• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.145-145
• /
• 2012

일반적으로 식생하도에서는 다양한 흐름저항 발생으로 인해 통수능은 감소하고 홍수위는 증가할 수 있다. 식생하도 흐름해석을 위해서는 복합적으로 발생하는 흐름저항이 합리적으로 산정되어야 한다. 하도 흐름에 식생을 고려하는 중요한 관점 중 하나는 식생높이에 대한 수심의 비이다. 본 연구에서는 수심이 식생높이보다 큰 즉, 침수식생 조건에서 식생층의 평균유속 산정식을 제시하고자 하였다. 문헌조사 결과 식생층의 평균유속 산정 방법은 크게 두 가지로 구분되었다. 첫 번째는 흐름을 정상, 등류로 가정하고 전 수심에 대한 힘의 평형을 해석하는 것이고(Stone and Shen, 2002), 두 번째는 2층 구조로 분리하여 식생층과 표면층사이에서 발생하는 전단력을 힘의 평형에 포함시키는 것이다(Baptist et al., 2007; Huthoff et al., 2007; Yang and Choi, 2010). Stone and Shen(2002)의 경우 일부 유속을 과대 산정하는 결과를 보였고, 이는 층간 전단력이 무시되었기 때문이다. 따라서 본 연구에서도 2층 구조론을 이용하였다. 그러나 식생의 밀도가 증가하게 되는 경우 식생이 차지하는 부피는 증가하는 반면, 바닥 전단력의 영향은 감소하게 되므로 식생의 부피는 고려하되 바닥 전단력은 무시하였다. 본 연구를 통해 제시한 식생층 평균유속식을 기존 연구의 수리모형실험 결과와 비교한 것은 <그림 1>과 같다. 비교적 일치하는 결과를 보였지만 Dunn et al.(1996), Rowinski et al.(2002)의 실험결과에 대해서는 유속을 과대 산정하는 것으로 나타났다. 이 들 실험조건의 특징은 침수비가 모두 2.0보다 작다는 것이다. 따라서 침수비 조건에 따라 전단력 ${\tau}_i$의 영향이 있는 것으로 판단된다. 본 연구에서는 침수비 2.0을 기준으로 이보다 낮은 침수비에서는 전단력 ${\tau}_i$를 무시하고, 2.0이상에서는 ${\tau}_i$를 고려한 침수식생하도 식생층 평균유속 산정식을 제시하였고 수리실험결과와 비교한 결과 <그림 2>와 같이 수용할 만한 결과를 얻었다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.1
• /
• pp.1-8
• /
• 2015

Recently, constructions of coastal structure including wind turbine structure have increased at southwest shore of Korea. There is a big difference of tide which rage from 3.0 m to 8.0 m at south and wet shore of Korea, respectively. In such ocean circumstance, large scour may occur due to multi-directional tidal current and transverse stress of the wind. therefore scour surrounding wind turbine structure can make system unsafe due to unexpected system vibration. In this study, hydraulic resistance capacity, i.e., critical velocity and critical shear stress, was evaluated by RCT. Uni-directional and bi-directional hydraulic resistance capacities of the samples which were consolidated by different preconsolidation pressures were correlated with soil resistivities of same samples. According to the correlation, it is possible to estimate hydraulic resistance capacity from electrical resistivity of soil. Through the updating the correlation for various soil types, it is expected that the hydraulic resistance capacity of whole construction site will be simply determined from the electrical resistivity.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.23-24
• /
• 2013

본 연구에서는 해군함정에서 투묘 시 함정별 묘의 파주계수와 그에 파주력 그리고 외력의 세기를 고려한 묘쇄의 적정 신출량을 구할 수 있는 수리모델을 정립하여 제시하고, 이것을 해군이 보유하고 있는 전 함정 승조원들로 하여금 쉽게 사용할 수 있는 적정 묘쇄 신출량을 그래프한 자료를 제시하였다. 본 연구 결과는 해군함정이 투묘시 바로 적용될 수 있을 뿐만 아니라, 이론적인 근거를 제공하는 참고자료로 유용하게 활용될 수 있을 것이다.

• Journal of Korea Water Resources Association
• /
• v.35 no.6
• /
• pp.729-736
• /
• 2002

The computation of normal depth is one of the most important parts in the design of open channel flow, and the best section is in general the most economic section in the case of constructing artificial open channels. Thus the determination of the normal depth of the best section is the essential item in the design of most open channel flows. To estimate the frictional forces a power law is introduced, which is applicable to most situations in open channel flows. Explicit and consistent forms of equations are deduced for the calculation of normal depth of triangular, rectangular and trapezoidal best sections. Furthermore the equations of normal depth are found to have the same form as those of pipe diameter for the design of pipe flow.

• Korean Security Journal
• /
• no.13
• /
• pp.471-485
• /
• 2007

This study is performed to find out what type instructions are produced to players by coaches and what effects are resulted in cooperative spirit of the concerned group. Furthermore the study has its aims at advancing instructors' skills by using finding of it. The study used 'SPSS 11.0 FOR WINDOW - Statistical Package' to analyze the collected samples and dealt with data of 174 individuals. Statistical analysis of the research for hypothesis verification was about frequency, trust level, mutual relationship, variables, and T-verification. The meaningful level for any result was ranged within 95%(p< .05), 99%(p<.01). The finding are as follows. Effects on pleasure, one of elements of team spirits taken by instructor's training style are analyzed as follows. It was proved to be meaningful in relation with a series of activities like training, democratic, social, compensatory aspects and showed also considerable relation with power based behaviors. That says, players are found to enjoy high pleasure when social and bureaucratic behaviors of instructors are very energetic. In addition to that, training, democratic, and compensatory activities didn't show any meaningful effect. Team spirit was found to play a main role between instructor's behaviors and training, democratic, social rewarding activities. Democratic and social acts influence on team spirit. Looking into the detailed aspects, team spirit was resulted very high in the individuals with low democratic mind and was shown high group spirit by groups with high sociable activities. Teamworks was found to be affected by relation between instructor's acts and training, democratic, social and compensatory aspects and it showed meaningful relations with training, social, bureaucratic behaviors. Low degree of training and bureaucratic activities are found to prefer for power team spirit, and high social activities led a strong teamworks. Group binding spirit was influenced by training, democratic, social compensatory, bureaucratic behaviors and it showed to give effects on democratic, social, and bureaucratic activities of instructors. Low degree of democratic and bureaucratic behaviors are found to produce strong team spirit. In contrast with that, strong social activities was found to be motive of powerful team spirit. Value of team spirit was found to play a main role between instructor's behaviors and training, democratic, social, rewarding activities. It didn't show any meaningful effect on behavior of instructors.

• Journal of Soil and Groundwater Environment
• /
• v.8 no.4
• /
• pp.1-11
• /
• 2003

In order to measure aperture variation dependent on normal stress and to characterize on relationship between aperture variation and hydraulic conductivity this study measured apertures of rock fractures under a high resolution confocal laser scanning microscope (CLSM) with application of five stages of uniaxial normal stresses. From this method the response of aperture can be continuously characterized on one specimen by different loads of normal stress. The results of measurements showed a rough geometry of fracture bearing non-uniform aperture. They also revealed different values of aperture variations according to the load stages on each position along a fracture due to the fracture roughness. Laboratory permeability tests were also conducted to evaluate the changes of permeability coefficients related to the aperture variations by different loads. The results of permeability tests revealed that the hydraulic conductivity was not reduced at a fixed rate with increase of normal load. Moreover, the rates of aperture variations did not match to those of hydraulic conductivity. The hydraulic conductivity calculated in this study did not follow the cubic law, representing that the parallel plate model is not suitable to express the fracture geometry corresponding to the results of aperture measurements under the CLSM.

• Journal of Practical Engineering Education
• /
• v.8 no.2
• /
• pp.91-94
• /
• 2016

This study is focused on the development and application of automotive lighting system simulator device to help understanding of the repair and overhaul, electrical instrumentation and automotive circuit checks the contents of the automotive electrical system. The purpose of this study is to define the circuit numeracy, circuit repair preparation skills, detachable power, circuit analysis capabilities, inspection and measurement capability, and repair (problem solving) skills, through the cultivation of clean ability to increase the understanding of electrical equipment maintenance circuitry to verify the improvement of the repair. Automotive electrical device requires understanding of the invisible parts, and understanding of the various symbols and complex circuitry to measure the basic checks and repair are indispensable. This paper would likely contribute to help students to gain more interest in the fields that they feel difficult such as basic skills which necessary to cultivate a variety of electrical equipment fault diagnosis of the basic knowledge needed for electric cars practical.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.329-329
• /
• 2021

우리나라의 농촌유역은 일반적으로 상류의 농업용저수지와 하류의 배수장을 통해 홍수조절이 이루어지며, 각 농업수리구조물의 운영이 유역의 홍수 및 침수 발생에 큰 영향을 끼친다. 농촌유역의 홍수 대응 능력을 향상시키기 위해서는 농업수리구조물의 통합적 운영이 필요하나 현실에서 이를 시험 운영하기 위해서는 시간적·경제적으로 한계가 있다. 따라서 농촌유역 내 농업수리구조물을 연계한 통합 해석 시스템을 활용하여 다양한 구조물 운영 시나리오에 따른 홍수 위험을 예측하고 효율적인 대응 방안을 마련할 필요가 있다. 본 연구에서는 농업수리구조물을 연계한 홍수·침수 모의 시스템을 구축하기 위하여, 농촌유역에서 홍수·침수 모의를 위한 요소별 모듈을 구성하고, 각 모듈의 연계 기술을 개발하였다. 홍수·침수 해석 모듈은 농업용저수지 상류 유역에서부터 하류 하천 및 농경지까지 통합적으로 분석할 수 있도록 강우 분석 모듈, 강우-유출 모듈, 저수지 운영 모듈, 하천 수위 모듈, 농경지 배수 모듈의 5가지로 구성하였으며, 데이터베이스 모듈을 통해 기초자료를 저장하고 모듈 간의 입출력 과정을 처리하였다. 강우 분석, 강우-유출, 농경지 배수 모듈은 python 코드를 기반으로 자체적으로 구축하였으며, 기존의 모형 (FARD, HEC-HMS, GATE2018)들과 비교한 결과 거의 동일한 모의 결과를 나타냈다. 저수지 운영 모듈과 하천 수위 모듈은 각각 미 공병단의 HEC-5, HEC-RAS 모형을 CLI (Command Line Interface) 방식으로 외부 구동하도록 구성하였다. 전체 모듈 간의 연계에는 python 라이브러리인 Dask를 적용하여 대량의 데이터에 대한 병렬 처리 구조를 갖춤으로써 다양한 기상자료와 운영 시나리오에 따른 반복 작업을 효율적으로 수행하도록 구성하였다. 본 연구에서 개발한 홍수·침수 모의 요소별 모듈과 연계 기술을 기반으로, 농업수리구조물의 연계 운영을 통합적으로 모의함으로써 홍수 대비를 위한 효율적인 구조물 운영안을 도출할 수 있을 것으로 기대된다.

• Journal of Korea Water Resources Association
• /
• v.51 no.11
• /
• pp.989-998
• /
• 2018

Connectivity between water source and demand node can be served as a critical system performance indicator of the degree of water distribution network (WDN)' failure severity under abnormal conditions. Graph theory-based approaches have been widely applied to quantify the connectivity due to WDN's graph-like topological feature. However, most previous studies used undirected-unweighted graph theory which is not proper to WDN. In this study, the directed-weighted graph theory was applied for WDN connectivity analyses. We also proposed novel connectivity indicators, Source-to-Node Shortest Pathway (SNSP) and SNSP-Degree (SNSP-D) which is an inverse of the SNSP value, that does not require complicate hydraulic simulation of a WDN of interest. The proposed SNSP-D index was demonstrated in total 42 networks in J City, South Korea in which Pearson Correlation Coefficient (PCC) between the proposed SNSP-D and four other system performance indicators was computed: three resilience indexes and an energy efficiency metric. It was confirmed that a system representative value of the SNSP-D has strong correlation with all resilience and energy efficiency indexes (PCC = 0.87 on average). Especially, PCC was higher than 0.93 with modified resilience index (MRI) and energy efficiency indicator. In addition, a multiple linear regression analysis was performed to identify the system hydraulic characteristic factors that affect the correlation between SNSP-D and other system performance indicators. The proposed SNSP is expected to be served as a useful surrogate measure of resilience and/or energy efficiency indexes in practice.

• Food Science of Animal Resources
• /
• v.27 no.3
• /
• pp.320-328
• /
• 2007

This study was conducted to determine the effect of pH adjustment and the addition of cryoprotectants on the quality characteristics of chicken breast surimi. We prepared surimi from Alaska pollack, as a the control, by two time washing times and the addition of cryoprotectants. Different preparations of surimi were manufactured by adjusting to pH 11.0 and the addition of different addition cryoprotectants during frozen storage (T1 : 5% sorbitol and 0.3% polyphosphate, T2: 4% sugar, 5% sorbitol and 0.3% polyphosphate, and T3: 2% salt, 4% sugar, 5% sorbitol and 0.3% polyphosphate). The moisture content was significantly lower in the control and T3 samples. The crude protein content was increased with storage times. The crude protein was higher in the control. The water-holding capacity, myofibrillar protein and shear force were significantly higher in T3 than other surimi samples. All gel characteristics were significantly higher in the control and T3 than other surimi samples. pH 11.0 adjusted chicken breast surimi had greater lightness than the control, and T3 samples had the highest lightness and whiteness. Sensory evaluations were significantly higher in the control and T3 than the other samples. The gel, and physical characteristics and sensory evaluation of T3 were similar to the control. T3 samples had superior color and pH than the control Alaska pollack surimi.