• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.509-513
• /
• 2004

현장 균열망의 연결성 및 이에 따른 수리지질학적 특성을 규명하기 위하여, 기존의 통상적인 조사 기법을 한 지역에 집적하여 그 결과에 대한 통합해석을 수행하였다. 본 연구에 적용된 조사 방법은 양수시험, 물리검층, 다중심도 수리화학 분석, 전기비저항 토모그래피, 시추 코어 검층 등의 기련 특성 조사와, 추적자 시험, 다중 심도 수직 유향유속 시험 등 구간별 특성 조사 등이다. 이러한 조사 결과 본 조사 지역 내 균열의 전반적인 분포 특성을 확인할 수 있었으며, 각 균열의 수리적 특성에 대한 기본적 특성을 확인할 수 있었다. 특히 추적자 시험과 유향유속 시험 결과를 통해 각 관정간의 균열을 통한 연결성에 대한 중요한 정보를 도출할 수 있었다. 이러한 성과는 추후 percolation, connectivity 등 모델 개념의 현장화를 위한 연구의 선행 연구로서 그 의미를 자리매김 할 수 있을 것이다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.2084-2088
• /
• 2007

상수관망의 수리해석기법은 demand-driven analysis(DDA)와 pressure-driven analysis(PDA)로 구분할 수 있다. 관거 파괴나 용수수요 급증과 같이 용수공급시스템이 비정상상태인 경우 절점의 용수수요는 항상 만족한다는 가정을 사용하는 DDA의 경우 비현실적인 결과를 줄 수 있으며, 절점수요와 절점수두를 동시에 고려하는 PDA의 개념을 이용한 관망의 수리해석이 필요하다. PDA의 개념을 사용하여 개발된 기존의 많은 모형들은 복잡한 실제관망에는 적용이 불가능한 문제점들을 가지고 있으며, 본 연구에서는 화음탐색법(Harmony Search, HS) EPANET의 toolkit을 연계하여 개발된 HSPDA모형의 실제 대규모 상수관망에의 적용성을 검토하였다. 실제 대규모관망에의 적용성 향상을 위해 화음탐색법의 새로운 인자인 PIR를 제안하였으며 적용결과 새롭게 제안된 PIR은 HSPDA모형의 최적해탐색효율을 획기적으로 향상시켰으며, HSPDA모형을 이용한 실제 대규모관망의 비정상상태 수리모의가 가능한 것으로 판단된다.

• Economic and Environmental Geology
• /
• v.45 no.6
• /
• pp.697-707
• /
• 2012

The quantitative landslide susceptibility assessment methods can be divided into statistical approaches and geomechanical approaches based on the consideration of the triggering factors and landslide models. The geomechanical approach is considered as one of the most effective approaches since this approach proposes physical slope model and considers geomorphological and geomechanical properties of slope materials. Therefore, the geomechanical approaches has been used widely in landslide susceptibility analysis using the infinite slope model as physical slope model. However, the previous studies assumed constant groundwater level for broad study area without the consideration of rainfall intensity and hydraulic properties of soil materials. Therefore, in this study, landslide susceptibility assessment was implemented using the coupled infinite slope model with hydrologic model. For the analysis, geomechanical and hydrualic properties of slope materials and rainfall intensity were measured from the soil samples which were obtained from field investigation. For the practical application, the proposed approach was applied to Jinbu area, Gangwon-Do which was experienced large amount of landslides in July 2006. In order to compare to the proposed approach, the previous approach was used to analyze the landslide susceptibility using randomly selected groundwater level. Comparison of the results shows that the accuracy of the proposed method was improved with the consideration of the hydrologic model.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1837-1840
• /
• 2009

최근 자연형하천 조성사업과 하천복원 등을 목적으로 하천의 치수, 이수적인 기능뿐만 아니라 생태적인 기능을 고려한 하천설계를 위하여 많은 노력들을 하고 있다. 이와 같은 목적으로 하천의 생태적 통로가 단절되는 것을 막기 위해 하천 횡단 구조물인 보와 낙차공에 어도를 설치하고 있다. 하지만 현재 어도 설계는 어도 내의 흐름특성을 정확히 고려하지 못하고 설계되어 어도 본래의 기능을 수행하지 못하는 경우가 많았다. 그 이유는 현장 상황에 따라 어도의 종류와 형태가 다양하게 설계되고 있는 것에 반해 이를 검토할 수 있는 방법이 수리실험으로 한정되어 있어서 어도내 흐름특성을 결정하기 어렵기 때문이다. 어도 설계를 위한 수리실험은 시간적, 공간적 및 경제적인 제약으로 인해 다양한 형태의 어도 조건과 수리조건을 검토하기에는 현실적으로 어려움이 있는 반면에 수치모의는 매개변수 결정에 어려움이 있지만 수리실험에 비해 다양한 형태와 수리조건에 대해 간편하게 흐름특성을 예측할 수 있는 장점이 있다. 따라서 본 연구에서는 어도 설계시 간편하게 어도내 흐름특성을 예측할 수 있도록 기존에 사용되고 있는 수리실험 결과와 수치모의 기법을 이용한 흐름해석 결과를 비교하여 보았다. 수치모의는 3차원 흐름모형인 FLOW-3D를 이용하였고, 어도 형태는 도류벽식 어도를 대상으로 수행하였다. 수행 결과 수리실험과 비교하여 수심별로 최대 13% 정도의 오차를 보이고 있으며, 최대유속 발생 지점을 비교한 결과 하폭의 6% 정도 오차를 보였다. 따라서 최종 설계 이전에 어도의 흐름특성을 예측하기 위한 방법으로 FLOW-3D를 사용한다면 충분히 활용 가능할 것으로 판단된다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.5 no.2
• /
• pp.99-106
• /
• 1993

A two-dimensional numerical analysis is performed for the simulation of intertidal-flat and analysis of hydraulic characteristics during seadike construction in Sae-Man-Keum tidal basin. The shallow water equations are selected as a mathematical model and the Leendertse's ADI scheme is used as the corresponding numerical model. The simulated results of tide and current by the present model agree welt with the experimenta1 results by the hydraulic Lab. or ADC (1989). In the application of the model, the possibility of rapidly varied flow analysis and the introduction of turbulence model required for more accurate hydraulic calculation at closing gap are described. The successive simulation of flooding/drying effects by a modification of the method by Stelling et al. (1986) can easily be used for the intertidal-flat analysis during tidal reclamation.

• Tunnel and Underground Space
• /
• v.25 no.6
• /
• pp.556-567
• /
• 2015

The evaluation of THM coupling behavior in deep underground repository condition is essential for the long term safety and stability assessment of high-level radioactive waste repository. In order to develop reliable THM analysis techniques effectively, an international cooperation project, DECOVALEX, is carried out. In DECOVALEX-2015 Task B2, the in situ THM experiment planned to be conducted by JAEA was modeled by the research teams from the participating countries. In this study, a THM coupling technique combining TOUGH2 and FLAC was developed and applied to 1 dimensional THM modeling, in which rock, buffer, and heater are considered. The results were compared with those from other research teams.

• Tunnel and Underground Space
• /
• v.29 no.5
• /
• pp.318-331
• /
• 2019

A three-dimensional(3D) equivalent continuum modeling was performed to analyze hydraulic behavior of rock mass considering discontinuities by using DFN model and smeared fracture model. DFN model was generated by FLAC3D and smeared fracture model was applied by using FISH functions, which is built-in functions in FLAC3D, for equivalent continuum model of fractured rock mass. Comparative analysis with 3DEC, which is for discontinuum analysis, was conducted to verify reliability of equivalent continuum analysis by using FLAC3D. Similar results of hydraulic analysis under the same conditions could be achieved. Equivalent continuum analysis of fractured rock mass by using DFN model was implemented to compare with existing analytical methods for inflow into the tunnel.

• Tunnel and Underground Space
• /
• v.26 no.3
• /
• pp.166-180
• /
• 2016

The present study numerically simulated the CO2 injection into the saline aquifer of CO2CRC Otway pilot project and the resulting hydrological-mechanical coupled process in the storage site by TOUGH-FLAC simulator. A three-dimensional numerical model was generated using the stochastic geological model which was established based on well log and core data. It was estimated that the CO2 injection of 30,000t over a period of 200 days increased the pressure near the injection point by 0.5 MPa at the most. The pressure increased rapidly and tended to approach a certain value at an early stage of the injection. The hydrological and mechanical behavior observed from the CO2 flow, effective stress change and stress-strength ratio revealed that the CO2 injection into the saline aquifer under the given condition would not have significant effects on the mechanical safety of the storage site and the hydrological state around the adjacent fault.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.11
• /
• pp.97-108
• /
• 1994

A modified Karhunen-Loeve transformation technique using normalization and simultaneous diagonalization of two sample covariance matrices is proposed to separate the object from the background. The transformation technique for the separation of local data structure through maximizing the ratio of sample variances between two classes was identified as a promising one for a preprocessing of multi-variate signal processing algorithms using neighborhood operators including morphological filtering. To relate the separation quality of the proposed technique to a morphological measure, average height was defined by using morphological pattern spectrum. A practical implementation of the transformation technique was tested experimentally and the theoretical results were confirmed.

• Tunnel and Underground Space
• /
• v.30 no.4
• /
• pp.306-319
• /
• 2020

Characterizations of Excavation Damage Zone (EDZ), which is hydro-mechanical degrading the host rock, are the important issues on the geological repository for the spent nuclear fuel. In the DECOVALEX 2019 project, Task G aimed to model the fractured rock numerically, describe the hydro-mechanical behavior of EDZ, and predict the change of the hydraulic factor during the lifetime of the geological repository. Task G prepared two-dimensional fractured rock model to compare the characteristics of each simulation tools in Work Package 1, validated the extended three-dimensional model using the TAS04 in-situ interference tests from Äspö Hard Rock Laboratory in Work Package 2, and applied the thermal and glacial loads to monitor the long-term hydro-mechanical response on the fractured rock in Work Package 3. Each modelling team adopted both Finite Element Method (FEM) and Discrete Element Method (DEM) to simulate the hydro-mechanical behavior of the fracture rock, and added the various approaches to describe the EDZ and fracture geometry which are appropriate to each simulation method. Therefore, this research can introduce a variety of numerical approaches and considerations to model the geological repository for the spent nuclear fuel in the crystalline fractured rock.