• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.1
• /
• pp.50-59
• /
• 2000

This paper presents a brief outline of dynamic stability of a damaged ship at final stage of flooding in rough beam wind and waves. One degree-of-freedom, roll equation is adopted with effects of flooding water and external forces due to wind and waves, but without effect of sloshing. We discuss the dynamic stability of the damaged ship in terms of capsizing probability based on risk analysis, the method of which was firstly proposed by Umeda et al.[6] to high speed craft in intact condition. As a result, we can evaluate the dynamic stability of the damaged ship in probabilistic manner according to sea state, operating condition and damage situation.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.4 s.142
• /
• pp.379-387
• /
• 2005

A ship may suffer sinkage and heel due to flood in a compartment caused by damage on a deck. The motion and waveloads of the heeled ship floating in waves have been analyzed by making use of a three dimensional potential theory taking account of the hydrodynamic pressure in the flooded compartments. The shear forces and bending moments due to radiation-diffraction waves have been calculated by the direct integration of the 3-d hydrodynamic pressure on the outer and inner hulls of floating barges. The motion responses and the relative flow rate across the mean free surface of the water in the flooded compartments are also presented.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.5 s.143
• /
• pp.435-447
• /
• 2005

The 24th ITTC Specialists Committee on Stability in Waves is conducting an international benchmark study where numerical methods for the calculation of ship motion in damaged condition are compared on the basis of specified tests in order to assess the present state of the art in this field. The study is finished and some results are presented in this paper providing an initial insight into the status of damage models and numerical methods and a collective assessment of their performance. The preliminary analysis has shown that current methods are satisfactory, capturing the fundamental physical performance of damaged ships in specified conditions.

• Journal of Navigation and Port Research
• /
• v.30 no.6 s.112
• /
• pp.433-438
• /
• 2006

Recently, the earth scale disaster is occurring frequently. Under the effects of global warming, the weather has become unseasonable worldwide. Hence, the earth is experiencing unstable condition with many disasters such as storms and flood damages as well as earthquake. Therefore, it is necessary to consider what we am do to prevent disasters. Consequently, recent warnings indicate that there is a potential risk of massive earthquakes. Consideration of the effects of tsunami to the moored ship is very important. Operational problems such as moored ship motions sometimes become remarkable with large amplitude and long periods in harbor. Moored ship motions may cause the breakage of mooring systems such as mooring lines, fenders or quay. Large and long period moored ship motions are caused by resonant effects. In this paper, the moored ship motions within a harbor by the large-scale tsunami and the effects on the motions and mooring loads with resonant effects are investigated by numerical simulations.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.191-197
• /
• 2006

Recently, the earth scale disaster is occurring frequently. Under the effects of global warming, the weather has become unseasonable worldwide. Hence, the earth is experiencing unstable condition with many disasters such as storms and flood damages as well as earthquake. Therefore, it is necessary to consider what we can do to prevent disasters. A disaster like earthquake will inevitably occur in view of the probabilities. The active period of earthquakes and the inactive periods repeat alternatively. Consequently, recent warnings indicate that there is a potential risk of massive earthquakes. Consideration of the effects of tsunami to the moored ship is very important. Operational problems such as moored ship motions sometimes become remarkable with large amplitude and long periods in harbor. Moored ship motions may cause the breakage of mooring systems such as mooring lines, fenders or quay. Large and long period moored ship motions are caused by resonant effects. In this paper, the moored ship motions within a harbor by the large-scale tsunami and the effects on the motions and mooring loads with resonant effects are investigated by numerical simulations.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.6 s.150
• /
• pp.631-637
• /
• 2006

This paper presents a numerical method to solve the ship motion coupled with internal fluid flow. Physically the internal fluid motion is coupled with the ship motion. Hitherto the previous numerical results of the coupled motion predict only the general tendency with experiments. The main reason of inaccuracy is that the coupled dynamics of ship motion and internal water motion is not accurately accounted. In this study CFD technique based on VOF is employed for the accurate analysis of flooding water motion. Some cases of the 24th ITTC stability committee's benchmark.study for tanker with internal fluid are analyzed by coupling the ship motion and sloshing dynamics. The calculated ship motion is compared with the experimental result to validate the coupled scheme and is in agreement with the experimental result.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.4
• /
• pp.489-497
• /
• 2019

A ship operating under rough sea conditions is exposed to a slamming load due owing to its motion relative to encountered waves. In the process of reentering the water, the ship's structure is temporarily subjected to an impact pressure. In particular, bow flare slamming often occurs in large container ships with a large flare angle, and can cause structural damage. Numerical simulations were performed in this study, and the results were compared with reliable experimental results. The simulation results were also used to estimate the bow flare slamming pressures on a container ship under head sea and oblique sea conditions. It was found that a maximum impact pressure of 475 kPa was generated near the 0.975 station of the container ship under a head sea condition.

• Journal of the Society of Naval Architects of Korea
• /
• v.49 no.1
• /
• pp.52-59
• /
• 2012

Among many factors to be considered for higher safety level requirements, the hull stability in intact and damaged conditions in seaways is of utmost importance. Since the assessment of a damaged ship is complicated due to the highly non-linear behavior, it is widely acknowledged that computational fluid dynamics (CFD) methods are one of the most feasible approaches. Although many research activities are being reported on the damaged ship stability recently, most of them are not designed for validation of CFD studies. In this study, well-designed model tests were performed to build a CFD validation database, which is essential in developing better CFD methods for the damage stability assessment. The geometry of the damaged compartment and test conditions were determined based on preliminary CFD simulations. Free roll decay tests in calm water with both intact and damaged ships were performed and the roll motion characteristics were compared. The damaged ship showed a larger roll damping coefficient and more rapid decrease of roll amplitude than the intact ship. The primary reason of these efforts can be explained by the movement of the flooded water.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.2
• /
• pp.139-145
• /
• 2017

Recently, gusts, typhoon and tsunamis have been occurring more frequently around the world. In such an emergency situation, a moored vessel can be used to predict and analyze other vessel behavior, but if the mooring system is destroyed, marine casualties can occur. Therefore, it is necessary to determine quantitatively whether a vessel should be kept in the harbour or evacuate. In this study, moored ship safety in an exclusive wharf according to swell effects on motion and mooring load have been investigated using numerical simulations. The maximum tension exerted on mooring lines exceeded the Safety Working Load for intervals 12 and 15 seconds. The maximum bollard force also exceeded 35 tons (allowable force) in all evaluation cases. The surge motion criteria result for safe working conditions exceeded 3 meters more than the wave period 12 seconds with a wind speed of 25 knots. As a result, a risk rating matrix (risk category- very high risk, high risk and moderate risk) was developed with reference to major external forces such as wind force, wave height and wave periods to provide criteria for determining the control of capabilities of mooring systems to prevent accidents.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.1 no.2
• /
• pp.82-95
• /
• 1998

In this paper, two series of numerical simulations are performed using LS/DYNA3D: The first series of numerical simulations are collision events between a 310,000 DWT double hull VLCC (struck ship) and two 35,000 and 105,000 DWT tankers (striking ships). Collisions are assumed to occur at the middle of the VLCC with the striking ships moving at right angle to the YLCC centerline. The second ones, grounding accidents of two 40,000 DWT Conventional and Advanced Double Hull lanker bottom structures, CONV/PD328 and ADH/PD328 models. The overall objective of this study is to understand the structural failure and energy absorbing mechanisms during collision and grounding events for double hull tanker side and bottom structures, which lead to the initiation of inner shell rupture and cause the kinetic energy dissipation to bring the ship to a stop. These numerical simulations will contribute to the estimation of damage extents of collision and grounding accidents and the future improvements in lanker safety at the design stage.