• Journal of Korean Society of Forest Science
• /
• v.104 no.4
• /
• pp.564-577
• /
• 2015

The objectives of this study were to investigate the possibility of establishing a tree nursery at Saemangeum reclaimed land and to classify landscape trees based on the salt tolerance. A tree nursery (2.0 ha) was made in Gunsan Okgu area in 2012 with underground drain lines on the reclaimed land established in 2010. Salt content of the nursery soil within the 60 cm depth in 2013 was 5.13 dS/m and 8.20 dS/m for the pre-desalinated and non-desalinated lands, respectively. Thirty-six woody plant species (22 tree species and 14 shrub species at ages of 1 to 4) with a total of 3,943 individuals were planted in early April, 2013 and their growth performance was monitored until September of the same year. The average survival rate of the transplanted plants was 71.4% in late September, suggesting the high possibility of establishing a tree nursery at the reclaimed land. Based on the survival rate and tree vigor (amount of healthy leaves and crown development), the following 17 species with some salt tolerance were classified into three groups: "salt tolerant group" (3 species, Tamarix chinensis, Cudrania tricuspidata, Ilex serrata), "recommended group" (5 species, Pinus thunbergii, Albizia julibrissin, Ligustrum obtusifolium, Rosa rugosa, Pleioblatus pygmaeus), "plantable group" (9 species, Zelkova serrata, Hibiscus syriacus, Elaeagnus umbellata, Sorbus alnifolia, Sophora japonica, Metasequoia glyptostroboides, Quercus acutissima, Ulmus parvifolia, Robinia pseudoacacia). Seven tree species that had been adapted to the reclaimed land for three to four years before being transplanted to new reclaimed land in Gunsan Okgu area showed average survival rate of 98%, suggesting that pre-conditioned trees would survive well in the reclaimed land.

• International Commerce and Information Review
• /
• v.15 no.4
• /
• pp.481-508
• /
• 2013

The purpose of this study is to research the specific ways of successful localization by analyzing the success and failures case for localization through the theoretical background and the strategic models of localization. The strategic models of localization are divided by management aspects such as the localization of production and sourcing, the localization of human resources, the localization of marketing, the localization of R&D, harmonious relationship with the local community and authority transfer between headquarters and local subsidiaries. And the specific measures of the successful localization are proposed within the framework of the strategic models by comparing and analyzing the success and failures case for localization of individual companies operating in Indonesia. The results indicate that there are successful companies which develop a suitable products for the local climate and failed automobile company which is weak for assembly of complete vehicle in terms of localization of production and sourcing. In case of localization of human resources, most companies recognize the importance of this part and endeavor to secure superior human resource through a related education. It is found that most of the companies perform R & D in their native country. In part of a harmonious relationship with the local community, Korean companies should contribute to the community and be friendly with local residents and make a good image of the company focusing on the cultural environment. In aspect of authority transfer between headquarters and local subsidiaries, there is a tendency to be determined by the head office rather than the joint participation. In the future, in order for Korean enterprise to be successful one in Indonesia market, a highly interdependent and complex forms between headquarters and local subsidiaries shall be performed and an active exchange of information and the selection of best talent regardless of nationality shall be promoted.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.17 no.1
• /
• pp.43-54
• /
• 1989

In recent years plants have increasingly become in inferior part of the interior designing of large buildings. In 28 large buildings selected at random in Seoul City have been subjected to studies on utilization status of fille interior landscape plants. The results obtained were as follows. 1. Plant class found in Interior of large buildings were 59 class, especially Dracaena were the most predominent plants among them, and then comes Monstera, Phiodendron, Schefflera, and Washingtonia in that order. 2. The most abundant ornamental plant cultivars were Monstera adansoii(Monstera perutusa cv.), and then comes Schefflera arboricora(Schefflera Hong Kong cv.), Washingionia rubusta (Washingtonia palm). Rhapis excelsa, and Diffenbachia(Hawaii Snow cv.) in that order. 3. Foliage plants among the interior landscape plants showed 99.5 percent and Woody plants and Bonsai plants showed each 0.4, 0.1 percent. 4. Climbing foliage plants found in 28 large building observed For the present study were 9 cultivar, and the most abundant plants were Hedera (pittsburgh cv.) and Epipremnum (Marble Queen cv.) pl anted to clustered planting. 5. A majority of plants used to plastic pot, and most of 71an1s place on the floor. 6. Height of plants ranging less then 50cm were more frequently found, but ranging from 50cm to 2.0m were 4.3 percent and the most predominent height of plants were Canariensis showed 4m in the large buildings. 7. Interior light intensity in large building were shortage, therefore artificial lamp for formal growing needed to be equipped. 8. Purpose growth of interior plants were to in order visitors. 9. 7he superintendents prefered to used pot-stand. 10. The most important environment factor for plant growing were light, humidity, and water.

• Journal of dental hygiene science
• /
• v.10 no.4
• /
• pp.265-271
• /
• 2010

This study was to investigate the level of knowledge, recognition, behavior of radiographic safety control and job stress in dental hygienists and to determine the relationship among variables. The subjects were 256(56.9%), who were worked in dental hospital and clinic with mean age of $29.59{\pm}7.30$. Data was collected using a self administrated questionnaire from April 4 to May 15, 2010. Behavior of radiographic safety control was measured using the 15-items and job stress was measured using the 5-items with 5-point likert scale. The data were analyzed with t-test, one-way ANOVA and pearson correlation coefficient using the SPSS WIN 17.0 program. Regarding job stress, the subjects was a mean of 2.63 out of a maximum 5 points. The level of knowledge, recognition, behavior of radiographic safety control a mean of 3.11, 4.08 and 3.43 out of a maximum 5 points. Recognition and behavior of radiographic safety control was negative related job stress in this study. Based on the findings, behavior of radiographic safety control is associated with job stress. These results suggest that various program should be considered for radiation safety control of dental hygienists.

• Progress in Medical Physics
• /
• v.13 no.3
• /
• pp.149-155
• /
• 2002

Recent advances in radiation transport algorithms, computer hardware performance, and parallel computing make the clinical use of Monte Carlo based dose calculations possible. To compare the speed and accuracies of dose calculations between different developed codes, a benchmark tests were proposed at the XIIth ICCR (International Conference on the use of Computers in Radiation Therapy, Heidelberg, Germany 2000). A Monte Carlo treatment planning comprised of 28 various Intel Pentium CPUs was implemented for routine clinical use. The purpose of this study was to evaluate the performance of our system using the above benchmark tests. The benchmark procedures are comprised of three parts. a) speed of photon beams dose calculation inside a given phantom of 30.5 cm$\times$39.5 cm $\times$ 30 cm deep and filled with 5 ㎣ voxels within 2% statistical uncertainty. b) speed of electron beams dose calculation inside the same phantom as that of the photon beams. c) accuracy of photon and electron beam calculation inside heterogeneous slab phantom compared with the reference results of EGS4/PRESTA calculation. As results of the speed benchmark tests, it took 5.5 minutes to achieve less than 2% statistical uncertainty for 18 MV photon beams. Though the net calculation for electron beams was an order of faster than the photon beam, the overall calculation time was similar to that of photon beam case due to the overhead time to maintain parallel processing. Since our Monte Carlo code is EGSnrc, which is an improved version of EGS4, the accuracy tests of our system showed, as expected, very good agreement with the reference data. In conclusion, our Monte Carlo treatment planning system shows clinically meaningful results. Though other more efficient codes are developed such like MCDOSE and VMC＋＋, BEAMnrc based on EGSnrc code system may be used for routine clinical Monte Carlo treatment planning in conjunction with clustering technique.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.14 no.1
• /
• pp.19-27
• /
• 2012

The open-top chamber (OTC) system is designed for long term studies on the climate change impact on the major tree species and their community in Korea. In Korea Forest Research Institute (KFRI), the modified OTC system has been operating since September 2009. The OTC facility consists of six decagon chambers (10 meters in diameter by 7 meters high) with controlled gas concentration. In each chamber, a series of vertical vent pipes are installed to disperse carbon dioxide or normal air into the center of the chamber. The OTC is equipped with remote controlled computer system in order to maintain a stable and elevated concentration of carbon dioxide in the chamber throughout the experimental period. The experiment consisted of 4 treatments: two elevated $CO_2$ levels ($1.4{\times}$ and $1.8{\times}$ ambient $CO_2$) and two controls (inside and outdoors of the OTC). Average operational rate was the lowest (94.2%) in June 2010 but increased to 98% in July 2010 and was 100% during January to December 2011. In 2010~2011, $CO_2$ concentrations inside the OTCs reached the target programmed values, and have been maintained stable in 2011. In 2011, $CO_2$ concentrations of 106%, 100% and 94% of target values has been recorded in control OTC, $1.4{\times}$ $CO_2$-enriched OTC and $1.8{\times}$ $CO_2$-enriched OTC, respectively. With all OTC chambers, the difference between outside and inside temperatures was the highest ($1.2{\sim}2.0^{\circ}C$) at 10 am to 2 pm. Temperature difference between six OTC chambers was not detected. The relative humidity inside and outside the chambers was the same, with minor variations (0~1%). The system required the highest amount of $CO_2$ for operation in June, and consumed 11.33 and 17.04 ton in June 2010 and 2011, respectively.

• KEPCO Journal on Electric Power and Energy
• /
• v.1 no.1
• /
• pp.39-46
• /
• 2015

A outdoor termination installed at the outdoor substation is required to connect undergroud cables and overhead transmission lines. The joint box for AC transmission system is already developed and widely used to interconnect overhead and undergroud systems. But the development of the joint box for DC transmission system was only introduced from China and Japan, but theire developemnt staus and core technologies were not fully reported. In order to implement HVDC systems connecting ovehead transmission lines and undergroud cables, a outdoor termination should be developed, but the detailed specifications and information of this device were not reported. It is estimated that the development of the joint box for DC environment has some technical obstacles including insulating materials, electric field mitigation, thermal temperature rise, and space charge accumuations. Among this, the most important one is the DC elctrical insualtion design. Therefore, in order to investigate the DC elctrical insualton design of outdoor termination, the design of AC slip-on type outdoor termination is reffered, and DC electric field analysis performed to verify the possiblity of application of AC joint box into DC joint box. Especially for DC electric field analysis, temperature rise of insualting materials of a joint box was considered, because the conductivity of materials could be changed due to temperature rise. Furthermore, DC electric field analysis considering transinet state, and polarity reversal state were also investigated to verify which state is the most severe condition for the DC joint box. From the simualtion resulsts, it was shown that the value and the position of maximum electric field was obtained comparing AC state, DC state without temperaure rise, and DC state with temperaure rise. And it was confimred that severe DC electric field was observed considing temperaure rise. Finally, in order to reduce DC eletric field intensifation, different configuration of the joint box was applied and it was not possible to obtain satisfactory results. It means that the slight change of configuration of AC joint box was not the suitable soluton for DC joint box. It is essential to establish novel DC insulaton design skills and method for DC joint box to commercialze this product in the near future.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.1
• /
• pp.120-128
• /
• 2018

The purpose of this study is to establish basic data for the continuous protection management policy of domestic natural world heritage and mixed world heritage, and to examine the present situation and characteristics of the protection management according to the World Heritage Convention on the World Heritage listed Huangshan. The results of this study are as follows. First, Huangshan began to be protected by the establishment of the Huangshan Construction Committee in 1933, and after the designation of national park in 1982, laws and regulations were established in the central ministries, And various projects related to utilization have been implemented. Secondly, the establishment of the boundary for protection was actively intervened by the central government, such as the reorganization of the boundary of Huangshan through the administrative district plan. In order to protect the ecological and landscape value as well as the cultural factor, And designated a heritage designated area. Third, the protection management of Huangshan was divided into four major stages. The first phase was divided into the period when administrative measures were taken to manage the protection of Huangshan. The second phase was designated as a national park in Huangshan. The third period was the time of the protection-oriented project according to the recommendation of the international organizations after the World Heritage listed. The fourth period was the expansion of the tourism industry for the continuous use of protection of Huangshan city, My preservation business was being implemented. Fourth, Huangshan is managed by the central government and the city government. Huangshan, which is a mixed heritage, is managed jointly by the Ministry of Cultural Heritage Administration and the Ministry of Natural Heritage Administration. The protection and management of Huangshan promoted the efficiency and expertise of the heritage-related work through the establishment of the administrative unit-specific management system, and the local governments were entrusted with the authority to implement the protection management policies that meet local characteristics. Fifth, the preservation area of Huangshan has been destroyed by the development policy centered on the mountain. In addition, according to the operation of accommodation facilities, there are problems such as sewage, garbage disposal, and environmental pollution caused by tourists, and the damage caused by pests and diseases in planted plantations around the area and changes in ecosystem due to the composition of cable cars. Sixth, for the continuous protection of Huangshan, strict regulations on new construction, extension and management of accommodation are required, and it is necessary to install facilities to limit and control the number of visitors.

• Applied Microscopy
• /
• v.37 no.1
• /
• pp.23-33
• /
• 2007

The lacrimal gland are compound tubule-acinar glands. The main lacrimal function is the production of the aqueous layer, the thickest and major constituent of the precorneal tear film. The lacrimal gland also has an important function in the defense system of the ocular surface, forming a part of the conjunctival-associated hymphoid tissue. The ultrastructural characteristics of the lacrimal gland of the rabbit were described. The lacrimal tissues of rabbits were processed through the conventional techniques for transmission electron microscopy. The secretory portions consisted of three cell types: 1. Serous cells with electron dense secretory granules. 2. Seromucous cells containing variable moderately electron dense secretory granules with flocculent material. 3. Mucous rolls containing mucous secretory granules. The serous cells were situated at the basal portion of acini, and they contained electron dense granules of variable densities and sizes. The seromucous cells contained a few protein secretory granules and more mucous secretory granules. The mucous cells contained even fewer protein secretory granules and exclusively mucous secretory granules. The epithelium of the intralobular ducts showed secretory granules, junctional complexes, and large basolateral intercellular spaces with lateral folds. These study might be helpful in determining inter-relationships, similarities and differences among the orbital glands of various physiological or pathological conditions.

• Journal of the Korean association of regional geographers
• /
• v.20 no.3
• /
• pp.282-299
• /
• 2014

Cette $\acute{e}$tude a pour objectif de d$\acute{e}$velopper le g$\acute{e}$otourisme des $\hat{i}$les de Geomun et de Baek dans le Parc Marin National de Dadohae pour conna$\hat{i}$tre les caract$\acute{e}$ristiques de cette r$\acute{e}$gion du point de vue $\acute{e}$cologique, historique et culturel $\grave{a}$ partir de ses ressources g$\acute{e}$omorphiques et g$\acute{e}$ologiques qui ont la haute de valeur $prot{\acute{e}}g{\acute{e}}e$. Il y a plusieurs ressources g$\acute{e}$omorphiques et g$\acute{e}$ologiques sur l'$\hat{i}$le de Baek: falaise; caverne marine; tafoni; le relief li$\acute{e}$ $\grave{a}$ les roches volcaniques. Il y a aussi plusieurs ressources historiques et culturels sur les $\hat{i}$les de Go et d'Est: le cimeti$\grave{a}$r d'arm$\acute{e}$e anglaise li$\acute{e}$e $\grave{a}$ l'occupation ill$\acute{e}$gale de l'$\hat{i}$le de Geomun en 1885; le site historique de Kim Ryu(金劉) qui a enseign$\acute{e}$ les disciples de confucianisme et qui a $succ{\acute{e}}d{\acute{e}}$ au Confucius; la for$\hat{e}$t de feuillus de zone $temp{\acute{e}}r{\acute{e}}e$ sur l'$\hat{i}$le d'Ouest et la ceinture de falaise sur l'$\hat{i}$le de Baek. Une route g$\acute{e}$otouristique part de l'$\hat{i}$le d'Ouest et continue $\grave{a}$ l'$\hat{i}$le d'Est: c'est la route $\acute{e}$cologique, historique et culturel sur l'$\hat{i}$le de Geomun. L'autre route continue de la c$\hat{o}$te de l'$\hat{i}$le de Baek: c'est la route de paysages g$\acute{e}$omorphiques et g$\acute{e}$ologiques. Nous proposons des plusieurs exemples pour d$\acute{e}$velopper le g$\acute{e}$otourisme des $\hat{i}$les de Geomun et de Baek: installation de centre visiteur et de panneaux d'explication g$\acute{e}$otouristique sur le g$\acute{e}$osite central ; monitoring environmental.