 days, loss of total weight of the substrates at inoculation was 17.8 to 28.8% and ash content increased about 12%. 5. 11 to 14% of the cellulose and 3 to 4% of the lignin content per original substrate were decreased without a great difference depending of the mixing ratio of rice bran. The soluble glucose concentration in the substrates was increased during the same period. 6. In the process of vegetative and reproductive growth of the fungus upon the substrates, the total nitrogen was increased in quantity per dry weight of sample but was reduced in absolute quantity to a minute extent. There is no great changes in content of organic nitrogen including amino acid nitrogen, and hydrolysable ammonium nitrogen during the vegetative growth period, but occurrence of sporophores resulted in a decrease in the nitrogen content of these forms. On the one hand, by an increase of additive amounts of rice bran, nitrogen contents of these forms were higher and the reduction range during the reproductive growth period became wider. 7. Mycelial growth of the fungus was accelerated in various liquid media supplemented with organic nitrogen sources such as peptone and yeast extract in comparison with addition of inorganic nitrogen sources. Furthermore, mycelial growth was mere vigorous in the media with higher content of organic nitrogen sources.

• Horticultural Science & Technology
• /
• v.32 no.1
• /
• pp.53-59
• /
• 2014

This study aimed to determine an appropriate cooling timing in the root zone for lowering substrate temperature and its effect on physiological response of sweet pepper (Capsicum annum L. 'Orange glory') grown on coir substrate in summer, from the July 16 to October 15, 2012. Daily temperature of substrate, root activity, leaf water potential, first flowering date, and the number of fruits were measured by circulating cool water through a XL pipe in the root zone during either all day (all-day) or only night time (5 p.m. to 3 a.m.; night) from the July 23 to September 23, 2012. For comparison, no cooling (control) was also applied. Between the $23^{rd}$ of July and $31^{st}$ of August (hot temperature period), daily average temperatures in substrates were $25.6^{\circ}C$, $26.1^{\circ}C$, and $29.1^{\circ}C$ for the all-day and night treatment, and control respectively. About 1.8 to $5^{\circ}C$ lower substrate temperature was observed in both treatments compared to that of control. In sunny day ($600-700 W{\cdot}m^{-2}{\cdot}s^{-1}$), the highest temperature of substrate was measured between 4 p.m. and 5 p.m. under both the all-day and night treatments, whereas it was measured between 7 p.m. and 8 p.m. under the control. Substrate temperatures during the day (6 a.m. to 8 p.m.) and night (8 p.m. to 6 a.m.) differed depending on the treatments. During the day and night, averaged substrate temperature was lower about $3.3^{\circ}C$ and $4.0^{\circ}C$ for the all-day, and $2.1^{\circ}C$ and $3.4^{\circ}C$ for the night treatment, compared to that of control. In the all-day and night treatment, the TD [TD = temperature of (control)] was greater in bottom than that of other regions of the substrate. Between the day and night, no different TD values were observed under the all-day treatment, whereas under the night treatment there was difference with the greatest degree in the bottom of the substrate. During the hot temperature period, total numbers of days when substrate temperature was over $25^{\circ}C$ were 40, 23 and 27 days for the control, all-day, and night treatment, respectively, and the effect of lowering substrate temperature was therefore 42.5% and 32.5% for the all-day and night treatment, respectively, compared to that for the control. Root activity and leaf water potential of plants grown under the all-day treatment were significantly higher than those under the night treatment. The first flowering date in the all-day treatment was similar to that in the night treatment, but 4-5 day faster than in the control. Also, the number of fruits in both treatments was significantly higher than that in the control. However, there was no effect of root zone cooling on eliminating delay in fruiting caused by excessively higher air temperature (> $30^{\circ}C$), although the substrate temperature was reduced $18^{\circ}C$ to $5^{\circ}C$. These results suggest that the method of cooling root zone temperature need to be incorporated into the lowering growing temperature for growth and fruit set of health paprika.

• Korean Journal of Poultry Science
• /
• v.32 no.4
• /
• pp.291-300
• /
• 2005

Two experiments were carried out to assess the appropriate incubation conditions namely; duration, moisture content and the ideal microbial inoculant for fermented dried food waste(EW) offered to broilers. The nutrient utilization of birds fed the FW diets at varying dietary inclusion rates was also compared with a control diet. In Experiment 1, different moisture contents(MC) of 30, 40, 50 and $60\%$ respectively were predetermined to establish the ideal duration of incubation and the microbial inoculant. A 1mL Aspergillus oryzae(AO) $(1.33\times10^5\;CFU/mL)$ was used as the seed inoculant in FW. This results indicated that the ideal MC for incubation was $40\~50\%$ while the normal incubation time was > 72 hours. Consequently, AO seeds at 0.25, 0.50, 0.75 and 1.00mL were inoculated in FW to determine its effect on AO count. The comparative AO count of FW incubated for 12 and 96 hours, respectively showed no significant differences among varying inoculant dosage rates. The FW inoculated with lower AO seeds at 0.10, 0.05 and 0.01mL were likewise incubated for 72 and 96 hours, respectively and no changes in AO count was detected(p<0.05). The above findings indicated that the incubation requirements for FW should be $%40\~50\%$ for 72 hours with an AO seed incoulant dosage rate of 0.10mL. Consequently, in Experiment II, after determining the appropriate processing condition for the FW, 20 five-week old male Hubbard strain were used in a digestibility experiment. The birds were divided into 4 groups with 5 pens(1 bird per pen). The dietary treatments were; Treatment 1 : Control(Basal diet), Treatment 2 : $60\%$ Basal+4$40\%$ FW, Treatment 3 : $60\%$ $Basal+20\%\;FW+20\%$ AFW(Aspergillus oryzae inoculate dried food-waste diet) and Treatment 4: $60\%$ Basal+$40\%$ Am. Digestibility of treatment 2 was lowed on common nutrients and amino acids compared with control(p<0.05) and on crude fat and phosphorus compared with AFW treatments(T3, T4)(plt;0.05). Digestibility of treatment 3 and 4 increased on crude fiber and crude ash compared treatment 2 (p<0.05). Digestibility of control was high on agrinine, leucine, and phenylalnine of essential amino acids compared with treatment 3 and 4(p<0.05), and diestibility of treatment 3 and 4 was improved on arginine, lysine, and threonine of essential amino acids. Finally, despite comparable nutrient utilization among treatments, birds fed the dietary treatment containing AO tended to superior nutrient digestion to those fed the $60\%$ Basa1+$40\%$ FW.

• Korean Journal of Agricultural Science
• /
• v.15 no.1
• /
• pp.47-68
• /
• 1988

This study was conducted to define the optimal conditions for embryo growth during seed stratification and for breaking dormancy as well as seed germination of stratified ginseng seeds. The experiments were also carried out to detect some materials which were expected to induce seed dormancy in the ginseng seeds. The results summarized as follows; 1. The growth of embryo during seed stratification was significantly inhibited by the existence of endocarp. The fastest embryo growth was resulted at $15^{\circ}C$ and an estimated optimal temperature for embryo growth was about $18^{\circ}C$. 2. There was no significant difference between the embryo growth and germination ratio of ginseng seeds which were sown in seed bed at Aug-5 without seed stratification and that of artificial seed stratification. 3. Embryo growth and germination ratio was significantly inhibited by high temperature treatment at $30^{\circ}C$ for 24 hours or respiration stress by immersing seeds in water for 10 days or more. 4. When the seed stratification was started at $10^{\circ}C$, growth of embryo in the ginseng seeds were almost stopped. But, when the seeds were stratified first at $20^{\circ}C$ for 50 days and next at $10^{\circ}C$ for 50 days, the embryo growth was significantly promoted compared with the embryo growth in the seeds which were stratified at $20^{\circ}C$ for 100 days. 5. The successive embryo growth after seed stratification was significantly accelerated at $10^{\circ}C$ but the seeds chilled at $5^{\circ}C$ for 100 days were resulted in the highest germination ratio as well as the shortest days for germination. 6. The successive embryo growth during chilling treatment and seed germination were significantly inhibited by immersing seeds in water just before chilling treatment or during chilling treatment and by interruption of chilling treatment with raising temperature to $20^{\circ}C$ for 20 days during chilling treatment. 7. The germination ratio of ginseng seeds which finished chilling treatment was highest at $10^{\circ}C$ and 62.5% was the estimated soil moisture for the best germination of ginseng seeds. The ginseng seeds were found to require high amount of oxygen for germination. 8. Only water soluble material in homogenized ginseng seeds showed a significant inhibiting effect on the seed germination of sesame, millet and soybean. Water soluble material dissolved from undehisced ginseng seeds showed stronger inhibiting effect on the seedling growth of sesame than material from dehisced ginseng seeds. Extraction temperature did not influence the inhibiting effect of the material dissolved from ginseng seeds on the seedling growth of sesame. 9. Water soluble materials dissolved from the berry pulps, leaves, fresh roots and dried roots also showed a significant inhibiting effect on the seedling growth of sesame. 10. Water soluble materials dissolved from the ginseng seeds, leaves and fresh roots showed a significant inhibiting effect on the germination of true fungi and the growth of spawn but the growth of phytopathogenic bacteria was not. 11. Among the water soluble materials dissolved from ginseng seeds, the materials of low molecular weight less than 3,000 were resulted a significant inhibiting effect on the seedling growth of sesame and the materials of high molecular weight also showed an inhibiting effect.

• Food Science and Preservation
• /
• v.20 no.6
• /
• pp.751-759
• /
• 2013

There is increasing interest in freshly cut products, that is, foods produced without washing and cutting. In this study, the quality of freshly cut sliced Deodeok was compared with that of what based on its washing methods. In bubble washing, the Deodeok rises to the water surface apace and is broken into centimeter sizes. Microbubble washing calls for the production of a great number of 0.1 mm-sized bubbles in anions-bearing water and their passing through a trumpet-shaped hole at a high pressure. To compare the product deterioration rates of the specimens, they were stored at $10^{\circ}C$ for 10 days. In the specimens washed with the control method and with hand washing, the deterioration rate was 80%; and in the specimens washed with bubble and microbubble washing, 20~30%. The L-value (an index of browning) was higher in the bubble and microbubble washing than in the control and the hand washing, which implies that browning was minimized during the storage. As for the viable cell and coliform group counts that were measured during the storage, the specimens washed with the control method showed the highest values. In contrast, the specimens washed with microbubble washing showed the lowest values. In the sensory test, the specimens washed with microbubble were highest in storage preference. In conclusion, the Deodeok that was stored after it was washed with microbubble washing was found to have had the best quality.

• Food Science and Preservation
• /
• v.21 no.6
• /
• pp.815-823
• /
• 2014

This study was carried out to investigate the quality characteristics of muffins with added Pholiota adiposa powder. Muffins were prepared with different amounts of Pholiota adiposa powder (in 0, 2.5, 5, 10, and 15% ratios to the flour quantity). For analyzing the quality characteristics during the manufacturing of muffins, the pH, moisture content, dough density, height, specific volume, baking loss, texture, color, antioxidant activity, total polyphenol content, and sensory test results were determined. As the Pholiota adiposa powder content increased, the moisture content of the muffins decreased from 26.72 to 22.56%. The hardness of the muffins was increased with increasing Pholiota adiposa powder content, with the muffins with 15% Pholiota adiposa powder the hardest among all the samples. The inner color of the muffins, particularly the L and b values, decreased with increasing powder content compared to those of the control, but the a value increased. As the Pholiota adiposa powder content increased, the antioxidant activity and total polyphenol content of the muffins also increased. In the sensory evaluation, the muffins with 5% Pholiota adiposa powder showed higher values than the control and the other samples in all aspects, showing that 5% Pholiota adiposa powder could be incorporated into muffins to meet the taste and functional needs of the consumers.

• Journal of Animal Environmental Science
• /
• v.11 no.3
• /
• pp.161-168
• /
• 2005

The disinfectants are important to prevention of infectious diseases for livestock and have been used widespreadly in recent years. This study was conducted to determine the effect of the disinfectants on microorganisms with reference to disinfectants concentration and application period in piggery slurry. As material, chemically different four disinfectants were used and no disinfectant, as control. These four disinfectants were Acids, Basic, Aldehydes and Alkalis, respectively. The characteristics pH, moisture content and organic matter of the piggery slurry used in this study were 8.2, $98.6\%,\;0.4\%$, respectively. The initial total microorganisms of piggery slurry were $6.3\times10^5$ cfu/ml, and Escherichia coli, Staphylococcus aureus, Bacillus cereus were $1.2\times10^4,\;4.1\times10^4,\;1.7\times10^4 cfu/ml,$ respectively. The disinfectants were applied at $100\%,\;200\%\;and\;300\%$ concentrations on the piggery slurry surface. It was determined that the effect of disinfectants varied accordance to concentration and application time. The most sensitive microorganisms were Escherichia coli and Staphylococcus aureus, while Bacillus cereus was found to be durable. As a result of this study, the microorganinsms of the piggery slurry are on the decrease by all disinfectants during 2 weeks, but showed a tendency to increase in number after that time. Accordingly, the microorganisms which are concerned in the liquid composting of piggery slurry were not affected by the disinfectant after 2 weeks.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.5
• /
• pp.613-621
• /
• 2006

This study was performed to evaluate the storage quality of milk bread added with $\beta$-glucan (10 20 and 30%), which is a functional food material produced from Agrobacterium spp. R259 KCTC 10197BP. During storage ($20^{\circ}C$, 40% relative humidity) the pH of all breads gradually increased, although there were no significant differences in pH of the $\beta$-glucan added milk bread from those of the control. During storage, the moisture content of all groups decreased, however, moisture contents in the $\beta$-glucan added breads were higher than that in the control. Hunter color values ($L^*,\;a^*\;and\;b^*\;value$) of the milk bread added upto 20% $\beta$-glucan were not significantly different, but the lightness increased during storage. Rapid increase of hardness in the milk bread during storage was observed in control, while the hardness of $\beta$-glucan added bread increased slowly. Also, the degree of retrogradation of bread decreased as $\beta$-glucan addition amount increased. Sensory evaluation showed that the score of over-all acceptability of the bread added with 20% $\beta$-glucan was the highest among treated groups until four days of storage. This study confirmed that the addition of $\beta$-glucan to milk bread maintained the moisture content and delayed hardness during storage.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.11
• /
• pp.1597-1603
• /
• 2011

The influence of heat-moisture treatment (HMT) and substitution of rice flour containing different amylose contents on the quality characteristics of rice noodles was investigated. HMT was applied to rice flours with 21% moisture content at 100 and 105$^{\circ}C$ for 30 min. Three rice cultivars were used, including high amylose of Goami (GM) and intermediate amylose of Choochung (CC) as domestic rice flours and imported rice of Taeguk (TG) as a control. HMT and substitution of rice flour with different amylose contents affected the cooking and texture quality of rice noodles. When rice noodles were made of intermediate amylose rice flour with HMT, cooking properties improved with decreased cooking loss and cooking water turbidity and thus were closer to those of control. Especially, the hardness, adhesiveness, tensile strength, and darkness of rice noodles notably increased when HMT rice flour was used. Based on the results of quantitative descriptive analysis for selected rice noodles, the noodles made of HMT CC at 105$^{\circ}C$ (CC105) had high scores for resilience and adhesiveness and low scores for hardness compared with imported commercial rice noodles and other experimental noodles such as TG, HMT GM100, TG+CC, and TG+CC105. In conclusion, rice noodles were made of composite flours containing high amylose and intermediate amylose contents or HMT intermediate amylose content rice flour.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.12
• /
• pp.1769-1775
• /
• 2016

Aerial parts (leaves and stems) of radish are usually discarded due to the distinct undesirable flavors associated with inappropriate preparations, despite their many health benefits. In this study, we examined the role of extrusion process in the removal of off-flavors and elevation of antioxidant activity in radish (Raphanus sativus L.) leaves and stems. To optimize the extrusion conditions, we changed the barrel temperature (110, 120, and $130^{\circ}C$), screw speed (150, 200, 250, and 300 rpm), and moisture content (20, 25, and 30%). The polyphenol and flavonoid contents significantly increased in extruded radish leaves and stems (ER) under optimum extrusion conditions ($130^{\circ}C$, 250 rpm, and 20%). Under extrusion conditions, we compared off-flavors (as amount of sulfur-containing compound) levels between ER and non-extruded radish leaves and stems (NER) by an electronic nose. A total of six peaks (sulfur-containing compound) were similarly detected in both ER and NER, whereas the ER showed reduced off-flavors. Levels of glucosinolate (${\mu}g/g$), which can be hydrolyzed into off-flavors during mastication or processing, were significantly decreased in the ER. From these results, extrusion processing can be an effective method to increase anti-oxidant activity and removal of off-flavors in radish leaves and stems.