• Polymer(Korea)
• /
• v.28 no.5
• /
• pp.374-381
• /
• 2004

Gas permeability of low density polyethylene (LDPE) film containing zeolite powder for $CO_2,\;O_2$ and $N_2$ were investigated. Zeolite powders modified by cations or surfactant were compounded with LDPE to produce $20 wt\%$ masterbatch. After blending the masterbatch with LDPE, zeolite filled films were prepared by the blown film process. Finally, the composite films containing zeolite loadings of 0, 3,5, and $10 wt\%$ were produced. A gas permeability apparatus based on the variable volume principle was designed to analyze the characteristics of films. Experiments showed a general trend that gas permeabilities first decreased and then increased as the zeolite content was increased. Surfactant modified zeolite showed a better interfacial adhesion with the matrix, but the film did not show a discernible difference in gas permeability compared with the other modified films. The difference of temperature dependences in the gas permeabilities of composite films was slightly smaller than that of LDPE film.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.2
• /
• pp.219-225
• /
• 2014

An automatic combination and assembly system for phone-camera lens modules was developed. The system enables the assembly of the relative orientation of the individual lenses making up the lens module. Conventional assembly systems assemble a lens module from eight assembly units. The developed system reduces this number to half by combining each lens and a spacer into a single assembly unit. Also, the number of transfer stages for sequential assembly is minimized without increasing the assembly time. Therefore, high productivity and a footprint that is only about 25 % of that of a conventional assembly system can be realized. The system features a modular design to allow it to cope with rapid changes in the market. Only a few components, such as the picker and guide, need to be replaced for changing to a new assembly model.

• Journal of KIISE:Information Networking
• /
• v.29 no.2
• /
• pp.129-140
• /
• 2002

In this paper, we consider the problem of packet transmission in a wavelength division multiplexed(WDM) optical network. Our network model assumes that receivers are fixed-tuned and transmitters are tunable such that optical lasers assigned to transmitters have limited access to the network bandwidth: hence each node must be equipped with multiple optical lasers and/or multiple optical filters in order to maintain a single-hop network. We first analyze scheduling all-to-all packet transmissions and present optimum scheduling for all-to-all packet transmissions. We then extend the analysis to the case of arbitrary traffic demands. We show that the scheduling with arbitrary traffic demand is NP-hard. A heuristic algorithm based on list scheduling is presented. The upper bound so obtained is compared with the lower bound and provides performance guarantees with arbitrary demands. The result are applicable to arbitrary tuning delay, arbitrary number of wavelength channels and optical lasers of arbitrary tuning ranges.

• Journal of Digital Convergence
• /
• v.17 no.10
• /
• pp.405-410
• /
• 2019

This study is an primary analysis on convergence of porcelain lacquer painting art which is composed of porcelain art and raw lacquer technic. As a part of ceramic art, this study suggest 3 ways of porcelain lacquer decoration with understanding of its history and contemporary status. Lacquer technic gives stability for surface paintings and it also has various media to express its beauty. Porcelain lacquer decoration art contains artistic value and pragmatic purpose for daily life usage. These days, due to unavailability for mass production, it tends to be tried for art work purposes. However this artistic technic and value can be applied to porcelain goods, so that it will raise aesthetic pleasure and cultural diversity.

• Journal of Adhesion and Interface
• /
• v.4 no.4
• /
• pp.15-21
• /
• 2003

Polysulfone/organophilic layered silicate nanocomposites were prepared in the range of 0.25 to 9 wt% of organophilic-layered silicate by solution blend. Nano-hybridized films were cast from the blend solution. Exfoliation and intercalation of the polysulfone/organophiliclayered silicate nanocomposite films were confirmed by an X-ray diffractometer and a transmission electron microscope. Surface morphologies of polysulfone/organophilic layered silicate nanocomposite films were determined by a scanning electronic microscope and an atomic force microscope. When the organophilic layered silicate was added more than 1.5 wt%, the surface roughness (RMS) was rapidly increased because clusters of intercalated organophilic layered silicate particles existed on the polysulfone/organophilic-layered silicate film surface. Surface tension revealed an upward tendency over the contents of 1.5 wt% organophilic layered silicate in polysulfone/organophilic layered silicate nanocomposite. The change of surface morphology in polysulfone/organophilic layered silicate nanocomposite were affected by nano scale dispersed and intercalated organophilic layered silicate particles.

• Journal of Sericultural and Entomological Science
• /
• v.50 no.2
• /
• pp.71-75
• /
• 2012

Silk is a natural polymer that has the advantages of the biocompatibility, excellent mechanical strength, low immune rejection, and molding facility. But silk does not dissolve easily in water or general solvent. To investigate the characteristics of silk biological membranes according to dissolving condition of silk fibroin, we made the silk biological membranes using silk fibroin solutions with different amount and dissolving time of silk. The characterizations of the silk biological membranes such as morphology, structure, and mechanical strength were observed. Although each biological membrane has the same fibroin content, there was a significant difference in the thickness and transparency. But there was no significant change in the molecular weight of the silk fibroin solutions and morphology of silk biological membranes. We were established the manufacturing condition for silk fibroin biological membrane. So we expect that the conditions will help in the development of medical supplies in the future.

• Journal of Korea Foundry Society
• /
• v.41 no.5
• /
• pp.445-453
• /
• 2021

Computational thermodynamics for various alloy systems is well known as the CALPHAD technique. Gibbs energy model parameters for each phase are obtained from experimentally measured thermodynamic properties and are mainly used to predict areas not experimentally measured and to analyze experimental results thermodynamically. In this study, the thermodynamic modeling of the Ni-Cr-Nb-C quaternary system is conducted for a thermodynamic analysis of the phenomena by which heat-resistant cast alloys (IN-657) are destroyed in certain areas after long-term use. The stable phases in the system according to the Cr content, phase fraction depending on the temperature, and long-range ordering parameters for the Ni₂Cr phase are calculated and compared to results obtained experimentally. The calculated thermodynamic properties suitably explain the experimentally reported fracture temperature range and the results of stable phases formed in the fractured areas. Thermodynamic modeling through the CALPHD method is expected to be useful for analyzing and predicting the thermodynamic behaviors of various cast alloys.

• Applied Chemistry for Engineering
• /
• v.29 no.6
• /
• pp.677-681
• /
• 2018

In this study, the carbon block was prepared using the fluorinated coke and binder pitch by molding compression to increase its density. After fluorination, it is confirmed that the fluorine element on the coke surface was introduced up to 24.14 at% using XPS analysis. The wettability between the fluorinated coke and binder pitch was evaluated according to the reaction temperature. From the result of contact-angle tests, it can be found that the wettability was improved up to 64.7% as more fluorine atoms were introduced on the surface of cokes. Also, the density of the carbon block with the highest amount of fluorine increased with 6.8% compared to that of using the carbon block prepared by the untreated cokes.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.5 s.108
• /
• pp.461-475
• /
• 2006

In this paper, it is described about the tri-band mobile antenna system design to provide broadband multimedia and direct broadcasting services using goo-stationary Koreasat 3, simultaneously operated in Ka/K/Ku band. The radiating part of the antenna system with a fan beam characteristic in the elevation plane is composed of the quasi-offset dual shaped reflector and the tri-band feeder. The tri-band feeder is also composed of the Ka/K dual band feeder with the protruding dielectric rod, the circular polarizer, the ortho-mode transducer and the circular-polarized Ku band feed array. Especially, the Ka/K dual band circular polarizer was realized firstly using the comb-type structure. For fast satellite-tracking on the movement, the Ku band feed array has the structure of the $2{\times}2$ active phased array which can make electrical beams. And, the circular-polarized characteristic in the feed array was improved by $90^{\circ}$ rotating arrangement of four radiating elements polarized circularly by a $90^{\circ}$ hybrid coupler, respectively. Four beam forming channels to make electrical beams at Ku band are divided into the main beam channel and the tracking beam channel in the output, and noise temperature characteristics of each channel were analyzed on the basis of the contributions of internal sub_units. From the fabricated antenna system, the output power at $P_{1dBc}$ of Ka_Tx channel was measured more than 34.1 dBm and the measured noise figures of K/Ku_Rx channels were less than 2.4 dB and 1.5 dB, respectively, over the operating band. The radiation patterns with co- and cross-polarization in the tri-band were measured using a near-field measurement in the anechoic chamber. Especially, Ku radiation patterns were measured after correcting each initial phase of active channels with partial radiation patterns obtained from the independent excitation of each channel. The antenna gains measured in Ka/K/Ku band of the antenna system were more than 39.6 dBi, 37.5 dBi, 29.6 dBi, respectively. And, the antenna system showed good system performances such as Ka_Tx EIRP more than 43.7 dBW and K/Ku_Rx G/T more than 13.2 dB/K and 7.12 dB/K, respectively.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.3
• /
• pp.218-225
• /
• 2005

본 연구의 목적은 치아 회분말과 연석고 및 알긴산을 혼합하여 이식한 후 초기 골 형성을 알아보는 데 있다. 백서 30마리의 두개골에 8mm 직경의 골결손부를 형성한 후 인간의 치아 회분말과 연석고 및 알긴산을 혼합하여 이식한 후 대조군, 치아 회분말과 연석고 처치군, 그리고 치아 회분말과 연석고 및 알긴산 혼합 처치군에서 각각의 골 결손부 치유과정을 조직병리학적, 조직형태계측학적으로 비교 관찰하였다. 통계학적으로 주간 변화(4주, 8주)는 유의하지 않았고, 각 그룹 간에 있어도 치아 회분말과 연석고 처치군과 치아 회분말과 연석고 및 알긴산 혼합 처치군 간 모두(4주, 8주) 유의한 차이가 없었다. 그러나 이들 치아 회분말과 연석고 처치군과 치아 회분말과 연석고 및 알긴산 혼합 처치군은 대조군에 비해서는 유의하게 우수한 신생골 형성을 보였다. 비록 통계학적으로는 치아 회분말과 연석고 처치군과 치아 회분말과 연석고 및 알긴산 혼합 처치군이 유의한 차이를 보이지 않았지만 치아 회분말과 연석고 및 알긴산 혼합 처치군에서 보다 더 우수한 신생골 형성 경향을 보였다. 뿐만 아니라, 신생골의 내용면에서도 치아 회분말과 연석고 및 알긴산 혼합 처치군에서 좀더 많은 신생 직조골의 융합이나 골 소주형성이 관찰되어 신생골의 형성 및 성숙에 알긴산이 역할을 담당하는 것으로 사료되었다. 결론적으로 골결손부 치료 방법으로 치아 회분말과 연석고 처치군 또는 치아 회분말과 연석고 및 알긴산 혼합 처치로 결손부에 이식하는 것은 신생골 형성의 양적, 질적 개선에 통계학적으로 유의하며, 알긴산을 이식재와 함께 처리한 경우에 신생골 형성의 양적, 질적 개선에 도움을 줄 수 있을 것으로 사료된다.$1^{\circ}C$ 냉수로 세척하고 PETE tray로 포장하여 $4^{\circ}C$로 저장한 경우 깻잎 고유의 초록색과 향을 유지하고 있어 저온냉수 세척과 tray 포장이 세척 청경채의 선도 유지에 효과가 있는 것으로 나타났다.1%,\;pendimethalin\;1.3{\sim}2.9%$ 및 $3.8{\sim}10.8%,\;ethoprophos\;0.6{\sim}2.7%$ 및 $0.1{\sim}0.3%$이었다. 인공강우실험 후 공약의 토심별 분포를 살펴 본 결과 alachlor와 ethopropho는 토심 $10{\sim}15cm$까지 이동하였고, ethalfluralin과 pendimethalin는 대부분 토심 5 cm 이내에 잔류하였다. 경사도 30%의 경우가 10%에 비하여 각 농약의 유실량이 $0.2{\sim}1.9$ 배 증가하였는데 유출수에 의한 농약의 유실량 차이는 유출수 중 농도 차이로 판단되며, 유실토양에 의한 농약 유실량 차이는 토양 유실량과 관계되는 것으로 생각되었다. 농약의 강우에 의한 유실은 복잡하게 작용하는 많은 환경적 요인에 의하여 영향을 받지만 정교하게 구성된 환경 시나리오에 의하여 예측 가능할 것으로 판단되었다.고 도라지는 물에 우려 푹 삶았고, 감자, 송이 등은 잘게 썰어 쌀과 함께 밥을 조리하였다. 4. 약선 음식조리방법 약선음식의 재료는 평상시 식생활에 사용되고 있던 식품들의 기능성분과 약이성을 이용하여 만성적인 질병과 급성적인 복통 설사 등에 재료의 전처리를 통해 죽으로 많이 이용하였다. 특히 곡류 등은