• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.5
• /
• pp.462-468
• /
• 2017

In this paper IoT/WSN(Internet of Things/Wireless Sensor Network) has been modeled with a random geometric graph. And a performance of the decentralized code for the efficient storage of data which is generated from WSN has been analyzed. WSN with n=100 or 200 has been modeled as a random geometric graph and has been simulated for their performance analysis. When the number of the total nodes of WSN is n=100 or 200, the successful decoding probability as decoding ratio ${\eta}$ depends more on the number of source nodes k rather than the number of nodes n. Especially, from the simulation results we can see that the successful decoding rate depends greatly on k value than n value and the successful decoding rate was above 70% when $${\eta}{\leq_-}2.0$$. We showed that the number of operations of BP(belief propagation) decoding scheme increased exponentially with k value from the simulation of the number of operations as a ${\eta}$. This is probably because the length of the LT code becomes longer as the number of source nodes increases and thus the decoding computation amount increases greatly.

• Journal of Technology Innovation
• /
• v.18 no.2
• /
• pp.253-288
• /
• 2010

Production innovation capabilities are critical to the survival and growth of firms. This paper investigates industrial dynamics and dynamic capabilities of firms by looking at how an industry evolution process influences firms' product innovation strategy and how dynamic capabilities affect firms' product innovation process. Korea Wireless Internet industry shows a full cycle of industry evolution process including introduction phase, growth phase, maturity phase, and decline phase using by dynamic technological and market changes. 7 listed companies in Korea Wireless Internet industry were selected. We have conducted multiple case studies based upon in depth interviews. Empirical results show that different phases of industry evolution influence firms' strategy of product innovation. Dynamic capabilities are also appears to be very important to the survival and growth of a firm.

• KSBB Journal
• /
• v.20 no.4
• /
• pp.323-327
• /
• 2005

RT-PCR is an useful method to investigate the expression of target gene as detection tools. Although RT-PCR is the powerful detection method for tissues, it was difficult to amplify the target gene product using the single cell. To clarify the expression level of the genes related to Parkinson's disease (PD), I performed the laser dissection of single cell from Substantia nigra. I examined the mRNA expression level in the dopaminergic neuron isolated from the PD patients by the single cell RT-PCR method. It is known that tyrosine hydroxylase (TH), DOPA decarboxylase (DDC) are involved in biosynthesis of the catecholamine such as dopamine. Little has been known about the gene expression features of these enzymes in single dopaminergic neuron. I could detect the specific gene products in single cell level. The different expression was observed in PD-related gene products from the single neuron of PD patients. Interestingly, TH gene expression was significantly decreased with comparing the ratio of decrease in other PD-related genes. Hence, I represented data that indicate the RT-PCR method described in this report is an effective method in detecting a specific single-cell mRNA level related with diseases.

• Journal of Convergence Society for SMB
• /
• v.1 no.1
• /
• pp.1-8
• /
• 2011

With a sample of 147 Korean small and medium size companies, this study examined the relationships among degree of information orientation, corporate culture, degree of information management implementation and selected business performances in the process of implementing IMS(Information Management System). Information orientation is defined as company-wide understanding and implementation of the underlying philosophy, principles, approached, and tools of information improvement programs. It is assumed that successful implementation of information improvement programs requires a information-oriented mind-set of the employees. It is also assumed that successful implementation of information improvement programs require strong support from s corporate culture that emphasizes continues improvement. Adopting the competing values model of Quinn and McGrath(1985), corporate culture is classified into 'flexible' versus 'controlled culture' and 'outer-directed' versus 'inner-directed culture'. This study examined how such fitness influenced the implementation of information innovation programs and business performance. Implementation of information innovation programs was measured through various factors, such as leadership, strategic information planning, human resources focus, customer and market focus, process management, and information analysis and application. Business performance was measured through non-financial performance measuresm such as employee results, process results, information results, and customer results, and through perceived financial performance measures.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.5_6
• /
• pp.273-279
• /
• 2003

Hypercube multicomputers have been drawing considerable attention from many researchers due to their regular structure and short diameter. One of keys to the performance of Hypercube is the efficiency of communication among processors. Among several communication patterns, multicast is important, which is found in a variety of applications as data replication and signal processing. As the number of processors increases, the probability of occurrences of fault components also increases. So it would be desirable to design an efficient scheme that multicasts messages in the presence of faulty component. In fault-tolerant routing and multicast, there are local information based scheme, global information based scheme and limited information based scheme in terms of information. In general, limited information is easy to obtain and maintain by compressing information in a concise format. In this paper, we propose a new routing scheme and a new multicast scheme using recently proposed fully reachability information scheme and new local information scheme. The proposed multicast scheme increases multicast success possibility and reduce deroute cases. Experiments show that multicast success possibility can increase at least 15% compared to previous method.

• Journal of Korean Society of Forest Science
• /
• v.101 no.1
• /
• pp.77-82
• /
• 2012

Sterilization of oak sawdust at $65^{\circ}C$ for Lentinula edodes bed cultivation can be efficient in sterilization facility cost, but its effect on the mushroom production is uncertain due to high contamination probability. The effective conditions for L. edodes hyphal growth in the low temperature sterilized oak sawdust were investigated with combinations of three sterilization temperatures ($65^{\circ}C$, $100^{\circ}C$ and $121^{\circ}C$) and four cultivation temperatures ($15^{\circ}C$, $20^{\circ}C$, $25^{\circ}C$, and $30^{\circ}C$). L. edodes inoculation density effect was also tested with 1 cm, 2 cm, and 4 cm distance in the sawdust (4%, 11% and 25% inoculation rate by surface area). L. edodes hyphal growth in the sawdust sterilized at $65^{\circ}C$ was as much as at those $100^{\circ}C$ and $121^{\circ}C$ when the fungus cultured below $25^{\circ}C$, but it was greatly reduced when cultured at $30^{\circ}C$. And the sawdust medium with 1cm distance inoculation density was fully occupied with L. edodes hyphae, but those with 2~4cm distance inoculation were contaminated by 4~33%. Therefore, we conclude that low temperature sterilized oak sawdust needs to be cultured under $25^{\circ}C$ after sufficient inoculation by 25% for successful bed cultivation of L. edodes.

• Fire Science and Engineering
• /
• v.31 no.5
• /
• pp.78-86
• /
• 2017

Disasters in South Korea are taking on more diverse and intricate aspects than before, while being affected by the industrial development and deterioration of the cities. Therefore, it is urgently needed for success in disaster countermeasures to secure emergency communications operating system which would make it possible to share various information between the control tower and field personnel quickly and accurately. This study proposes a method of improving the national emergency communications operating system based on the Federal disaster management system, emergency communications system, and Standard Operating Procedures (SOPs) employed in the US, which is the leading country in the field of disaster management. First, the organization of the emergency communications needs to be more systematized than in the past. The organization of the emergency communications of the central and local governments have to be administered according to their different roles and objectives. Furthermore, they must cooperate with each other based on interoperability. Second, emergency communications councils need to be established, composed of representatives related to disasters, and national and regional units need to be formed and operated separately. Third, the SOPs should not only cover both the operational and technical elements, but also assign the roles and responsibilities to the members of the disaster communications system. These improvements will assure the correct functioning of the disaster communications system in the field, which is expected to increase the probability of success in disaster countermeasures.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.4
• /
• pp.44-49
• /
• 2023

In the global pursuit of carbon neutrality, the rapid increase in the adoption of electric vehicles (EVs) has led to a corresponding surge in the demand for batteries. To achieve high efficiency in electric vehicles, considerations of weight reduction and battery safety have become crucial factors. Copper and aluminum, both recognized as lightweight materials, can be effectively joined through laser welding. However, due to the distinct physical characteristics of these two materials, the process of joining them poses technical challenges. This study focuses on conducting simulations to identify the optimal laser parameters for welding copper and aluminum, with the aim of streamlining the welding process. Additionally, a Graphic User Interface (GUI) program has been developed using the Python language to visually present the results. Using machine learning image data, this program is anticipated to predict joint success and serve as a guide for safe and efficient laser welding. It is expected to contribute to the safety and efficiency of the electric vehicle battery assembly process.

• The Korean Journal of Applied Statistics
• /
• v.22 no.2
• /
• pp.271-280
• /
• 2009

For bivariate binomial data with both intra and inter-class correlation, Danaher and Hardie (2005) proposed a bivariate beta-binomial model. However, the model is limited to the situation where the intra-class correlation is strictly positive. Thus it might be seriously inadequate for data with a negative intra-class correlation. Several authors have considered generalized binomial distributions covering a wider range of intra-class correlation which could relax the possible model restrictions imposed. Among others there are the additive/multiplicative and the beta/extended beta binomial model. In this study, bivariate models of the Sarmanov (1966) type are formed by combining each of those univariate models to take care of the inter-class correlation, and are evaluated in terms of the goodness-of-fit. As a result, B-mB and B-ebB are fitted, successfully, to real data and that B-mB, which has a wider permissible range than B-ebB for the intra-class correlation is relatively preferred.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.1A
• /
• pp.67-72
• /
• 2011

There are lots of researches for mobility of MS(mobile station) in All IP based network. Specially, NEMO(NEwork MObility) is not supporting mobility of each MS but supporting mobility of network that include group of MS. Some research try to overcome limitation of wireless with the protocol in wired state and it maintains the performance such as wire environment. There are no researches about multicast with reliability in NEMO. Therefore, this paper suggests efficient algorithm to solve problems when RMTP(Reliable Multicast Transport Protocol) apply to NEMO environment to support high reliability with multicast. And this paper shows the better performance of proposed algorithm for delay and transmission rate between AR and TLMR comparing with RMTP in NEMO.