• Journal of the Korea Concrete Institute
• /
• v.26 no.4
• /
• pp.457-463
• /
• 2014

The permitted limit, ${\pm}12%$, of the change in solid contents based on ASTM C 494 as an interim standard in Korea Expressway Corporation, can not reflect the kind of chemical admixture and the characteristics of solid content so that it differed depending on the admixture types. In this study, effect of cement concrete quality was investigated by solid changes which can be used chemical admixtures acceptance criteria. As a result of an evaluation of a change in the quality of concrete due to solid content, since Ligno-sulfonate based (LG) had a low water reducing ratio, the range of the change in solid content was great while Naphthalene sulfonated based (PNS) and Poly-carboxylate based (PC) High Range Water-reducing Admixtures (HRWR) had a high water reducing ratio, the permitted limit of the difference in solid content currently used as the acceptance criterion should be readjusted. As a result, it is found that the acceptable range must be managed within 10% and 5% when the solid contents less than 25% and more than 25%, respectively.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.4
• /
• pp.84-90
• /
• 2013

In this study we propose an effective method, Coating processing methods, which can improve the quality of recycled aggregate relatively easily without new equipment investment and complex treatment process and verify the improved effect using the devised method, Coating processing methods. To attain the research aim we used adequately diluted silicate solution for coating and carried out several property valuation for twelve types of material with different coating method. Also we formed concrete with coated aggregates which showed the best property. In conclusion the aggregates with the method of repeated impregnation in the silicate and drying showed the most excellent quality while other coating methods also resulted in an improvement of aggregate quality but failed to meet the KS Standard. Lastly with the optimal material we could obtain the approved compressive strength from the concrete allowing it to be utilized for road facility of which standard compressive strength of design is under 24MPa.

• Fire Science and Engineering
• /
• v.24 no.2
• /
• pp.126-132
• /
• 2010

The Housing Performance Rating System, enacted on 9 January 2006, an active measure containing provisions on improved quality and advanced performance of the Fire-Protection System for equalized ability to secure safety of life to some extent, is a desirable policy in fire-safety regard. The study of theoretical background of each performance rating section for the purpose of active and wide application of The Fire-Protection System category of the Housing Performance Rating System currently in effect internally. In accordance with the result of the study, the reform measures for the currently detailed evaluation criteria have been suggested to improve the performance of the Fire-Protection area of The Housing Performance Rating System currently being in force based on the assumption of prior settlement of the following; upward settlement of the point distribution standards on the performance ratings of each head backed up by an institutional Government policy with overriding priority; and urgently enacted Fire-Protection related laws and regulations.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.1
• /
• pp.64-71
• /
• 2020

The purpose of this study was to evaluate the North Korea cement industry and technology status by comparing and analyzing the cement standards and properties of South and North Korea. In the literature study, data on North Korea's cement industry and standards were collected and analyzed through the Ministry of Unification's North Korea Data Center and other agency. The facilities, classification, and quality standards of South and North Korea cements were compared. In an experimental study, a survey on the quality of cement in North Korea was carried out through physical and chemical analysis experiments by obtaining a small amount of cement from North Korea, and compared with domestic cement. As a result, North Korea cement was of lower quality than South Korean cements. North Korea cement had lower C₃S and higher C₂S than South Korea cement, especially the residue content was much higher. In addition, North Korea cement had about 50% of the compressive strength of cement in South Korea because the clinker was not fired at a sufficient temperature due to the poor performance of the cement facilities in North Korea.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.4
• /
• pp.824-835
• /
• 2016

Although the number of registered cars in South Korea is above 21million and one family has about 1.07 cars, there is no national standard for automobile reference fuel in South Korea. Reference fuel is the fuel used for certificating vehicle performance, emissions and fuel economy. Now, domestic market fuels are used as reference fuel. However, the quality of domestic market fuel is constantly changing by seasonal and fuel manufacturers. It may effect vehicle performance, emissions and fuel efficiency test result. On this study, market fuel quality was monitored and reference fuel standard(draft) was set by reflecting market fuel monitoring result. Reference fuel standard(draft) was applied to GDI and MPI engine. As a result, the difference of fuel economy between fuels meeting the reference fuel standards(draft) was reduced to 1.1% while the difference of fuel economy between market fuels was 3.8%.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.9
• /
• pp.689-699
• /
• 2013

During extreme ionospheric storms, anomalous ionospheric delays and gradients could cause potential integrity threats to users of GNSS (Global Navigation Satellite System) augmentation systems. GNSS augmentation ground facilities must monitor these ionospheric anomalies defined by a threat model and alarm the users of safely-of-life applications within time-to-alerts. Because the ionospheric anomaly threat model is developed using data collected from GNSS reference stations, the use of poor-quality data can degrade the performance of the threat model. As the total number of stations increases, the number of station with poor GNSS data quality also increases. This paper analyzes the quality of data collected from Korean GPS reference stations using comprehensive GNSS data quality check algorithms. The results show that the range of good and poor qualities varies noticeably for each quality parameter. Especially erroneous ionospheric delay and gradients estimates are produced due to poor quality data. The results obtained in this study should be a basis for determining GPS data quality criteria in the development of ionospheric threat models.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.6
• /
• pp.585-596
• /
• 2022

The purpose of this study is to propose an assessment method to analyze clay collectively referred to as fine particles of clay components contained in fine aggregates, and to propose quality standards for clay use through correlation with the performance of concrete to verify the properties of clay measured according to the method. As a result, it is analyzed that it will be suitably utilized as a method to assess the fine particles of the clay component of fine aggregates through the component analysis of XRF. Regarding the related quality standards, considering the error rate of about 10% of KCS 14 20 10, the related quality standards were analyzed to be safe when Al₂O₃+Fe₂O₃+MgO is 23.5% or less and SiO₂+K₂OSiO₂+K2₂O is 66.5% or more. To build on this study, it is expected that a comprehensive review will be conducted through additional follow-up studies such as on clay of coarse aggregates and durability analysis to establish a system for quality control of the soil fraction of aggregates.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.270-278
• /
• 2022

This study was conducted using deep learning technology to classify for 'Mihwang' peach maturity with RGB images and fruit quality attributes during fruit development and maturation periods. The 730 images of peach were used in the training data set and validation data set at a ratio of 8:2. The remains of 170 images were used to test the deep learning models. In this study, among the fruit quality attributes, firmness, Hue value, and a^* value were adapted to the index with maturity classification, such as immature, mature, and over mature fruit. This study used the CNN (Convolutional Neural Networks) models for image classification; VGG16 and InceptionV3 of GoogLeNet. The performance results show 87.1% and 83.6% with Hue left value in VGG16 and InceptionV3, respectively. In contrast, the performance results show 72.2% and 76.9% with firmness in VGG16 and InceptionV3, respectively. The loss rate shows 54.3% and 62.1% with firmness in VGG16 and InceptionV3, respectively. It considers increasing for adapting a field utilization with firmness index in peach.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.213-214
• /
• 2008

이종망 핸드오버시 동종망 핸드오버를 저해하지 않고 시행하는 방안을 제안하였다. 해당 방법은 동종망의 인접기지국을 이용한 임계조건만을 적용하는 것으로 불필요한 핸드오버가 발생하는 경우를 제한하여 저전력 구동 기반으로 동작하기 적합하며 핸드오버 정책 등에서 적용할 수 있도록 기준 성능을 조건으로 이용하는 핸드오버를 제공할 수 있다. 해당방법의 적용으로 무선망의 경계지역을 구분하는 핸드오버 제공이 가능하고 잦은 핸드오버 발생을 억제하는 신뢰성 있는 서비스 품질을 기대할 수 있다.

• Annual Conference on Human and Language Technology
• /
• 2023.10a
• /
• pp.131-136
• /
• 2023

본 논문에서는 기존의 요약 태스크에서 주로 사용하는 인코더-디코더 모델과 디코더 기반의 언어 모델의 성능을 비교한다. 요약 태스크를 평가하는 주요한 평가 지표인 ROUGE 점수의 경우, 정답 요약문과 모델이 생성한 요약문 간의 겹치는 단어를 기준으로 평가한다. 따라서, 추상적인 요약문을 생성하는 언어 모델의 경우 인코더-디코더 모델에 비해 낮은 ROUGE 점수가 측정되는 경향이 있다. 또한, 최근 연구에서 정답 요약문 자체의 낮은 품질에 대한 문제가 되었고, 이는 곧 ROUGE 점수로 모델이 생성하는 요약문을 평가하는 것에 대한 신뢰도 저하로 이어진다. 따라서, 본 논문에서는 언어 모델의 요약 성능을 보다 다양한 관점에서 평가하여 언어 모델이 기존의 인코더-디코더 모델보다 좋은 요약문을 생성한다는 것을 보인다.