• The KIPS Transactions:PartD
• /
• v.14D no.6
• /
• pp.641-648
• /
• 2007

To develop a dynamic system project in which the requirement changes frequently, it's impossible to finish the development within a fixed-cost due to additional budget occurring in need of requirement creep. To manage the successive project within a fixed-cost, it's better to manage the ratio of necessarily changed size of project and necessary optional requirement. According to Bhagwat, it is occurred in the construction phase. Also, he stated that the software development cost, construction phase cost and requirement cost are equal and it was wrong explanation in the ratio of requirement creep and optional requirement. This paper assumes the requirement creep to be happening in the phase of elaboration and construction. In addition, some differences were supposed to happen between software development cost, construction phase cost, and requirement creep cost. As a result, the reality was preferred rather than the ratio of optional requirement and the ratio of requirement creep.

• Journal of KIISE:Software and Applications
• /
• v.31 no.2
• /
• pp.153-163
• /
• 2004

Many recommender systems are based on Content-based Filtering and Social Filtering Both methods have their own advantages and disadvantages, and they complement each other rather than compete. So incorporating of both methods can make the better system and combination technique controls the quality of the entire recommender system. In this paper, we presented each user has his own tendency to decide which is the better recommendation for himself among the various recommendation results, and suggested the Personalized combination technique. To represent user tendency, we defined and used loyalty, diversity and pioneerity and showed by experiments that our combination technique is useful. This combination technique improved the average coverage 23% and for the ceiling 40%.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.222-222
• /
• 2023

오픈 소스 유체역학 소프트웨어인 OpenFOAM은 다양한 유체 흐름에 적용 가능한 프로그램들로 구성되어 있다. 이 중 interFoam은 밀도가 다른 두 유체(i.e., 물, 공기) 간의 경계를 추적하는 기법을 기반으로 한 프로그램으로, 파랑의 거동 모의에 주로 쓰이고 있다. 파생형 프로그램으로는 동격자(dynamic mesh) 및 중첩 격자 기법(overset grid method)을 interFoam에 추가한 overInterDyMFoam이 있다. 두 기법을 사용하면 각각 여러 영역에서 유체흐름과 다중 물체 간의 상호작용을 효율적으로 모의할 수 있다. 본 연구에서는 overInterDyMFoam을 사용하여 두 개 수문의 개방 움직임을 구현하고 생성된 파랑이 포말대(swash zone)에 접근하였을 때의 흐름 특성을 조사하였다. 수치모형실험 결과 수문 개방 속도가 댐 붕괴 파랑 흐름 전파속도에 영향을 미치는 사실을 발견하였다. 또한, 처오름과 처내림의 상호작용에 의한 난류 운동 특성을 조사하기 위해 수문 개방시간 간격을 0초~3초로 설정하였다. 수치모형실험 결과는 수리모형실험의 수면 변동 시계열과 속도 시계열 결과와 비교하여 모형의 정확성이 검증되었다.

• Progress in Medical Physics
• /
• v.21 no.1
• /
• pp.113-119
• /
• 2010

Software for GafChromic EBT2 film dosimetry was developed in this study. The software provides film calibration functions based on color channels, which are categorized depending on the colors red, green, blue, and gray. Evaluations of the correction effects for light scattering of a flat-bed scanner and thickness differences of the active layer are available. Dosimetric results from EBT2 films can be compared with those from the treatment planning system ECLIPSE or the two-dimensional ionization chamber array MatriXX. Dose verification using EBT2 films is implemented by carrying out the following procedures: file import, noise filtering, background correction and active layer correction, dose calculation, and evaluation. The relative and absolute background corrections are selectively applied. The calibration results and fitting equation for the sensitometric curve are exported to files. After two different types of dose matrixes are aligned through the interpolation of spatial pixel spacing, interactive translation, and rotation, profiles and isodose curves are compared. In addition, the gamma index and gamma histogram are analyzed according to the determined criteria of distance-to-agreement and dose difference. The performance evaluations were achieved by dose verification in the $60^{\circ}$-enhanced dynamic wedged field and intensity-modulated (IM) beams for prostate cancer. All pass ratios for the two types of tests showed more than 99% in the evaluation, and a gamma histogram with 3 mm and 3% criteria was used. The software was developed for use in routine periodic quality assurance and complex IM beam verification. It can also be used as a dedicated radiochromic film software tool for analyzing dose distribution.

• Archives of design research
• /
• v.17 no.2
• /
• pp.437-450
• /
• 2004

Advancement of the media it will be able to express the development and information of computer system causes a problem, how to get the information from plenty of digital data. It needs to the research that provides efficient interface to the user and presents the information visualization standard to the author Consequently, From this paper it investigated analysis of the dynamic diagram and the computer software it led development process of information visualization and result of development outcome. Important developing forms of Information visualization are include Element, Expression, Interface. For developing information visualization model, First, Find the element from many kind of media, include graphic. Second, Find form of the expression from past the diagram which comes to be used plentifully. Last, To get appropriate result it applies the interface, necessary from the interface component which is various uses from computer program. like this, on this paper presents about important three visualization developing forms with detail examples.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.5 s.122
• /
• pp.415-426
• /
• 2007

In a link motion punch press, numerous links are interconnected and each link executes a constrained motion at high speed. As a consequence, dynamic unbalance force and moment are transmitted to the main frame of the press, which results in unwanted vibration. This degrades productivity and precise stamping work of the press. This paper presents an effective method for reducing dynamic unbalance in a link motion punch press based upon kinematic and dynamic analyses. Firstly, the kinematic analysis is carried out in order to understand the fundamental characteristics of the link motion mechanism. Then design variable approach is presented in order to automate the model setup for the mechanism whenever design changes are necessary. To obtain the inertia properties of the links such as mass, mass moment of inertia, and the center of mass, 3-dimensional CAD software was utilized. Dynamic simulations were carried out for various combinations of design changes on some links having significant influences on kinematic and dynamic behavior of the mechanism.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.5
• /
• pp.379-384
• /
• 2014

This article describes the dynamic behaviors of a rubber tired gantry crane(RTGC) under typical load conditions which are used in the design of gantry cranes. In order to investigate the dynamic characteristics of an RTGC, we developed a finite element crane model for its huge structure. The finite element model was validated with the modal test results, e.g., natural frequencies and normal modes. And other components of RTGC were converted into detailed 3D CAD models and finally transformed to rigid body models in a dynamic simulation program ADAMS. The load conditions considered in this paper were a normal operating condition(OP1) and container hanging condition with no external loads. As a result, we could find there was large influence of crane's vibration owing to its structural stiffness and deformation. And the vibration of crane could made the movements of RTGC, which occurs crash or malfunction of crane works.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.1
• /
• pp.137-149
• /
• 2004

A new software paradigm is required on the development of network and various service requirements. With this, many studies on a mobile agent have been made. For the execution of the mobile agent, migration is the most important factor that influences the performance of the mobile agent. In this paper we propose the method that leads to high migration efficiency in order to improve the performance. The features of our migration technique are as follows. First, the migration technique creates the dynamic itinerary that appropriately copes with the network conditions and the platform changes to improve the agent execution efficiency. Second, it perfecters an executed code to reduce the amount of the mobile data and reduces the execution time by instantiating the agent in advance. Third, it improves the execution efficiency by using the checkpoint-based recovery method that does not execute the agent again and recovers the process states even though the errors take place. Though the simulation we compare the proposed method with the existing methods. The simulation result shows that the proposed method outperform the existing methods in terms of migration.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.4
• /
• pp.945-952
• /
• 2013

The R wave of QRS complex is the most prominent feature in ECG because of its specific shape; therefore it is taken as a reference in ECG feature extraction. But R wave detection suffers from the fact that frequency bands of the noise/other components such as P/T waves overlap with that of QRS complex. ECG signal processing must consider efficiency for hardware and software resources available in processing for miniaturization and low power. In other words, the design of algorithm that exactly detects QRS region using minimal computation by analyzing the person's physical condition and/or environment is needed. Therefore, efficient QRS detection based on SOM(Subtractive Operation Method) is presented in this paper. For this purpose, we detected R wave through the preprocessing method using morphological filter, empirical threshold, and subtractive signal. Also, we applied dynamic backward searching method for efficient detection. The performance of R wave detection is evaluated by using MIT-BIH arrhythmia database. The achieved scores indicate the average of 99.41% in R wave detection.

• Journal of KIISE:Software and Applications
• /
• v.36 no.1
• /
• pp.62-69
• /
• 2009

The purpose of document summarization is to provide easy and quick understanding of documents by extracting summarized information from the documents produced by various application programs. In this paper, we propose a document summarization method that creates and analyzes a connection graph representing the similarity of keyword lists of sentences in a document taking into account the mean length(the number of keywords) of sentences of the document. We implemented a system that automatically generate a summary from a document using the proposed method. To evaluate the performance of the method, we used a set of 20 documents associated with their correct summaries and measured the precision, the recall and the F-measure. The experiment results show that the proposed method is more efficient compared with the existing methods.