• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.1
• /
• pp.53-60
• /
• 2014

Redundant handovers cause degraded quality of service to passengers in vehicle. This paper proposes a handover scheme suitable for users traveling in vehicles, which enables continuous learning of the handover process using a discrete-time Markov chain (DTMC). Through AdaBoost machine learning algorithm, the proposed handover scheme avoids unnecessary handover trials when a short dwell time in a target cell is expected or when the target cell is an intermediate cell through which the vehicle quickly passes. Simulation results show that the proposed scheme reduces the number of handover occurrences and maintains adequate throughput.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.1
• /
• pp.20-33
• /
• 2002

Usage of ATM AAL2 packets becomes dominant to increase transmission efficiency of voice traffic in the backbone network. In case of voice service that uses AAL2 mechanism, if resources of network are enough, connection of new call is accepted. However, due to packets generated by the new call, transmission delay of packets from old calls can increase sharply. To control this behavior, in this paper we present an AAL2 buffer management scheme that allocates a virtual buffer to each call and after calculating its propagation delay variation(PDV), decides to drop packets coming from each call according to the PDV value. We show that this packet dropping algorithm can effectively prevent abrupt QoS degradation of old calls. To do this, we analyze AAL2 packet composition process to find a critical factor in the process that influences the end-to-end delay behavior and model the process by K-policy M/D/1 queueing system and MIN(K, Tc)-policy M/D/1 queueing system. From the mathematical model, we derive the probability generating function of AAL2 packets in the buffer and mean waiting time of packets in the AAL2 buffer. Analytical results show that the AAL2 packet dropping algorithm can provide stable AAL2 packetization delay and ATM cell generation time even if the number of voice sources increases dramatically. Finally we compare the analytical result to simulation data obtained by using the COMNET Ⅲ package.

• Journal of Advanced Navigation Technology
• /
• v.18 no.2
• /
• pp.142-150
• /
• 2014

In this paper, the performance analysis results of time/frequency synchronization and cell search algorithm are presented for aeronautical mobile airport communication systems (AeroMACS). AeroMACS is based on IEEE 802.16e mobile WiMAX standard and uses the aeronautical frequency band of 5GHz with the bandwidth of 5MHz. The simulation model of AeroMACS is designed and the performance evaluation is conducted with the various airport channel models such as apron (APR), runway (RWY), taxiway (TWY), and park (PRK). The proposed synchronization unit was designed in hardware description language (HDL) and implemented on FPGA. Also, the real-time operation was verified and evaluated using FPGA test system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.8
• /
• pp.30-41
• /
• 2001

In this paper, the architecture of Dynamic GSMP V3(General Switch Management Protocol Version 3), an open interface protocol with resource management functions for efficient IP service on ATM over MPLS, is proposed and implemented in hardware. And we compare and analyze the proposed GSMP with the GSMP under standardization process in terms of CLR (Cell Loss Rate). We design the Slave block of the Dynamic GSMP V3 using SAM-SUNG SoG $0.5{\mu}m$ process, which performs functions for switch connection control in the ATM Switch. In order to compare difference performanaces between the proposed method and the conventional one, we conducts simulations using the minimum buffer search algorithm with random cell generation. The exponential results show that the proposed method leads to performance enhancement in CLR.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.2937-2943
• /
• 2013

This paper introduces a real-time flocking simulation framework through radial basis function(RBF). The proposed framework first divides the entire environment into a grid structure and then assign a vector per each cell. These vectors are automatically calculated by using RBF function, which is parameterized from user-input control lines. Once the construction of vector field is done, then, flocks determine their path by following the vector field flow. The collision with static obstacles are modeled as a repulsive vector field, which is ultimately over-layed on the existing vector field and the inter-individual collision is also handled through fast lattice-bin method.

• Journal of the Korea Convergence Society
• /
• v.8 no.9
• /
• pp.365-372
• /
• 2017

Squat exercise is one of the important free weight exercises that can safely and effectively expect the athletic performance by establishing the rationale. Therefore, it is necessary to study the side effects caused by incorrect exercise, scientific countermeasures and to develop a exercise estimation model. It is effective and accurate to use a variety of assistive devices to calibrate athletic posture. The issues of the structural analysis for designing a foot plate for squat exercise is to model the behavior by the dynamic behavior. It should be consider that the center of gravity of each segmented body is different when the maximum load is applied. It is applied to complete system design through simulation method with kinematic dynamic, ground reaction force and load analysis for the free weight exercise equipment, VR device, and safety foot plate. In this paper, the authors propose the design method for the vertical load distribution applied in the design of the foot plate used for the squat exercise mechanism, and based on these results, design make the more safe and reliable free weight exercise equipment system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.7B
• /
• pp.1268-1278
• /
• 1999

In this paper, we propose an analytic method for dimensioning of traffic descriptors at the leaky bucket-based UPC for VBR MPEG video traffic on ATM networks. We analytically derive cell violation probabilities at the UPC by using the proposed scene-based video traffic model, and then we show that it is possible to select sets of traffic descriptors that have the same required violation probability. For two example video traces, numerical results show that our proposed traffic descriptors dimensioning method can approximate well the simulation-based traffic control results of the real video traces. When the effective bandwidth allocation method of an ON/OFF model is used for the call admission control in the networks, we present an efficient traffic descriptor selection method by studying the allocated bandwidth to each possible traffic descriptor set.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.7
• /
• pp.1065-1073
• /
• 1999

This paper analyzed the ground bounce caused by the power plane resonance in the multilayered printed circuit board(PCB) using the Haar-wavelet-based Multiresolution Time-Domain (MRTD). In conventional Finite-Difference Time-Domain(FDTD), the highly fine vertical cell is needed to represent the distance between $V_{cc}$ plane and ground plane since the two planes are very close. Therefore the time step $\Deltat$ must be very small to satisfy the stability condition. As a result, a large number of iterations are needed to obtain the response in wanted time. For this problem, this paper showed that the computation time can be reduced by application of the MRTD method. The results obtained by the MRTD agree very well with those by FDTD method and analytic solutions. In conclusion, this paper proved the efficiency and accuracy of MRTD method for analyzing the EMI/EMC problems in PCB.

• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.56-57
• /
• 2014

본 논문에서는 $LiCoO_2$ 원통형(cylindrical)셀을 확장칼만필터(extended Kalman filter; EKF) 추정알고리즘에 적용 시 등가회로모델 차이에 따른 SOC(State-of-charge) 추정성능의 비교 분석을 진행하였다. 첫 번째, 등가회로 모델의 성능을 좌우하는 RC-ladder의 개수에 따른 SOC 추정성능의 차이를 비교하였고, 두 번째, 모델 단순화에 따른 불가피한 모델의 에러를 줄이고자 사용되는 노이즈 모델(noise model) 및 데이터 리젝션(data rejection)의 유무에 따른 SOC 추정성능을 비교분석 하였다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.794-801
• /
• 2006

The linkage framework of geometric modeling and analysis based on the NURBS technology is developed in this study. The NURBS surfaces are generated by interpolating the given set of data points or by extracting the necessary information to construct the NURBS surface from the IGES format file which is generated by the commercial CAD systems in the present study. Numerical examples shows the rate of displacement convergence according to the paramterization methods of the NURBS surface. NURBS can generate quadric surfaces in an exact manner. It is the one of the advantages of the NURBS. A trimmed NURBS surface that is often encountered in the modeling process of the CAD systems is also presented in the present study. The performance of the developed geometrically exact shell element integrated with the exact geometric representations by the NURBS equation is compared to those of the previous reported FE shell elements in the selected benchmark problems.