• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4C
• /
• pp.163-174
• /
• 2009

Mechanical device using the load cell or strain gage sensor can be influenced by tempearute changes because temperature change can cause a shift in the load cell or straing gage output at zero loading. In this paper, micro cone penetrometers with 1~7mm in diameter, are developed by using an optical fiber sensor (FBG: Fiber Bragg Grating) to compensate the continous temperature change during cone penetration test. Note the temperature compensated method using optical fiber sensor which has hair-size in diameter, and is not affected by environmental conditions because the measured data is the wavelength shifting of the light instead of the intensity of the electric voltage. Temperature effect test shows that the output voltage of strain gage changes and increases with an increase in the temperature. A developed FBG cone penetrometer, however, achieves excellent temperature compensation during penetration, and produces continuous change of underground temperature. In addition, the temperature compensated FBG cone shows the excellent sensitivity and detects the interface of the layered soils with higher resolution. This study demonstrates that the fiber optic sensor renders the possibility of the ultra small size cone and the new fiber optic cone may produce more reliable temperature compensated tip resistance.

• Journal of the Korean Magnetics Society
• /
• v.12 no.5
• /
• pp.168-173
• /
• 2002

Electrostatic discharge characteristics were studied by connecting human body model (HBM) with tunneling magnetoresistance (TMR) device in this research. TMR samples were converted into electrical equivalent circuit with HBM and it was simulated utilizing PSPICE. Discharge characteristics were observed by changing the component values of the junction model in this equivalent circuit. The results show that resistance and capacitance of the TMR junction were determinative components that dominate the sensitivity of the electrostatic discharge(ESD). Reducing the resistance oi the junction area and lead line is more profitable to increase the recording density rather than increasing the capacitance to improve the endurance for ESD events. Endurance at DC state was performed by checking breakdown and failure voltages for applied DC voltage. HBM voltage that a TMR device could endure was estimated when the DC failure voltage was regarded as the HBM failure voltage.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.339-339
• /
• 2012

지난 몇 년 동안, 투명 비정질 산화물 반도체는 유기 발광 다이오드, 플렉서블 전자 소자, 솔라 셀, 바이오 센서 등 많은 응용분야에 연구되고 있다. 투명 비정질 산화물 반도체 그룹들 중, 특히 비정질 IGZO 박막 트랜지스터는 비정질 상태임에도 불구하고 높은 이동도와 낮은 동작 전압으로 훌륭한 소자 특성을 보인다. 이러한 고성능의 IGZO 박막 트랜지스터는 RF 마그네트론 스퍼터링이나 pulsed laser deposition과 같은 고진공 장비를 이용하여 이미 여러 그룹에서 제작되고 발표되었다. 하지만 진공 증착 시스템은 제조 비용의 절감이나 디스플레이 패널의 대면적화에 큰 걸림돌이 되고 있고, 이러한 문제점을 극복하기 위해서 용액 공정은 하나의 해결책이 될 수 있다. 용액 공정의 가장 큰 장점으로는 저온 공정이 가능하기 때문에 글라스나 플라스틱 기판에서 대면적으로 제작할 수 있고 진공 장비가 필요없기 때문에 제조 비용을 획기적으로 절감시킬 수 있다. 본 연구에서는 high-k 게이트 절연막과 IGZO 채널 층을 용액 공정을 이용하여 박막 트랜지스터를 제작하고 그에 따른 전기적 특성을 분석하였다. IGZO의 몰 비율은 In, Ga, Zn 순으로 각각 0.2 mol, 0.1 mol, 0.1 mol로 제작하였고, high-k 게이트 절연막으로는 Al2O3, HfO2, ZrO2을 제작하였다. 또한, 용액 공정 IGZO TFT를 제작하기 전, 용액 공정 high-k 게이트 절연막 캐패시터를 제작하여 그 특성을 분석하였다. 다양한 용액 공정 high-k 게이트 절연막 중, 용액공정 HfO2를 이용한 IGZO TFT는 228.3 [mV/dec]의 subthreshold swing, 18.5 [$cm^2/V{\cdot}s$]의 유효 전계 이동도, $4.73{\times}106$의 온/오프 비율을 보여 매우 뛰어난 전기적 특성을 확인하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5458-5464
• /
• 2012

In LTE-Advanced that different networks coexist, it is considered that it is actually difficult to provide service continuity with a procedural and static control method applied to the existing voice service. This research suggests a resource management framework to support the service continuity effectively based on QoS support. In other words, as context information of mobile terminal and base station changes, set-up of related functions such as ISHO, cell selection, source allocation, load control, and QoS mapping is adapted; each function fits into the change, exchanges the process of reorganization, and interacts; these actions go toward to satisfy service continuity. For this aim, the sequence diagram between the function modules for supporting four kind of ISHO is described and then a scenario for ISHO is considered.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.10
• /
• pp.57-64
• /
• 2002

The structure of conventional CAM(Content Addressable Memory) cell, used to Look-up table scheme in Huffman CODEC, is not performed by being separated in reading, writing and match operation. So, there is disadvantages that the control is complicated, and the floating states of match line force wrong operation to be happened in reading, writing operation. In this paper, in order to improve the disadvantages and proces the data fast, fast Look-up table is designed using DBLCAM(Dual Bit Line CAM)-performing the reading, writing operation and match operation independently and Two-port SRAM being more fast than RAM in an access speed. Look-up table scheme in Huffman CODEC, using DBLCAM and Two-port SRAM proposed in this paper, is designed in Cadence tool, and layout is performed in 0.6${\mu}{\textrm}{m}$ 2-poly 3-metal CMOS full custom. And simulation is peformed with Hspice.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.3
• /
• pp.84-95
• /
• 2005

This paper presents solution heuristics to solving optimal multiple-viewpoint location problems that are based on topographic features. The visibility problem is to maximise the viewshed area for a set of viewpoints on digital elevation models (DEM). For this analysis, five areas are selected, and fundamental topographic features (peak, pass, and pit) are extracted from the DEMs of the study areas. To solve the visibility problem, at first, solution approaches based on the characteristics of the topographic features are explored, and then, a benchmark test is undertaken that solution performances of the solution methods, such as computing times, and visible area sizes, are compared with the performances of traditional spatial heuristics. The feasibility of the solution methods, then, are discussed with the benchmark test results. From the analysis, this paper can conclude that fundamental topographic features based solution methods suggest a new sight of visibility analysis approach which did not discuss in traditional algorithmic approaches. Finally, further research avenues are suggested such as exploring more sophisticated selection process of topographic features related to visibility analysis, exploiting systematic methods to extract topographic features, and robust spatial analytical techniques and optimization techniques that enable to use the topographic features effectively.

• Korean Chemical Engineering Research
• /
• v.54 no.5
• /
• pp.593-597
• /
• 2016

The effects of relative humidity, current density and temperature on the ionic conductivity were studied in PEMFC (Proton Exchange Membrane Fuel Cell). Water contents and water flux in the electrolyte membrane largely affected ion conductivity. The water flux was modelled and simulated by only electro-osmotic drag and back-diffusion of water. Ion conductivities were measured at membrane state out of cell and measured at MEA (Membrane and Electrode Assembly) state in condition of operation. The water contents in membrane increase as relative humidity increased in PEMFC, as a results of which ion conductivity increased. Current enhanced electro-osmotic drag and back diffusion and then water contents linearly increased. Enhancement of current density results in ion conductivity. Ion conductivity of about 40% increased as the temperature increased from $50^{\circ}C$ to $80^{\circ}C$.

• Spatial Information Research
• /
• v.23 no.1
• /
• pp.49-57
• /
• 2015

Due to high density of population and progress of high building construction technologies, the number of high buildings has been increasing. Several information services have been provided to figure out complex indoor structures of building such as indoor navigations and indoor map services. The most fundamental information for these services are indoor network information. Indoor network in building provides topological connectivity between spaces unlike geometric information of buildings. In order to make indoor network information, we have to edit network manually or derive network properties based on the geometric data of buildings. This process is not easy for complex buildings. In this paper, we suggest a method to generate indoor network automatically based on crowdsourcing. From the collected individual trajectories, we derive indoor network information with crowdsourcing. We validate our method with a sample set of trajectory data and the result shows that our method is practical if the indoor positioning technology is reasonably accurate.

• Journal of the Korean Chemical Society
• /
• v.42 no.5
• /
• pp.519-525
• /
• 1998

The critical micelle concentration $(CMC^{\ast})$ and the counterion binding constant (B) in a micellar state of the mixed surfactant systems of dodecylpyridinium chloride (DPC) with dodecyltrimethylammonium bromide (DTAB), tetradecyltrimethylammonium bromide (TTAB), and cetyldimethylethylammonium bromide (CDEAB) were determined at $25^{\circ}C$ as a function of ${\alpha}_1$ (the overall molc fraction of DPC) by the use of electric conductivity method. Various thermodynamic parameters $(X_{i},\;{\gamma}_{I},\;C_{i},\;a^{M}_{i}, \beta,\;{\Delta}H_{mix}, \;and\; {\Delta}G^{o}_{m})$ for the micellization of DPC/DTAB, DPC/TTAB, and DPC/CDEAB mixtures were calculated and analyzed for each system by means of the equations derived from the pseudophase separation model. The results show that the DPC/DTAB mixed system has the greatest deviation and the DPC/CDEAB mixed system has the smallest deviation from the ideal mixed micellar model.

• Magazine of the Korea Concrete Institute
• /
• v.6 no.1
• /
• pp.89-100
• /
• 1994

The current test procedure for transfer length, which determine transfer length by measuring concrete strain, has an actual bond stress state in the prestressed pretensioned member : however, it is difficult to determine the bond properties of maximum bond stress and bond stiffness with this method. It is also difficult for design engineer to understand and select a correct safety criterion from the widely distributed results of such a ransfer test alone. An alternative testing procedure is provided here to determine the bond properties without measuring the concrete strain. In this test the bond stress is measured directly by creating a similar boundary condition within the transfer length in a real beam during the transfer of prestressing force. The prestressing force was released step by step by step from the unloading side. The release of force induces a swelling of the strand at the unloading side of concrete block, bonding force in the block, and a bond slip of the strand toward the other side of the block. Two center-hole load cells are used to record the end loads until the point of general bond slip(maximum bond stress). It is suggested that this test procedure be performed with the ordinary transfer test when determining the transfer length in a prestressed, pretensioned concrete beam.