• The Journal of the Korean dental association
• /
• v.38 no.10 s.377
• /
• pp.962-968
• /
• 2000

치조골과 백악질이 치근막에 의하여 경계되어지지 않고 직접 접촉된 상태인 골유착치는 치조골성장장애, 불안전 맹출, 대합치의 정출, 인접치와의 불안정한 관계 등 다양한 문제를 야기한다. 골유착치의 진단은 방사선 사진에서 치근막의 소실, 타진시의 독특한 소리, periotest를 이용한 동요도 검사 등 다양한 방법이 사용되나 그 신뢰성은 높지 않은 편이다. 따라서 저자는 통산적인 방법은 견인을 시행한 후 견인여부를 평가하여 골유착 여부를 판단하는 임상적 진단법을 사용하고 있다. 골유착치의 치료는 subluxation & extrusion법, autotransplantation법, corticotomy법, segmental osteotomy법, ostectomy법등 다양한 방법이 제시되고 있다. Subluxation & extrusion법은 적용이 간편한 장점이 있으나 골유착의 재발로 인한 교정치료의 실패가능성이 높은 단점이 있다. 본 증례는 다수치의 부분맹출 및 골유착으로 인한 구치부 개방교합이 주소인 환자로 소구치는 통산적인 교정치료법으로 골유착된 대구치는 subluxation & extrusion법을 적용하여 양호한 치료 결과를 얻을 수 있었다.

• Korean Journal of Environmental Agriculture
• /
• v.5 no.2
• /
• pp.119-129
• /
• 1986

Disappearence of the trichlorfon (Dipterex) in the forest, following aerial to control Agelastica coerulea B., were studied by sampling deposits on slide glasses, soils, water, and leaves, and analysing with a gas chromatograph equipped with an electron capture detector. By analysing the amount remained on slide glasses, it was shown that the pesticide was adequately sprayed and nearly all deposit was lost in a day. The amount deposited under the tree was about 1/100 of the amount at an exposed site. Concentration of trichlorfon in creek water was 10 to 100 times as high as the acute toxic level to zooplankton for 6 to 24 hours, The rain could recontaminate the stream water up to the toxic level. Loss rate of trichlorfon from soils showed variations by sampling sites and was generally slower than from slide glasses. Amount deposited on leaves were less than the calculated or expected amount. The loss from leaves were similar to that from soil.

• Journal of dental hygiene science
• /
• v.13 no.4
• /
• pp.418-425
• /
• 2013

This study was investigated in order to provide basic data for prevention of periodontal disease and maintenance through proper lifestyle by finding the relevance of periodontal health with lifestyle habits. Data were collected from total of 326 subjects in their forties and fifties by using questionnaire and examination of periodontal health status. Results were analyzed by using IBM SPSS Statistics 19.0. The smoking status were statistically significant to gingival index (p<0.01), pocket depth (p<0.001), and clinical attachment loss (p<0.001). Smoking amount per day were statistically significant to gingival index (p<0.05), pocket depth (p<0.01), and clinical attachment loss (p<0.001). Duration of smoking were statistically significant to gingival index (p<0.05), pocket depth (p<0.01), and clinical attachment loss (p<0.001). Drinking cycle were statistically significant to gingival index (p<0.05), and clinical attachment loss (p<0.05). It is investigated that smoking (p<0.05) influence on clinical attachment loss. Dental care institute needs to make patients be aware of the fact that excessive smoking and drinking affect the periodontal health status for prevention of periodontal disease and maintenance of oral health. Therefore systematic educational programs to stop smoking and drinking should be prepared.

• Journal of dental hygiene science
• /
• v.18 no.4
• /
• pp.265-270
• /
• 2018

The purpose of this study was to investigate the chemical properties of some commercially available mouthwashes and to ascertain whether the mouthwashes accelerated mineral loss in dental enamel. Five commercially available mouthwashes were selected from the three largest malls in Korea: Perio Total 7 Aqua Cool Mint Strong $Fresh^{TM}$ (PS; LG Household & Health Care Ltd.), Garglin $Original^{TM}$ (Dong-A Pharmaceutical Co., Ltd.), Garglin $Zero^{TM}$ (Dong-A Pharmaceutical Co., Ltd.), Listerine Naturals $Citrus^{TM}$ (LC; IDS Manufacturing Ltd.), and Listerine Cool $Mint^{TM}$ (LM; IDS Manufacturing Ltd.). The composition, pH, and titratable acidity of the mouthwashes were investigated. Six bovine teeth specimens were prepared for each mouthwash group. Each of the six specimens was individually immersed in 30 ml aliquots of mouthwash for 1 minute, 30 minutes, 90 minutes, and 120 minutes, and the samples were placed in a $36.5^{\circ}C$ stirred incubator. The degree of mineral loss (${\Delta}F$) of the tooth surface area exposed to mouthwash, compared with normal teeth, was analyzed by quantitative light-induced fluorescence-digital. The difference in ${\Delta}F$ among mouthwash groups was examined by the Kruskal-Wallis H test (${\alpha}=0.05$). The contents of mouthwashes differed between Listerine and other products, and the pH ranged from 4.09 to 6.75. The titratable acidity of PS was the lowest at 0.63 ml and highest at 9.25 ml for LM. Minor mineral loss was observed when dental specimens were immersed in the Listerine products (LC and LM) for more than 90 minutes, but the degree of mineral loss for Listerine products was not statistically significantly different from that for groups without mineral loss. In conclusion, all five commercially available mouthwashes showed no harmful effects on tooth enamel.

• Journal of Korean Institute of Fire Investigation
• /
• v.6 no.1
• /
• pp.37-41
• /
• 2005

본 실험은 화재현장에서 발견된 소훼된 전기다리미 내부 바이메탈 스위치 접점이 꺼짐 상태로 식별되는 경우와 다리미에 접촉된 바닥재가 소실 상태로 발견되는 경우의 과열 출화흔을 확인키 위해 조건별 A, B, C로 구분하여 실험한 결과 사용중인 전기 다리미를 면셔츠 위에 1시간 정도 방치한 정도로는 자체 과열 발화할 가능성은 희박한 것으로 판단되었고, 내부 안정장치(바이메탈 스위치, 온도휴즈 등)를 제거하여 자체과열 시킨 다리미의 경우 외부 화염으로 소훼시킨 다리미에 비해 발열선 주변과 발열판 바닥이 심하게 용융된 특징점을 발견하였으나, 실험의 조건상 바닥재 탄화소실정도에 대한 과열 특징점은 명확히 구분치 못하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.1
• /
• pp.53-62
• /
• 2010

This paper introduces a classification algorithm which can be applied to a learning problem with incomplete data sets, missing variable values or a class value. This algorithm uses a data expansion method which utilizes weighted values and probability techniques. It operates by extending a classifier which are considered to be in the optimal projection plane based on Fisher's formula. To do this, some equations are derived from the procedure to be applied to the data expansion. To evaluate the performance of the proposed algorithm, results of different measurements are iteratively compared by choosing one variable in the data set and then modifying the rate of missing and non-missing values in this selected variable. And objective evaluation of data sets can be achieved by comparing, the result of a data set with non-missing variable with that of C4.5 which is a known knowledge acquisition tool in machine learning.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.3
• /
• pp.303-308
• /
• 2011

Tooth impaction refers to situations in which the eruption is inhibited by some physical barriers in eruptive path and the tooth remains unerupted beyond the normal time of eruption. The etiology of impacted tooth is controversial, but ankylosis has been suggested probably as a leading role. Impacted primary molars may cause several problems such as space loss, tipping of adjacent teeth, supra-eruption of the antagonists, dislocation of succeeding premolar, cystic change and infection. As one of conventional treatments of impacted primary molars, early tooth extraction or surgical extraction following space regaining when there is space loss has been suggested. However, when they are in normal formation and not ankylosed, orthodontic traction following surgical exposure can be the choice of treatment. In this case, a 3-year-old boy was referred to the department of pediatric dentistry for the unerupted mandibular right second primary molar. After surgical removal of gingiva on the occlusal surface, orthodontic traction was performed. After treatment, we could get normal alignment of primary teeth and the opportunity for normal development of permanent teeth.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.3
• /
• pp.271-280
• /
• 2021

Purpose. The aim of this study was to evaluate the relationship between the patient's occlusion and a cracked tooth by using T-scan occlusal analysis and a quantitative light-induced fluorescence (QLF) technology. Materials and methods. This study was carried out on 51 patients having cracked teeth between January, 2019 and December, 2020. The tooth crack was determined with a Q-ray pen and QLF parameters (ΔF_max and ΔR_max) were obtained by a Q-ray software. T-scan tests were conducted to all subjects and then, the occlusal force and disclosing time were analyzed. Mann-Whitney U test was performed to compare the occlusal force and disclosing time between cracked teeth groups and contra-lateral normal teeth groups (α = .05). Mann-Whitney U test was performed to compare ΔF_max and ΔR_max according to the results of cold/bite tests (α = .05). A Spearman correlation analysis was run to determine the relationship between ΔF_max or ΔR_max and occlusal force or disclosing time (α=.05). Results. The mean occlusal force and disclosing time were significantly higher on cracked teeth than on normal teeth (P < .05). The ΔF_max or ΔR_max were not significantly different according to the results of cold/bite tests (P > .05). There was no correlation between ΔF_max or ΔR_max and occlusal force or disclosing time (P > .05). Conclusion. There was a significant relationship between occlusion and cracked tooth syndrome. QLF has the potential to be a valuable tool for the diagnosis of tooth crack in clinical practice.

• The korean journal of orthodontics
• /
• v.35 no.5 s.112
• /
• pp.371-380
• /
• 2005

The purpose of this experimental study was to evaluate aㅜd compare maxillary arch dimensional and positional changes between first and second premolar extraction groups. The Calorific Machine was used to illustrate tooth movement in three dimensions. The experimental teeth except the first or second premolars were embedded in artifical alveolar bone. The extraction space was closed using arch wires with bull loops into which 15 degree gable bends were placed. Before and after space closure, radiographs were taken in the sagittal and occlusal directions using occlusal films. The results showed greater mean maxillary incisor retraction and less anchorage loss in the maxillary first premolar extraction group than in the maxillary second premolar extraction group. Mesiopalatal rotation of anchor teeth was greater after extraction of a maxillary second premolar than a maxillary first premolar (P<.001).

• The korean journal of orthodontics
• /
• v.38 no.6
• /
• pp.376-387
• /
• 2008

Objective: The purpose of this study was to compare the three dimensional changes of tooth movement using four different types of maxillary molar distalization appliances; pendulum appliance (PD), mini-implant supported pendulum appliance (MPD), stainless steel open coil spring (SP) and mini-implant supported stainless steel open coil spring (MSP). Methods: These experiments were performed using the Calorific $machine^{(R)}$ which can simulate dynamic tooth movement. Computed tomography (CT) images of the experimental model were taken before and after tooth movement in 1 mm thicknesses and reconstructed into a three dimensional model using V-works $4.0^{TM}$. These reconstructed images were superimposed using Rapidform $2004^{TM}$ and the direction and amount of tooth movement were measured. Results: The mean reciprocal anchor loss ratio at the first premolar was 17 - 19% for the PD and SP groups. The appliances using mini-implants (MPD or MSP) resulted in less anchorage loss (7 - 8%). On application of a pendulum appliance or MPD, distalization was obtained by tipping rather than by bodily movement. Furthermore, the maxillary second molar tipped distally and bucally. But on application of MSP, distalization was achieved almost by bodily movement. Conclusions: Regarding tooth movement patterns during molar distalization, stainless steel open coil spring with indirect skeletal anchorage was relatively superior to other methods.