• Journal of Korea Ship Safrty Technology Authority
• /
• s.28
• /
• pp.46-63
• /
• 2010

플레저보트의 고강도 및 경량화 추세에 따라 복합재료 등 관련 소재의 경량화가 요구되었고, 이에 부응하여 관련 신소재 개발과 진공성형 신건조공법 등이 출현하였으며, 이러한 신공법을 이용한 선박건조가 증가하고 있는 실정에 따라 선박의 구조강도 평가가 중요한 과제로 부각되고 있다. 또한 선박의 안전성 확보와 고객의 편리 도모를 위한 플레저보트 구조강도 확인을 위한 시험방법 등도 다양화할 필요가 있다. 따라서 진공적층 및 수적층 성형방법으로 건조한 플레저보트를 대상으로 선체구조 강도 시험 결과를 비교 분석하여 우리 실정에 적합하고 플레저보트의 안정성 평가를 위한 선체구조 강도 시험 기준안을 제시하고자 한다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.1
• /
• pp.66-70
• /
• 2005

Cupid's bow, upper lip, columella, and ala of nose are esthetically important, in which their symmetrical plasties determine success or failure of the surgery in cleft lip and palate patients. Z-palsty and its modifications are simple and effective. The double Z-plasty is economical in surgical time and esthetics in reconstructing the cupid's bow compared with other methods. We report a 29-year-old male patient who represented reversed cupid's bow and whistle deformity after the primary repair of the cleft lip. He was corrected the cupid's bow using a double Z-plasty. The reversed cupid's bow was corrected to a normal shape and the whistle deformity disappeared. The tightness of the upper lip was relieved after the operation. The double Z-plasty was esthetically successful because the procedure was limited in the vermilion and did not produce a new scar on the skin. Furthermore, the lip tubercle became protuberant. The cupid's bow was symmetrically smoothly curved at 4 years after the operation. These results indicate that the double Z-plasty is simple, less traumatic to the surrounding tissues, and suitable for the correction of whistle deformity.

• 보일러설비
• /
• s.11
• /
• pp.150-153
• /
• 1989

• Journal of Digital Convergence
• /
• v.11 no.4
• /
• pp.147-152
• /
• 2013

Now, plastic surgery has become the industry for beauty. In order to know the characteristics of high-visit web sites that many people have visited, 33 high visit websites of plastic surgery were compared to 60 benchmark sites of same industry. We selected 34 web site attributes that can be measured objectively from existing studies. For analysis, Multiple Discriminant Analysis(MDA) is conducted for searching what attributes divide two group definitely. The result of this study shows the dividing attributes fall into 2 categories like 'Community', 'Up to date'. Thus, we are able to conclude that high-visit plastic surgery web sites are community-centric site but not contents-centric and are maintained with tide up to date. The methodology employed in this study provides an efficient way of improving satisfaction of visitors of plastic surgery website.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.7
• /
• pp.4381-4387
• /
• 2015

Ship hull is a compound curved shape and most of shipyards have been using gas heating method for the surface forming of steel plate. This traditional forming process have problems such as difficulties in heat input control and poor working conditions due to loud noise and air contamination. Recently, researches on automatic hull forming system have been conducted using high frequency induction heating method which have good control ability and favorable working environment. In this study, the induction heating simulation system for curved surface forming of steel plate was developed and induction heating experiments were performed. Based on the results of this study, efficient induction heating coil design and optimal heating conditions for the automatic hull forming system can be obtained.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.5709-5715
• /
• 2012

Injection molding product is commonly used for reducing the weight of automotive vehicle, and door regulator guide rail with plastic material is also made by injection molding process. In order to improve the injection molding performance of plastic regulator guide rail, optimal molding condition is suggested by numerical simulation and DOE after obtaining the sensitivity of parameters for regulator rail manufacturing on warpage and fill time. Furthermore, multi direct gate method and optimal cooling circuit are introduced to get the uniform temperature distribution and better cooling efficiency in molding product. The effect of the proposed design on the injection molding performance is verified by the test of prototype of plastic regulator guide rail.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.1-6
• /
• 2010

This study presents the preform injection molding and the blow molding of the injection stretch-blow molding process for PET bottles. The numerical analysis of the injection molding and the blow molding of a preform is considered in this paper using CAE with a view to minimize the warpage and the thickness. In order to determine the design parameters and processing conditions in injection/blow molding, it is very important to establish the numerical model with physical phenomenon. In this study, a three dimensional model has been introduced for the purpose and flow simulations of filling, post-filling and cooling process are carried out. The simulations resulted in the warpage in good agreement with the measurements. Also, from the result of numerical analysis, we appropriately predicted the warpage, deformation and thickness distribution along the product walls.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.5
• /
• pp.681-688
• /
• 1996

To investigate the effort of drying methods on the physicochemical properties of agar, gel strength, viscosity, melting and setting point, and phase transition by differential scanning calorimetery (DSC) during its heating were determined. In addition the structural differences of agar powder by scanning electron microscope (SEM) was examined. The most shortest onset temperature of gel strength increase was extruding method among any other methods. Viscosity of agar with hot air method, 400.00 cps at $45^{\circ}C$, was markedly increased, but with spraying and extruding ones were little change. The melting and setting point, and the temperature for maximum endothermic and enthalpy for agar with extruding one, $80.01^{\circ}C,\;36.05^{\circ}C\;and\;61.72^{\circ}C,\;0.73\;cal/g$, respectively, were lowest among the drying ones. But in the case of reheating after gelling, there were little change in all methods. Observing the surface structure of agar with SEM, extruding method showed the most unstable with absorptive property.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.461-467
• /
• 2021

Among the defect factors that can occur when a wafer-level lens is molded using a thermosetting material, the mold sticking problem of a molded lens during the release process can damage the molded substrate and deform the substrate at the wafer level. An experiment was conducted to examine the factors affecting the demolding force in the lens forming process. The demolding force was examined according to the coating material of the molds. The mold was surface-treated with ITO and Ti, followed by plasma treatment in an O2 atmosphere. A DLC coating was then performed, and the curing and releasability were examined. A coating method for the pull-off experiment was selected based on the results. To measure the demolding force according to the curing process conditions, a method of curing at a constant pressure and a method of curing at a constant position were applied. As a result, the TiO2 surface treatment reduced the release force. When cured by controlling the location, curing shrinkage can reduce the adhesion energy of the interface during curing, resulting in better demolding.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.4713-4718
• /
• 2013

Nowadays, three-dimensional computer added design(3D CAD) tool are widely and actively used for design of mechanical machine. Because using the tool is more effective to understand design concept and to collaborate with other operation than using two-dimensional design tool. In this study, the 3D CAD tool which is called I-DEAS was applied for three-dimensional modeling of main parts and assembling of modeled parts for identification the entire shape of a injection molding machine. In addition, a study was also performed regarding reduction for the weight of main plates for saving production cost and energy in the machine. A finite element method(FEM) program in I-DEAS tool was used for the improvement study. First, the current main plates were structural analysed and then the plate deformations, weak regions and stress distributions were graped. By the FEM results, the 2nd improved designing of the plates was conducted such as reinforcement or slimming of the plate wall thickness. The 2nd structural FEM was performed for verification of the redesigned plates and then the FEM results were compared with the 1st FEM's result. The weight of the main plates were averagely reduced approximately 3 - 7%. By these results, it was seemed that the improved plates have a useful availability.