• Korean journal of applied entomology
• /
• v.43 no.1
• /
• pp.7-14
• /
• 2004

This study was carried out to survey and confirm the occurring sites of Parnassius bremeri in Korea, and to investigate ecological characteristics to develop a mass rearing technique. In the field survey, adults were found in the two previously known sites in Gyungnam Province and another site was newly found in Samcheok, Gangwon Province. Emergence period of adults was from middle of May to middle of June. Oviposition took place on various material, including hostplant, debris, dead leaves, etc. Eggs were laid singly, up to 126.7 eggs per female. The egg-period was 221.3${\pm}$2.3 days, eggs were hatched from 11th to 22nd of January in the natural condition, and started to feed for about 10 days after hatching. Survival rate of the 1st larvae was 67.6%. Developing period of each instar in the insectary (25$^{\circ}C$, 75% RH, 16L:8D) was 11.2 days for the 1st instar, 7.3 days for 2nd, 12.8 days for 3rd, 16.2 days for 4th, and 18.2 days for 5th, and the pupal period was 21.3 days. The average longevity of adults was 26.2 days. Oviposition rate was higher in the natural condition with enough space to fly for 3♀ : 1 ♂ coupled, at least 3 ${\times}$ 3${\times}$4 m-sized room, than in smaller cage. In a comparison of the preference for visiting on sugar source, black sugar and fructose were effective.

• Journal of the Korean Society for Railway
• /
• v.19 no.2
• /
• pp.195-203
• /
• 2016

Concrete slab track was applied to the Gyeoungbu High Speed Railroad step 2 and the Honam High Speed Railroad. Concrete slab track incurs higher construction cost and lower maintenance cost than existing gravel track. For these reasons, the use of concrete slab track has increased in Korea. The biggest problem in the use of concrete slab track is repairing damage from settlement that can occur while trains are in service. High speed railroad design standards require allowable residual settlement of concrete slab track of less than 25mm. In order to satisfy the requirement of long term stability of concrete slab track, it is necessary to manage the secondary compression settlement within the allowable residual settlement. This study is to evaluate the secondary compression settlement with the variation of the secondary compression index, thickness of soft ground, and concrete slab track life. Statistical analysis is performed to determine the probability of distribution of areas where serious problems will be caused after the concrete slab track is constructed.

• Journal of Korean Society of Forest Science
• /
• v.101 no.1
• /
• pp.62-68
• /
• 2012

We have investigated needle life span, photosynthetic pigment and nitrogen allocation pattern in the needle of Picea jezoensis in the three populations (Gyebangsan, Deogyusan and Jirisan) to find out growth environmental condition which needs the strategy development of conservation and restoration against population decline. Needle survival rate was the highest in Gyebangsan (87.0%) and the lowest in Jirisan (71.6%), and it decreased with the increase of needle age. Needle chlorophyll a and b in Deogyusan and Jirisan showed higher content in older needle, but chlorophyll content in Gyebangsan was the highest in 2-year-old needle. Carotenoid content was the highest in the needle in Gyebangsan, and it increased along with needle age. Chlorophyll a/b ratio showed the highest value in Jirisan and the lowest value in Gyebangsan. Chlorophyll/carotenoid ratio decreased with needle age, Needle nitrogen content was the highest in Deogyusan (1.51%) and the lowest in Gyebangsan (1.40%), and the older needle had the lower content. In contrast, the highest chlorophyll/nitrogen ratio represented the oldest needle.

• Journal of KIISE:Information Networking
• /
• v.36 no.5
• /
• pp.413-424
• /
• 2009

Wireless sensor network is based on an event driven system. Sensor nodes collect the events in surrounding environment and the sensing data are relayed into a sink node. In particular, when events are detected, the data sensing periods are likely to be shorter to get the more correct information. However, this operation causes the traffic congestion on the sensor nodes located in a routing path. Since the traffic congestion generates the data queue overflows in sensor nodes, the important information about events could be missed. In addition, since the battery energy of sensor nodes exhausts quickly for treating the traffic congestion, the entire lifetime of wireless sensor networks would be abbreviated. In this paper, a new congestion control method is proposed on the basis of genetic algorithm. To apply genetic algorithm, the data traffic rate of each sensor node is utilized as a chromosome structure. The fitness function of genetic algorithm is designed from both the average and the standard deviation of the traffic rates of sensor nodes. Based on dominant gene sets, the proposed method selects the optimal data forwarding sensor nodes for relieving the traffic congestion. In experiments, when compared with other methods to handle the traffic congestion, the proposed method shows the efficient data transmissions due to much less queue overflows and supports the fair data transmission between all sensor nodes as possible. This result not only enhances the reliability of data transmission but also distributes the energy consumptions across the network. It contributes directly to the extension of total lifetime of wireless sensor networks.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.3
• /
• pp.81-88
• /
• 2019

In this study, the effects of graphene oxide (GO) addition on electromigration (EM) lifetime of Sn-3.0Ag-0.5Cu Pb-free solder joint between a ball grid array (BGA) package and printed circuit board (PCB) were investigated. After as-bonded, $(Cu,Ni)_6Sn_5$ intermetallic compound (IMC) was formed at the interface of package side finished with electroplated Ni/Au, while $Cu_6Sn_5$ IMC was formed at the interface of OSP-treated PCB side. Mean time to failure of solder joint without GO solder joint under $130^{\circ}C$ with a current density of $1.0{\times}10^3A/cm^2$ was 189.9 hrs and that with GO was 367.1 hrs. EM open failure was occurred at the interface of PCB side with smaller pad diameter than that of package side due to Cu consumption by electrons flow. Meanwhile, we observed that the added GO was distributed at the interface between $Cu_6Sn_5$ IMC and solder. Therefore, we assumed that EM reliability of solder joint with GO was superior to that of without GO by suppressing the Cu diffusion at current crowding regions.

• Journal of the Korean Society of Radiology
• /
• v.13 no.3
• /
• pp.445-451
• /
• 2019

The fluorescence intensity and fluorescence lifetime of $Ba_2GdV_3O_{11}$, a vanadate compound based on $Ba^{2+}$ ion, were investigated by adding $Eu^{3+}$ as a rare earth ion which is an alkaline earth metal, which is distributed around active ions and has a large influence on fluorescent properties when used as a host in a phosphor. $Ba_2GdV_3O_{11}:Eu^{3+}$ phosphor was synthesized by solid state method and the crystallinity of the phosphor was confirmed by X - ray diffraction analysis. The fluorescence properties of the $Ba_2GdV_3O_{11}:Eu^{3+}$ phosphor were measured using optical and laser. The energy transfer and diffusion of the $Ba_2GdV_3O_{11}:Eu^{3+}$ phosphor are highly dependent on the concentration of $Eu^{3+}$. When the concentration of $Eu^{3+}$ is low, it shows strong fluorescence to the CT band. However, as the concentration of $Eu^{3+}$ increases, the fluorescence due to 4f - 4f transition is strong. The concentration of $Eu^{3+}$ ion increased and the energy between ions was diffused, and the lifetime of fluorescence decreased. Energy transfer occurs between two $Eu^{3+}$ ions at low $Eu^{3+}$ concentration and energy diffusion occurs at high $Eu^{3+}$ concentration.

• Korean Journal of Materials Research
• /
• v.3 no.6
• /
• pp.624-631
• /
• 1993

The composites in the system aluminium titanate-mullite were synthesized by stepwise alkoxide hydrolysis of tetraethylorthosilicate, Si(OCLH5), and titaniumtetraethoxide, $Ti(OC_{2}H_{5})_4$ in $Al_{2}O_{3}$ ethanolic colloidal solution. All particles produced by sol-gel-process were amorphous, monodispesed and had a narrow particle size distribution. Sintered bodies at $1600 ^{\circ}C$ for 2h were subjected to prolonged durability tests-on the one hand annealing at the critical decomposition temperature of $1100 ^{\circ}C$ for lOOh and on the other cyclic thermal shock between 750 and $1400 ^{\circ}C$ for 100h. The best thermal durability was achieved by a composition containing 70 and 80 vol% aluminium titanate, which showed little change in microstructure and thermal expansion cycles during the tests. The microstructural degradation of samples studied using scanning electron microscopy, X-ray diffraction, and dilatometry, was presented here. The study was conducted in order to predict the service life of aluminium titanate-mullite ceramics formed by this processing route.

• Journal of Energy Engineering
• /
• v.20 no.1
• /
• pp.1-7
• /
• 2011

The performance and life-cycle costs of electric vehicle(EV) and hybrid electric vehicle(HEV) depend inherently on battery packs. Temperature uniformity in a pack is an important factor for obtaining optimum performance for an EV or HEV battery pack, because uneven temperature distribution in a pack leads to electrically unbalanced battery cells and reduced pack performance. In this work, a three-dimensional modeling was carried out to investigate the effects of operating conditions on the thermal behavior of a lithium-ion battery pack for an EV or HEV application. Thermal conductivities of various compartments of the battery were estimated based on the equivalent network of parallel/series thermal resistances of battery components. Heat generation rate in a cell was calculated using the modeling results of the potential and current density distributions of a battery cell.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.155-155
• /
• 2016

최근 증가하고 있는 플렉서블 기기제작을 위한 플렉서블 전극으로 금속메쉬, 그래핀, 은나노선을 사용한 전극이 제안되었으나 복잡한 공정 및 안정성 문제로 인해 다양한 나노복합구조를 적용하여 단점을 개선하기 위한 연구가 진행되고 있다. 은나노선 전극은 특히 공정이 단순하고 투과도 및 전도도가 비교적 우수하며 기판의 휘어짐에도 특성변화가 가장 작아 플렉서블 전극의 가장 강력한 후보재료로 알려져 있다. 그러나 은나노선 전극은 구조적으로 전극표면에 고르게 분포하지 못하기 때문에 전극의 표면거칠기가 매우 커지고 투과되는 빛과 간섭하여 헤이즈가 발생되는 문제를 가지고 있다. 특히 플렉서블 OLED용 전극으로 응용시 화면의 선명도가 떨어지며 은나노선 네트워크의 접촉저항이 증가하고 큰 표면거칠기로 인해 수명이 감소하는 문제를 가지고 있다. 이러한 문제를 해결하기 위해 본 연구에서는 은나노선 전극에 산화그래핀 처리를 통해 나노복합구조를 형성하고 플렉서블 기판에 전사하는 방법을 통해 투명 전극을 형성하였다. 주사전자현미경 측정을 통해 산화그래핀 플레이크와 은나노선 전극의 구조적 특성을 조사하였고 면저항측정을 통해 산화그래핀 처리공정 조건에 따라 전기적 특성이 개선되는 결과를 확인하였다. 은나노선 전극의 전도도 개선의 원인을 조사하기 위해 라만, XPS, 투과도 측정결과를 분석하였다. XPS 분석결과 은나노선과 그래핀의 나노복합구조 형성을 통해 산화그래핀에 포함된 pyridinic 질소가 감소하고 quaternary 질소가 증가하였다. 이는 산화그래핀의 내부 defect sites에 질소결합이 증가되었음을 의미하고 이로인해 산화그래핀에 부분적인 전도경로가 형성되어 은나노선의 전도특성을 개선되었다. 투과도 측정을 통해 은나노선의 가로방향 플라즈몬 공명 흡수가 산화그래핀 처리에 의해 감소하였고 이로 인해 은나노선 전극의 투과도가 산화그래핀 처리에 의해 개선되는 결과를 확인하였다. 은나노선 전극에 대해 산화그래핀 처리를 통해 나노복합구조 형성에 대한 연구는 은나노선 플렉서블 전극 개발을 가속화하고 잠재적인 응용분야를 확대하기 위한 원천지식을 제공할 것이다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.18 no.4
• /
• pp.49-61
• /
• 1981

A generally applicable computer simulation program for diffused silicon solar cells has been developed on the basis of the experimental results. The program can be easily used to obtain the spectral response and I-V characteristics for N+P, P+N N+PP+, P+NN+cells by changing various input parameters. The insolated spectra can be taken from AMI and constant intensity and GE - ELH lamp light sources. The options for AR coating are Si3N4 film and materials with constant reflectance including zero reflectance for ideal case. The computer simulation demonstrates successful results compared with the measured values for the short circuit current, open circuit voltage, efficiency, spectral response, quantum efficiency, I-V characteristics, etc. This program was used to optimize doping concentration, cell thickness, light concentration, junction depth, and to obtain the limit values for front surface recornbination velocity, effective carrier life time in the depletion regions and shunt resistance, and also to drive the changing rate in conversion efficiency depending on operation temperature, series resistance and electric field strength in N+P+ bulk regions.