• Journal of the military operations research society of Korea
• /
• v.34 no.2
• /
• pp.163-174
• /
• 2008

The military is an organization where reliability and availability take much more importance than in any other organization. And, in line with a recent trend of putting emphasis on 'system readiness', not only functions but also availability of a weapon system has become one of achievement targets. In this regard, the military keeps spares for important facility and equipment, which is called as Maintenance Float (M/F), in order to enhance reliability and availability in case of an unforeseen event. The military has calculated yearly M/F requirements based on the number of equipment and utilization rate. However, this method of calculation has failed to meet the intended targets of reliability and availability due to lack of consideration on the characteristics of equipment malfunctions and maintenance unit's capability. In this research, we present an analysis model that can be used to determine an optimal M/F inventory level based on queuing and absorbed Markov chain theories. And, we applied the new analysis model to come out with an optimal volume of K-1 tank M/F for the OO division, which serves as counterattack military unit. In our view, this research is valuable because, while using more tractable methodology compared to previous research, we present a new analysis model that can describe decision making process on M/F level more satisfactorily.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.730-736
• /
• 2019

The demand for natural gas, which is considered an environmentally friendly energy source, is increasing, and at the same time, the market share of large pipelines for natural gas supply is increasing continuously. On the other hand, the corrosion of such large pipelines reduces the efficiency of natural gas transportation. Therefore, this study aims to establish a strategy for securing the patent rights of related technologies through quantitative analysis of patents on energy-independent high-efficiency corrosion prevention technology for large-scale pipelines for natural gas supply. In this patent technology trend study, Korean, US, Japanese, and European patents filed, published, and registered by June 2018 were analyzed, and a technical classification system and classification criteria were prepared through expert discussion. To use fuel cells as an external power source to prevent the corrosion of natural gas large-scale pipelines, it is believed that rights can be claimed using an energy control system and methods having 1) branch structures of pipeline and facility designs (decompressor/compressor/heat exchanger) and 2) decompression/preheating and pressurization/cooling technology of high pressure natural gas.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.961-965
• /
• 2007

현재 오염총량관리제를 시 군 단위의 기초자치 단체별로 시행하고 있는데 실제로 오염물질의 전달은 행정구역단위가 아닌 유역내에서 이루어지진다. 따라서 본 연구에서는 기초자치 단체별이 아닌 유역단위로 오염부하량과 삭감량을 산정함으로써 유역 단위의 오염총량관리제 계획 수립을 위한 토대를 제공하고자 한다. 본 연구에서는 보청천 유역을 대상으로 유역의 오염부하량을 산정하고자 하였다. 이를 위하여 지리정보시스템(GIS)인 WMS(Watershed Management System)와 ArcView를 이용하여 유역의 지형인자들을 추출하고, 각 소하천의 토지이용도와 생활계, 축산계, 양식계, 토지계를 바탕으로 원단위를 적용하여 발생부하량을 산정하였다. 그리고 각 소하천별 발생부하량 산정 결과를 토대로 각 수질관측점을 기준으로 하여 배출부하량을 산정하였으며, 배출부하량의 산정결과를 이용하여 유달부하량을 산정하였다. 이를 위해서 필요한 수질 데이터는 QUAL2E 모형을 이용하여 모의 하였으며, 수리 및 수질 매개변수를 추정하고 모형의 보정 및 검증을 수행하였다. 그 결과 유달부하량은 BOD는 2013.16kg/일, TN은 1091.34kg/일, TP은 235.16kg/일이 도출되었다. 따라서 장래에 수질이 악화될 경우를 고려하여 수질 항목별 오염량이 2배, 3배로 증가한다고 가정하였다. 오염량이 2배 증가하였을 경우, 오염부하량을 산정한 결과 보청천3 지점에서 BOD는 184.68kg/일이 삭감되어야 하고, 오염량이 3배 증가하였을 경우 BOD는 1775.69kg/일이 삭감되어야 한다는 결과를 도출할 수 있었다. 본 연구와 같이 유역단위로 오염부하량을 산정할 경우, 오염원을 줄이는데 효율적일 것으로 생각되며, 향후 오염총량관리제를 위해 유역단위의 오염부하량 산정을 고려하면 좋을 것으로 사료된다.는 지배적인 요인으로 남게 될 것이다. 본 연구에서는 현재 진행중인 승기천 오염하천 정화사업이 종료되는 시점을 기준으로 남동유수지에 대해 승기천과 연계한 유수지의 환경개선 방법을 제안하였다. 준설을 통해 유수지의 근본적인 오염원을 제거하고 남동유수지 유입부에 인공습지와 수처리설비를 설치하여 유수지의 수질을 개선하고 개선된 수질이 3급수로 유지하도록 하였으며, 설치된 인공습지에는 철새도래지를 조성하여 유수지 유입수인 철새가 날아드는 하천인 승기천의 테마와 연계하도록 하였다. 인공습지 주변으로 식생호안을 설치하고 유수지 주변에는 산책로를 설치하여 지역주민들의 친환경 수변공간으로 활용하도록 하였다. 1유수지와 연결된 2유수지는 BTL사업을 통해 주변공단으로부터의 오폐수를 원천적으로 차단하도록 하였으며 2유수지를 매립하여 지하는 강우시 유출수 저류가 가능한 화물차주차장으로 활용하고 지상은 녹지공간으로 조성하여 공단근로자 및 지역주민을 위한 휴식공간으로 활용될 수 있도록 제안하였다. 본 연구는 남동유수지 환경 개선 사업 실행을 위한 정책 연구로 연구결과를 인천시가 적극 수용하기로 결정함에 따라 인천시의 환경 현안 문제인 남동유수지의 수질개선을 통해 시민의 휴식 및 여가선용 공간으로 활용하기 위한 사업의 기초자료로 활용되며 이미 설계검토가 시작되었다. 본 연구결과는 유수지 및 저수지의 환경개선 사업의 선두적인 성공사례로 국내 타 지역의 유사한 사업에 있어 벤치마킹을 할 수 있는 훌륭한 사례가 될 것이다.요 생산이 증가하자 군신의 변별(辨別)과 사치를 이유로 강력하게 규제하여 백자의 확대와 발전에 걸림돌이 되었다. 둘째, 동기(銅器)의 대체품으로 자기를 만들어 충당해야할 강제성 당위성 상실로 인한 자기수요 감소를 초래하였을 것으로 사료된다. 셋째, 경기도 광주에서 백자관요가 운영되었으므로 지방인 상주

• Journal of Animal Environmental Science
• /
• v.15 no.1
• /
• pp.69-74
• /
• 2009

A survey questionnaire that addressed the issues to manure compost producers and users was prepared. The questionnaire addressed three main topics as follows: 1) types of manure treatment and composting facilities are being operated, 2) quantity of manure compost produced and used, 3) problems experienced in producing and using manure compost. A total of 30 manure compost producers and 10 manure compost users were interviewed. Solid manure are applied to composting. Slurry and wastewater are simplified aeration method to produce liquid fertilizer. The open elongated type manure composting are generally used on manure compost centers jointly used by several farms. The amount of annually manure compost production was most common in the range of $5{\sim}10$ thousand tons per manure compost center. The manure compost utilization and cucumber yield were mostly $6{\sim}15$ tons and $20{\sim}27$ tons per 10a of cucumber farmland, respectively. Environmentally friendly use both of manure compost and chemical fertilizer are recommended for natural recycling agriculture.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.8
• /
• pp.17-27
• /
• 2016

High-speed trains have been developed widely in European countries and Japan in order to transport large quantity of people and commodities in short time. Additionally, a high speed train is one of the most desirable and environmentally friendly transportation methods. When a high speed train enters a tunnel, aerodynamic resistance is generated suddenly. This resistance causes micro pressure wave and discomfort to passengers. Due to this aerodynamic pressure against the train, a large amount of traction is required for the operation of a train in a tunnel. Therefore, it is essential to incorporate a pressure relief system in a tunnel in order to reduce aerodynamic resistance caused by a high-speed train. A pressure relief duct and a vertical shaft are representative measures in a tunnel. This study represents the effect of pressure relief ducts in order to alleviate positive and negative normal pressures acting on a train. One-dimensional numerical simulations were carried out in order to estimate the effect of pressure relief systems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.594-600
• /
• 2016

The present study numerically investigated the gas leakage characteristics in a simplified underground combined cycle power plant. The effect of obstacles near a crack location on the gas concentration in the confined space was analyzed by using the lower flammable limit (LFL) of methane gas. When the jet flow was close to the vertical walls, the longitudinal leakage distance increased by about 60% (when an obstacles was present) compared to the case without any obstacle, because these obstacles prevented transverse flows. In addition, when an air filter was installed near to the trajectory of the gas flow, the longitudinal leakage distance was similar to the distance between the crack and obstacle, whereas the transverse leakage distance increased up to 8 times compared to the case without any obstacle. As the jet flow impacts on the obstacle and changes its direction, the gas flows recirculate. Therefore, it is necessary to consider the effect of the structure and facility locations on the trajectory of the jet flow to propose an accident prevention system in confined spaces.

• Journal of Information Management
• /
• v.40 no.3
• /
• pp.125-150
• /
• 2009

This study aims to investigate current situation and improvement method of correctional facility libraries in Korea. Thus this study made the following suggestions to improve the operation of correctional facility library and to facilitate its growth so that the inmates' basic right to know and access information could be guaranteed: First, there should institutional and legal grounds for the establishment and operation of correctional facility library such as standards, guidelines, and enactments; second, the government should provide enough budgets for human and material resources so that a prison library can equip itself with materials, facilities, and staff to run smoothly; third, the inmates' free access to the library service should be guaranteed in an open space; fourth, the library should introduce an automation system for lending, returning, and handling materials; fifth, a collaboration system with external resources should be set up to make effective use of lacking resources; sixth, programs should be researched and developed to analyze the size and composition of the inmates, the needs of the inmates, and available service; and finally, there should be staff with the qualification of a librarian to be responsible for the operation and management of a correctional facility library and to offer specialized library service to the inmates.

• Journal of the Korean Institute of Gas
• /
• v.12 no.2
• /
• pp.38-41
• /
• 2008

In this research, we propose a new method for tracking the release rate using the concentration data obtained from the sensor. We used a sensor network that has already been set surrounding the area where hazardous gas releases can occur. From the real-time sensor data, we detected and analyzed releases of harmful materials and their concentrations. Based on the results, the release rate is estimated using the neural network. This model consists of 14 input variables (sensor data, material properties, process information, meteorological conditions) and one output (release rate). The dispersion model then performs the simulation of the expected dispersion consequence by combining the sensor data, GIS data and the diagnostic result of the source term. The result of this study will improve the safety-concerns of residents living next to storage facilities containing hazardous materials by providing the enhanced emergency response plan and monitoring system for toxic gas releases.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.2
• /
• pp.165-170
• /
• 2014

Shear horizontal (SH) waves propagate as a type of plate wave in a thin sheet. The dispersion characteristics of SH waves can be used for signal analysis. Therefore, SH-waves are useful for monitoring the structural health of a thin-sheet-structure. An electromagnetic acoustic transducer (EMAT), which is a non-contact ultrasonic transducer, can generate SH-waves easily by varying the shape and array of magnets and coils. Therefore, an EMAT can be applied to an automated ultrasonic testing system for structural health monitoring. When used as a sensor, however, the EMAT has a weakness in that electromagnetic interference (EMI) noise can occur easily in the automated system because of motors and electric devices. Alternatively, a fiber optic sensor works well in the same environment with EMI noise because it uses a light signal instead of an electric signal. In this paper, a fiber Fabry-P$\acute{e}$rot interferometer (FFPI) was proposed as a sensor to receive the SH-waves generated by an EMAT. A simple test was performed to verify the performance of the FFPI sensor. It is thus shown that the FFPI can receive SH-wave signals clearly.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.100-106
• /
• 2019

Ground and high altitude simulated combustion experiments were conducted using a liquid rocket engine with hydrogen peroxide and kerosene as the propellant. A ground and high altitude simulated combustion test facility was constructed by installing a high altitude model diffuser and TMS (Thrust Measuring System) on a vertical combustion test bench. The thrust characteristics according to altitude were investigated using the combustion test equipment. The diffuser was designed on a 1:4.8 scale to verify the characteristics of the high diffusing diffuser and starting pressure. The cold flow tests were conducted using nitrogen gas, and the performance characteristics and starting characteristics of the scale down diffuser were verified. A diffuser and TMS were installed on the vertical combustion test bench, and the thrust correction equations for the system resistance were derived. The thrust correction equations were derived from the step test and vacuum step test before the actual hot firing test. Nozzles with an operating altitude of 10km were designed. Hot firing tests were conducted to analyze the thrust characteristics according to the operating altitude changes. The actual thrust was calculated using each correction equation with the thrust value measured by the TMS.