• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.3
• /
• pp.207-215
• /
• 1989

In this Paper prestnting an extended timed Petri net model which Can be used for the performance analysis of Distributed System. An analysis methodology based on a reachiabilitylike approach is prestented efficiency to find out the behaviour of these nets in terms of performance. And the proposed extended timed prtri net models are simulated to show practicability of the accuracy of the extended model in representing system specification.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.11a
• /
• pp.1651-1654
• /
• 2010

본 논문은 서버의 3D SW를 클라이언트에 서비스로 제공함에 있어서 실제 실행은 서버에서 이루어지지만 3D 렌더링과 결과 화면은 클라이언트의 GPU로 처리하여 표시하는 GPU 가상화 기반 3D 원격 렌더링 시스템을 설계하고 구현한 것이다. 3D 렌더링에 클라이언트의 GPU를 이용함으로써 클라이언트 수에 비례한 서버의 성능 저하 문제를 해결할 수 있으며, 클라이언트의 GPU 성능을 충분히 이용하면서 서버의 SW를 서비스 받을 수 있는 장점을 가진다.

• Progress in Medical Physics
• /
• v.18 no.2
• /
• pp.98-106
• /
• 2007

In June 2005, Yonsei University Medical Center, Severance Hospital upgraded a full-PACS system by adding twenty (5 mega pixels) Totoku ME511L flat panel LCD display devices for diagnostic interpretation purposes. Here we report upon the quantitative (or visual) acceptance testing of the twenty Totoku ME511L display devices for reflection, luminance response, luminance spatial dependency, resolution, noise, veiling glare, and display chromaticity based on AAPM TG 18 report. The tools used in the tests included a telescopic photometer, which was used as a colorimeter, illuminance meter, light sources for reflection assessment, light-blocking devices, and digital TG18 test patterns. For selected 8 flat panel displays, mean diffuse reflection coefficient ($R_d$) was $0.019{\pm}0.02sr^{-1}$. In the luminance response test, luminance ratio (LR), maximum luminance difference ($L_{max}$), and deviation of contrast response were $550{\pm}100,\;2.0{\pm}1.9%\;and\;5.8{\pm}1.8%$, respectively. In the luminance uniformity test, maximum luminance deviation was $14.3{\pm}5.5%$ for the 10% luminance of the TG18-UNL10 test pattern. In the resolution test with luminance measurement method, percent luminance (${\Dalta}L$) at the center was $0.94{\pm}0.64%$. In all cases of noise testing, rectangular target In every square in the three quadrants was visible and all 15 targets except the smallest one in the every corner pattern and the center pattern. The glare ratio (GR) was $12,346{\pm}1,995$. The color uniformity, (u',v'), was $0.0025{\pm}0.0008$. Also, the research results of qualify control guideline of primary disply devices suitable for domestic circumstance are presented All test results are in-line with the criteria recommended by AAPM TG18 report and are thus fully acceptable for diagnostic image interpretation. As a result, the acceptance testing schedule described provides not only an acceptance standard but also guidelines for quality control, optimized viewing conditions, and a means for determining the upgrading time of LCD display devices for diagnostic interpretation.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.13 no.1
• /
• pp.55-61
• /
• 2015

When a radiation detector is applied to the measurement of the radioactivity of high-level of radioactive materials or the rapid response to the nuclear accident, several collimators with the different inner radii should be prepared according to the level of dose rate. This makes the in-situ measurement impractical, because of the heavy weight of the collimator. In this study, an IRIS collimator was developed so as to have a function of controlling the inner radius, with the same method used in optical camera, to vary the attenuation ratio of radiation. The shutter was made to have the double tungsten layers with different phase angles to prevent the radiation from penetrating owing to the mechanical tolerance. The performance evaluation through the MCNP code was conducted by calculating the attenuation ratio according to the inner radius of the collimator. The attenuation ratio was marked on the outer scale ring of the collimator. It is expected that when a radiation detector with the IRIS collimator is used for the in-situ measurement, it can change the attenuation ratio of the incident photon to the detector without replacing the collimator.

• International Journal of Highway Engineering
• /
• v.14 no.3
• /
• pp.131-140
• /
• 2012

Lane markings such as edgelines, centerlines, and lines that delineate lanes generally provide drivers with the various information for safe driving. Drivers can easily recognize the lane markings through the color differences between the markings and road surfaces during the daytime. However, it is a bit difficult for drivers to perceive them during the nighttime due to the lack of artificial lights. Although the glass beads with the 1.5-refractive index have been used to improve the visibility of the lane markings during the nighttime, it is still difficult for drivers to recognize the lane markings properly, especially during the rainy nighttime, which may often lead to traffic accidents. To improve the retroreflectivity and visibility of the lane markings during the rainy nighttime, the high refractive beads with the 2.4-refractive index are essentially required, but they do not work appropriately during the dry nighttime. Thus, the mixed materials with the 1.5, 1.9, and 2.4-refractive beads should be considered for the satisfactory implementation of the lane markings. This study reveals the best mixing rates of the beads by conducting benefit-cost analysis under various weather conditions in Korea. The analysis results show that the lane markings with the 100% of the 2.4-refractive beads provide the highest visibility of lane markings regardless of the roadway conditions, but the benefit-cost (B/C) ratio of the bead mixture is merely 0.46. The best mixing rate of the beads, from the highest B/C ratio viewpoint, was identified as the mixture with a 80% of 1.5-refractive beads and a 20% of 2.4-refractive beads. Some limitations and future research agenda have also been discussed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.7-13
• /
• 2019

Unlike a typical video wall system, video wall systems used for integrated monitoring in smart city environments should be able to display various videos, images, and texts simultaneously. In this paper, we propose an Internet Protocol (IP)-based video wall system that has no limit on the number of videos that can be monitored simultaneously, and that can arrange the monitor screen layout without restrictions. The proposed system is composed of multiple display servers, a wall controller, and video source providers, and they communicate with each other through an IP network. Since the display server receives and decodes the video stream directly from the video source devices, and displays it on the attached monitor screens, more videos can be simultaneously displayed on the entire video wall. When one video is displayed over several screens attached to multiple display servers, only one display server receives the video stream and transmits it to the other display servers by using IP multicast communications, thereby reducing the network load and synchronizing the video frames. Experiments show that as the number of videos increases, a system consisting of more display servers shows better decoding and rendering performance, and there is no performance degradation, even if the display server continues to be expanded.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.3
• /
• pp.656-663
• /
• 1990

To investigate the optimum design conditions of Stirling Engines at the preliminary design stage, comparative study between adoabatoc analysis based on an approximate analytical solution to the Ideal Adiabatic Model and the existing isothermal analysis has been carried out. The optimum phase angle obtained from adiabatic analysis to achieve the maximum work with given combination of design parameters is greater than that from isothermal analysis, while the optimum swept volume ratio is smaller. Effect of variation in the temperature ratio on the work parameter is proved to be stronger in adiabatic analysis. On the contrary, the work parameter by adiabatic analysis is less sensitive to a change in the dead volume ratio. Especially in adiabatic analysis there exists the optimum dead volume ratio maximizing the work parameter, which may provide a lower limit of it. Considering that the adiabatic model is more reasonable, signifiant differences between two methods lead to the conclusion that adiabatic analysis is preferable to isothermal one for the preliminary design of Stirling Engines.

• Journal of the Korean housing association
• /
• v.20 no.6
• /
• pp.57-65
• /
• 2009

In Korea, Housing Performance Rating Indication System was first adopted in 2006. Main purpose of the System is on developing criteria which can systematically measure the level of housing performance. Among the five categories of Housing Performance Rating Indication System, Repair Convenience is closely related to Remodeling which has been widely recognized as an alternative to the building reconstruction. Especially, as the actual housing supply level in Korea is reaching almost 100%, it is crucial to expand Long-life Housing through the effective maintenance and management. In addition, consumers should have an access to the performance ratings of apartment buildings on which they can rely on in choosing their own housings. And for construction companies, a performance code enacted by government will provide them with a standard that they can utilize in determining performance level of buildings that they build. This study examines data which has been obtained from the recent application of Housing Performance Rating Indication System and Repair Convenience category is main concern. Findings from the study will provide vital information in improving current Housing Performance Rating Indication System.

• Journal of the Korean housing association
• /
• v.20 no.6
• /
• pp.47-56
• /
• 2009

Housing Performance Rating Indication System was started in 2006. The aim of Housing Performance Rating Indication is to provide the guideline of housing performance. Repair Convenience is similar to Remodeling. Remodeling has been paid more attention as an alternative for reconstruction. Especially, now the actual house supply is facing almost 100%, it is time to keep and maintenance management of apartment buildings, and ultimately it will expand the Long life housing. Especially consumers has to have a right to select apartment buildings by comparing performance of house. For construction companies, they need a performance code that standardized by government, so they can provide a Certain performing house. This study examines data which has been obtained from the recent application of Housing Performance Rating Indication System and Repair Convenience category is main concern. Findings from the study will provide vital information in improving current Housing Performance Rating Indication System.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.10 no.4
• /
• pp.53-61
• /
• 1996

A distribution photometer was constructed to measure the angular distribution of luminous intensity of light sources and the reflected luminance of retroreflectors. This system incorporates a goniometer to rotate test light source(360 degree in yaw rotation and $\pm$30 degree in pictch rotation), a photomultiplier tube as light detector, light projector for retroreflection measurements, and the control and display unit. The ranges of luminous Intensity measurements and observation angles are 0.01~199900 cd and 0.2~1.5 degree respectively. The uncertainty of luminous intensity measurements is $\pm$3%. This paper describes the construction of the distribution photometer and the performance characteristics.