• The Journal of the Acoustical Society of Korea
• /
• v.31 no.5
• /
• pp.280-287
• /
• 2012

This paper presents a study on the experimental analysis of the impedance characteristics according to the rotational direction of the transmission beam of a cylindrical sensor array. Besides, this suggests a real time control technique of the transmitter output for the effective maximum power transmission, in order to drive efficiently the rotational transmission beam of the active sonar transmitter. The output characteristics of the transmitter and the real-time impedance variations of the sensor array are analyzed under the overload conditions. They are caused by electric and acoustic boundary conditions when the rotational transmission beam is operated. From these results, a new output control method of the transmitter is proposed to protect the transmitter and its loads. It can maximize the output power without the transmission pause even if the transient phenomena occur. The proposed technique is verified from the experiment.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.5
• /
• pp.481-491
• /
• 2022

The active sonar transmission system consists of a transmitter that outputs an electrical signal and an underwater acoustic transducer that converts the amplified electrical signal into an acoustic signal. In general, the transmitter output characteristics are dependent on load impedance, and an underwater acoustic transducer, which is a transmitter load, has a characteristic that the electrical impedance varies largely according to frequency when driven. In such a variable impedance condition, the output of the active sonar transmission system may become unstable. Hence, this paper proposes a design and control technique of a sonar transmitter for transmitting a stable transmission signal even under variable impedance conditions of an underwater acoustic transducer in an active sonar transmission system. The electrical impedance characteristics of the underwater acoustic transducer are experimentally analyzed, and the sonar transmitter is composed of a single-phase full-bridge inverter, an LC filter, and a matching circuit. In this paper, the design and output control method of the sonar transmitter is proposed to protect the transmitter and transducer. It can secure stable output voltage characteristics even if it transmits the Linear Frequency Modulation (LFM) signal. The validity is verified through the simulation and the experiment.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1724-1726
• /
• 2008

본 연구는 릴레이의 코일 접점 신호의 검출을 송신기에서 코일의 데이터를 검출하고 4-20mA데이터를 1/5,000까지의 분해능으로 환산하되 블루투스를 이용한 무선통신으로 전송할 수 있도록 하여 송신기의 각 코일에서 검출된 데이터 값을 인디케이터에 전송하고 다시 릴레이 코일 신호로 만들어 표시하고 제어하도록 한 것이다. 데이터의 전송은 1Port 에서 10 Port까지 릴레이 코일 및 4-20mA 물리량을 이용하여 검출대상의 접점 리액턴스를 각각 측정하여 블루투스를 이용한 무선통신 데이터 값을 송신하는 코일의 접점 송신수단과 상기 릴레이 접점 송신수단으로부터 전송된 데이터 값을 블루투스를 이용하여 무선통신으로 수신한 후, 상기 릴레이 접점에서 전송된 각각의 데이터 값과 전체 물리량으로 연산 처리된 데이터 값을 디스플레이 하고, 데이터의 디스플레이된 값을 통해 리액턴스 출력, 경보음출력, RS232, 4-20mA 출력이 발생되게 하는 인디케이터로 구성하는 블루투스를 이용한 10 Port 코일 리프트 제어 콘트롤러이다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.504-508
• /
• 2000

본 연구는 WDM(wavelength-division-multiplexed) 전송 시스템에서 안정된 파장의 광 송신기를 설계하고 구현하기 위한 것이다. 기본적으로 광 출력의 안정성을 위하여 10uA 미만의 안정성을 갖는 정전류 회로를 설계하려 했으며, 출력되는 광의 파장은 Wavelength Locker를 이용 에러신호를 검출하고, 이 신호로 레이저 다이오드 모듈 내부의 온도를 제어하여 파장을 조절하였다. 최종적으로 이들은 A/D, D/A 컨버터와 $\mu$-Processor로 구성된 마이컴 회로를 통해서 제어되도륵 하였다. 또한 마이컴 회로는 송신기가 WDM 전송 시스템에 장착되었을 때의 시스템과의 인터페이스를 위한 신호들을 출력할 수 있도록 하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.10
• /
• pp.1181-1187
• /
• 2014

In this paper, we implemented polar transmitt converter based on software for next generation digital wireless communication system. The implemented converter converted from rectangular to polar by CORDIC algorithm, and be made up of sweep for DDS output frequency using software control. The implemented converter shows can frequency control up to 1.16GHz within DDS frequency control range by software control. it means that transmitter can be control of varied blocks such as gain, phase, output and etc.. The implemented converter can be applied digital wireless communication system based on SDR.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.4
• /
• pp.699-704
• /
• 2003

This paper has been studied about the design of optical transmitter with stable output wavelength in WDM transmission system. The stabilized constant current circuit is designed with deviation less than 10$\mu$A. The temperature control circuit is constructed for the control of internal temperature of laser diode. Also, the wavelength locker is used in optical output. Finally, A/D, D/A converter and micro-processor are used for the control of these.

• Journal of Advanced Navigation Technology
• /
• v.9 no.2
• /
• pp.121-130
• /
• 2005

In this paper, we designed and fabricated the VHF wireless transmitter for air traffic control. Fundamental performance of the investigated wireless transmitter is designed and fabricated to satisfy existing commercial wireless transmitter specification for air traffic control. 25 W and 50 W of output power can be generated by changing the power amplification part only. It is based on transmitting voice communication using AM modulation. Investigated wireless transmitter for air traffic control consists of four module parts: power supply, control, low power transmission and power amplification. We designed 1W transmitter to operate without power amplification part. It can be used properly in a basic component of CNS/ATM.

• Journal of Satellite, Information and Communications
• /
• v.4 no.1
• /
• pp.28-35
• /
• 2009

We investigate the adaptive channel attenuation compensation of satellite OFDMA downlink users for minimum PAR (Peak to Average power Ratio), which is one of the main challenging issues in satellite OFDMA application. First, we analyze and compare PAR performances of two main different channel attenuation compensation schemes for OFDMA, i.e., PC-OFDMA (power control OFDMA) and AMC-OFDMA (Adaptive Modulation and Coding). While AMC-OFDMA maintains the constant transmission powers through entire user data subcarriers, PC-OFDMA has non-uniform subcarrier transmission powers because subcarrier powers are separately controlled to compensate each user's sub-channel attenuation. We newly found the fact that non-uniform subcarrier power in PC-OFDMA achieves rather reduced PAR compared to AMC-OFDMA and the amount of reduction becomes larger as the power differences among subcarriers increase. Also, there is an additional PAR reduction in PC-OFDMA by optimizing subcarrier grouping scheme for user's sub-channelization.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.3
• /
• pp.251-257
• /
• 2004

AIS(Automatic Identification System), was suggested for the navigational data communication between ships and between ships and shore stations for the better safety of navigation, and it requires two different the transmitting output power level depending on its operating mode. According to ITU's recommendation, these levels should reach within 20 % of its final value in 1 ms. In this paper, an adequate feedback control circuit for power amplifier module is designed and implemented.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.316-317
• /
• 2017

본 논문에서는 새로운 자기 공진형 무선 전력 전송 시스템을 제안한다. 송신부 2개를 배치하여 기존의 1 대 1 자기 공진보다 더욱 넓은 범위를 확보하여 실용성을 높이고자 한다. 동일한 송신부 2개를 배치하여 자기장의 세기를 높임으로써 수신부에 전송되는 전력의 크기 및 거리를 증대시킬 수 있다. 또한, 송 수신코일의 위치에 따라 서로 다른 출력 전력을 위상 제어를 통하여 다양한 범위의 일정한 전력을 제어할 수 있다. 이때 위상천이를 하지 않을 시에 고정된 입력 전류가 흐르게 된다. 하지만 위상천이, 즉 2개의 송신코일에서 전달하는 전류 조절을 시도함으로써 수신 측으로 전달하여 일정한 전력을 얻을 수 있었다. 실험을 통해, 기존의 방식보다 높은 성능을 가짐을 확인하였다.