• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.162-168
• /
• 2008

Recently surround molding parts using stainless steel are applied to international and domestic high grade vehicles, but there are great difficulties in die manufacture because of springback and twist after forming process. To solve this problem, finding the method of reduction springback is very important. In this study the springback which might happen during making a die that produce stainless steel surround molding parts is predicted and the geometry of die which satisfy the tolerance between product and panel after forming and springback will be suggested using automatic die compensation module.

• Magazine of the Korea Concrete Institute
• /
• v.1 no.1
• /
• pp.105-114
• /
• 1989

휨을 받는 철근콘크리트 부재 단면의 연화현상은 구조물의 파괴하중 해석시 중요한 인자로 작용한다. 일반적인 탄-소성 이론에 근거한 소성한계해석법을 사용할 경우 철골 구조물에는 적합하지만 철근콘크리트 구조물에는 최대하중 이후의 연화현상으로 인하여 이 이론은 부적합하게 된다. 따라서 본 논문의 주목적은 변위제어방법을 사용하여 철근콘크리트 구조물이 파괴될 때까지의 완전한 거동을 이끌어 내는 것이다. 프로그램을 사용한 계산결과를 보다 빠르고 경제적으로 이끌어 내기 위하여 단면의 성질인 모멘트-곡률, 축력-축\ulcorner향 변형률, 그리고 전단력 변형률 곡선 등을 여러개의 직선적으로 단순화한 모델식을 사용하여 해석한다. 또한 연화현상을 고려한 유한요소의 해석결과는 사용된 요소의 크기에 따라 결과가 매우 다르게 나타나기 때문에 이를 방지하기 위하여 파괴에너지 개념을 도입하여 모멘트-곡률 곡선을 보정하여 구조계산에 적용시킨다. 이와 같이 단면을 층으로 나누어 해석하지 않고 직접 단면의 성질을 나타내는 곡선들을 적용한 본 프로그램으로 보와 골조를 해석한 결과는 실제적인 실험결과와 비교하였을 경우 거의 일치하게 나타난다.

• Transactions of Materials Processing
• /
• v.10 no.3
• /
• pp.206-213
• /
• 2001

Dynamic deformation of metallic materials mostly accompanies substantial amounts of deformation heat. Since the flow stress of deformation is sensitive to temperature, implication of heat due to plastic work is essential to the evaluation of constitutive relations. In this study, a series of compression tests were conducted for SAF 2507 super duplex stainless steel at various temperatures and strain rates. The accumulation of plastic work was calculated through numerical integration and converted into the elevation of temperature. Subsequent logarithmic interpolation deduced isothermal flow surfaces, which were primary input data of finite element analysis. Simple closed die forging process was analyzed and optimized with commercial FEM code applying both raw and calibrated material database. The effect of accounting deformation heat was more noticeable in high-speed forming process.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1998.06b
• /
• pp.1-7
• /
• 1998

본 연구에서는 3차원 솔리드 모델러로부터 Modeling한 후 제작된 model 에 사용자가 원하는 측정 위치를 지정함으로써 자동적으로 측정용 NC Data를 얻을 수 있는 알고리즘을 설계하고 이를 Program화하였다. 3-D Modeler로서 Unigraphics를 사용하였으며, 공작기계는 FANUC Controller를 장착한 Machining Center이다. 측정용 센서는 접촉식 Probe를 사용하였다. 본 연구를 통하여 CAD시스템에서 구축된 Geomaatric Model로부터 직접 측정을 위한 NC data를 얻고 이 data를 가공후의 측정 Data와 비교하여 봄으로써 제품의 가공정밀도를 확인해 볼 수 있으며, 가공시의 간섭 check, 잔삭가공여유, 과절삭등 다양한 정보를 얻을 수 있을 것이다. 향수 지속적인 연구개발을 통하여 data의 통계처리 및 공작기계의 오차 보정등을 고려하여 줌으로써 기계상에서의 측정 data에 대한 신뢰도를 구축할 수 있을 것으로 사료된다.

• Transactions of Materials Processing
• /
• v.13 no.7
• /
• pp.594-599
• /
• 2004

In the sheet metal forming operations, the strain measurement of sheet panel is an essential work which provides the formability information needed in die design, process design, and product inspection. To measure efficiently complex geometry strains, the 3-dimensional automative strain measurement system, which theoretically has a high accuracy but practically has about 3～5％ strain error, is often used. For eliminating the strain error resulted in measuring the strains of formed panels using an automated strain measurement system, the position error calibration method is suggested, which computes accurate strains using the grids with accurate nodal coordinates. The accurate nodal coordinates are calculated by adding the nodal coordinates measured by the measurement system and the position error found using the multiple regression method as a function of the main error parameters obtained from the analysis of strain error in a standard cube. For the verification, the strain distributions of square and dome cups obtained from the position error calibration method are compared with those provided by the finite element analysis and ASAME.

• Transactions of Materials Processing
• /
• v.32 no.4
• /
• pp.215-220
• /
• 2023

In this study, the correction process of stress-strain curves obtained from hot compression test is introduced since the barreling induced by friction and adiabatic heat generation induced by plastic work occur under high strain rate. A shear friction factor was quantitatively estimated by measuring the dimension of barreling and temperature rise due to adiabatic heat generation was directly measured during compression test. Thereafter, the stress-strain curves were re-evaluated by introducing several equations to correct the effects of the friction and temperature rise. It was found that adiabatic factor at strain rate of 10/s is in the range of about 0.5 to 0.75 for Nimonic 80A and decreases as the assigned temperature increases.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.4
• /
• pp.402-410
• /
• 2022

The present study introduces a calibration method of the CSC model implemented in the LS-DYNA program for considering the material properties of ultra-high performance concrete(UHPC). Based on previous experimental studies, various parameters, which constitute three shear failure surfaces, pressure-volumetric strain curve, fracture energy, dynamic increase factor(DIF), and so on, are modified. Then, the proposed calibration method is verified by comparing the numerical result with the experimental data through the single element analysis. In addition, based on the established finite element models, the applicability of the calibrated CSC model is examined for UHPC structures subjected to impact and blast loadings.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.270-273
• /
• 2003

The strain measurement of the panel in the sheet metal forming is essential work which provides experimental data needed to die design, process design, and product inspection. To measure efficiently the complex geometry strain, the 3-dimensional automative strain measurement system, which has high accuracy in theory, but has some 3∼5% errors in practice, is often used. The object of this study is to develop the error compensation technology to eliminate the strain, errors resulted when formed panels are measured using an automated strain measurement system. To achieve the study object, the position error calibration method correcting coordinates of the grid node recognized by a camera using error functions is suggested. Then the position errors were found by calculating the difference in the position of the cube node between real coordinates and measured coordinates in toms of node coordinates and the error calibration equations were derived by regressing the position errors. In order to show the validation of the suggested position error calibration method, finite element analysis and current calibration method was performed for the initial-blankformed.

• Transactions of Materials Processing
• /
• v.18 no.8
• /
• pp.640-645
• /
• 2009

Recently, boss and rib test based on backward extrusion process was proposed to quantitatively evaluate the interfacial friction condition in bulk forming process. In this test, the tube-shaped punch with hole pressurizes the workpiece so that the boss and rib are formed along the hole and outer surface of the punch. It was experimentally and numerically revealed that the height of boss is higher than that of the rib under the severe friction condition. This work is focused on the effect of the punch design and flow stress on deformation pattern in boss and rib test. From the boss and rib test simulations, it was found that there is slight variation in both the heights of boss and rib according to the length of punch land, nose radius, and face angle. However the hole diameter of the punch and the clearance between the punch and die have a significant influence on the calibration curves showing the heights of the boss and rib. In addition, the effect of flow stress on the calibration curves was investigated through FE simulations. It was found that there is no effect of strength coefficient of the workpiece on the calibration curves for estimation of friction condition. On the other hand, the strain-hardening exponent of the workpiece has a significant influence on the calibration curve.

• Transactions of Materials Processing
• /
• v.18 no.3
• /
• pp.210-216
• /
• 2009

Springback, an elastic material recovery after the unloading of stamping tools, causes variations and inconsistencies of final part dimensions. Recently, narrow and long surround molding parts around door frame are applied to high grade automobiles, but there are great difficulties in their die development, construction and tryout because of several springback modes including vertical movement and twist during flange forming process of them. So it is very important to predict springback's quantities of a surround molding part and, moreover, to compensate the die for them adequately, when they can't be corrected by the restrike operation. This paper presents a case study based on the die design for a surround molding part made of stainless steel. The forming and springback predictions, carried out using PAMSTAMP 2G, are reported and compared with the measurement data of the prototype. The predicted springback results were acceptable, so the processes of compensating die using Automatic Die Compensation Module of PAMSTAMP 2G were performed iteratively until the tolerances between the designed shape and the simulation data were satisfied.