• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.231-233
• /
• 2006

본 논문에서는 심플로러를 이용하여 실제와 가장 유사한 DFIG (Doubly-Fed Induction Generator)를 모사하였다. 이를 위해서 실재 바람과 유사한 속도 명령을 함수로 만들어 대체하였고 실제 전기기기의 파라미터 값을 입력하였다. 그동안 풍력발전에 있어서 발전기는 주로 Matlab 등을 이용해서 DFIG를 구현하였기에 실제와 다소 다르고 모의실험으로 대체하기 매우 어려웠지만 Simplorer를 이용하여 실제로 발전기를 설치하지 않고 풍력 데이터로부터 풍력발전의 전반적인 경제성을 파악할 수 있다.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.120-121
• /
• 2014

장거리 이송이 가능한 선형동기 전동기 구조를 제안하고, 수학적 모델링을 하였으며, PI제어기를 포함하는 제어알고리즘을 제안하여, 실험으로 그 결과를 확인하였다. 추진제어기의 출력은 Park's, Clake's Transformation을 이용하여 코일을 구동하는 전류 명령을 발생시켰으며 개별 코일을 독립적으로 구동하는 아날로그 전류제어기를 OP-Amp로 구현하였다. 실험결과는 속도 오차는 4 ~ 10% 이하의 결과를 얻었다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04a
• /
• pp.269-271
• /
• 2003

본 논문에서는 타원 곡선 암호의 성능을 향상시키기 위한 효율적인 최적 확장체 연산 알고리즘을 제안한다. 제안하는 알고리즘은 CPU에서 제공되는 정수 곱셈 명령 1회 실행에 두 개의 하위체 연산을 병렬적으로 수행하도록 함으로써 최적 확장체에서의 곱셈, 제곱, 역원 연산의 속도를 향상시킨다.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.3
• /
• pp.50-55
• /
• 1999

Brushless DC Motor(BLDCM) has high efficiency. But this type of motor needs a rotor sensor which complicates the motor configuration. Rotor position sensor degrades system reliability in the severe environmental condition. In this paper, we study a controller which permits the determination of the rotor position by the back EMF to eliminate the rotor position sensor Also, since the back EMF is zero at standstill, a starting technique which permits the starting of an asynchronous motor without a sensor is described. The controller is implemented using microcontroller for minimal external component.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1181-1186
• /
• 2022

In this study, we have researched for a high-efficiency display with low power, less complicated configuration, and more attractive features than using conventional displays (CRT, LCD, LED, etc.) by manufacturing a propeller display using the POV(Persistence of Vision) phenomenon. After setting the reference point using the Hall sensor, the channel recognition signal and voice recognition signal are transmitted to the display using Bluetooth through the mobile phone application created based on the App program, and the display performs different operations according to the commanded Bluetooth signal. Finally, it was confirmed that the desired information is expressed on the display screen at a motor speed of 1,030 rpm.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.07a
• /
• pp.505-506
• /
• 2023

본 논문은 임베디드시스템을 적용한 대용량 고부하 레이다 플랫폼의 구동 제어 방안을 제안한다. 군사적 방어 목적용 지대공 유도 미사일 시스템의 구성품인 다기능 레이다 시스템은 고중량의 안테나를 구동해야하는 대용량 고부하 레이다 구동 플랫폼이 필수이다. 이 다기능 레이다 시스템은 360도 방위각 전방향을 일정한 속도로 방위각 회전하며 감시정찰 및 방어 임무를 수행한다. 여기서 대부하 레이다 구동 플랫폼은 방위각회전 구동장치를 이용하여 일정한 속도로 360도 방위각 방향으로 안정적인 회전을 가능하도록 구동 제어한다. 본 구동 제어를 실시간으로 구현하기 위해 임베디드시스템인 DSP(Digital Signal Processor)가 포함된 제어모듈은 구동모듈에 회전구동 명령을 인가하여 일정한 회전각속도로 구동하도록 회전구동 모터를 실시간 제어한다. 고부하 레이다 플랫폼은 직구동모터타입의 회전구동모터, 회전체에 신호와 전원을 공급하기 위한 회전슬립링, 회전체의 회전각도를 측정하기 위한 회전센서로 구성된 방위각회전구동장치와 전체 전원을 공급받아 사용 목적에 맞게 변환하여 공급하는 전원모듈, 구동모터에 구동전원을 공급하기 위한 구동모듈, 회전구동 명령에 따라 구동제어하기 위한 제어모듈로 구성된 제어장치로 구분된다. 본 논문에서는 대부하 레이다 구동 플랫폼을 시뮬레이션 모델링으로 구현하고 제안하는 구동 제어 방안은 구동제어시뮬레이션으로 검증한다.

• Journal of Korea Game Society
• /
• v.7 no.1
• /
• pp.53-58
• /
• 2007

In this paper, a game control system was constructed, in which a game was controlled by a remote joystick connected with a power line by the power line communication (PLC) method. The structure of the system was that the connection line between the remote joystick and a PC, and the PC and an audio play device was the home power line. And, the communication data rate between them was 2400 bps. The Polling communication technique was used for the PC to read the joystick's control commands, and to send some acoustic informations to the receiver PLC device. A game was programmed, in which an aircraft was moved according to the joystick's left, right, up, and, down direction, and was shooting its missile after the joystick's shooting button was pushed. The communication delay of about 100 msec between them didn't cause any big problem in playing the game.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.12
• /
• pp.1217-1224
• /
• 2009

A simple and effective guidance and control scheme that enables autonomous three-dimensional path-following for a fixed wing aircraft is presented. The method utilizes the nonlinear path-following guidance law for the outer loop that creates steering acceleration command based on the desired flight path and the current position and velocity of the vehicle. The scheme considers the gravity in the guidance level, where it is subtracted from the acceleration command to form the specific force acceleration command which the aircraft is better suited to follow than the total acceleration command in the inner-loop. A roll attitude control scheme is also presented that enables inverted flight or sideslip maneuvers such as slow roll and knife-edge. A series of aerobatic maneuvers are demonstrated through simulations to show the potential of the proposed scheme.

• Aerospace Engineering and Technology
• /
• v.5 no.2
• /
• pp.1-7
• /
• 2006

This paper presents a new point navigation guidance law which is useful for unmanned helicopters. Predicting the future position, the guidance law generates velocity and heading commands, which are used as input to autopilot. This method differs from conventional guidance law in that it reorients the direction of flight velocity vector directly, not by bank angle indirectly. For flight tests, we have developed a flight control system for a R/C helicopters. The system consists of a flight control computer, navigation sensors, and a ground station The results of the test show that the proposed law guides a unmanned helicopter along a line path within a given area. In the future, we are planning to extend the guidance law to the mission of path following. i.e., waypoint navigation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.1
• /
• pp.85-92
• /
• 2024

In this paper, we developed an intuitive teaching and control system that directly teaches a task by holding the tip of a robotic arm and moving it to a desired position. The developed system consists of a 6-axis force sensor that measures position and attitude forces at the tip of the robot arm, an algorithm for generating robot arm joint speed control commands based on the measured forces at the tip, and a self-made 6-axis robot arm and control system. The six-dimensional force/torque of the position posture of the robot arm operator steering the handler is detected by the force sensor attached to the handler at the leading edge and converted into velocity commands at the leading edge to control the 7-axis robot arm. The verification of the research method was carried out with a self-made 7-axis robot, and it was confirmed that the proposed force sensor-based robot end-of-arm control method operates successfully through experiments by teaching the operator to adjust the handler.