• Title/Summary/Keyword: 설계파

Search Result 2,295, Processing Time 0.03 seconds

Numerical Analysis of Wave Impact Forces in Numerical Wave Basin (수치파 수조를 이용한 파랑 충격력 수치해석)

  • Shin, Young-Seop;Hong, Key-Yong
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • v.1
    • /
    • pp.205-210
    • /
    • 2006
  • The impact forces of the highly nonlinear waves are one of the important factors in designing the ocean structures. The impact forces are very difficult to analyze numerically and experimentally because they are impulsive in magnitude and occur instantaneously. In this study the numerical program based on N.S. equations are used to investigate the impact forces of steep waves where the waves are gene rated by the wave maker in the numerical wave basin. The arbitrary steep waves are generated by the superposition of waves of single frequency and the impact forces on vertical cylinder are simulated on the multiblock grids. V.O.F. and the local height function methods are used to track the free surfaces. To validate the numerical analysis the numerical results are compared with the experimental ones and the acceptable agreements are found. It is thought that more studies on the simulations of the incoming breaking waves and the impact forces on the vertical cylinder should be made to obtain the useful results to be applied in the offshore design.

  • PDF

Design and fabrication of PSK carrier recovery circuit using multi-layer coupled line (다층형 결합 선로를 이용한 반송파 복원 회로 설계 제작)

  • Kim, Young-Wan
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.13 no.10
    • /
    • pp.2039-2044
    • /
    • 2009
  • The PSK carrier signal recovery circuit using multi-layer coupled line was analyzed and designed. The fabricated carrier recovery 6 port element with multi-layer coupled line structure gets the simple architecture. It is possible to implement the carrier signal recovery circuit of the same structure with the multi-layer six port phase correlator of the direct receiver front-end. Based on the analysis of RML carrier recovery circuit using the multi-layer coupled line 6-port phase correlator, the multi-layer coupled line carrier signal recovery structure for multi-mode coherent demodulation was proposed. The fabricated multi-layer coupled line carrier signal recovery circuit for quadrature phase shift-keying shows a good carrier signal characteristic with a constant phase and phase error below ${\pm}3o$.

design of a Wave Absorber for a Small Sized Sphere (크기가 작은 구의 전파흡수체의 설계)

  • 심재륜;김효태
    • Proceedings of the IEEK Conference
    • /
    • 1998.10a
    • /
    • pp.367-370
    • /
    • 1998
  • 크기가 작은 구의 전파흡수체의 설계 방법을 제시하였다. 산란현상을 물리적인 관점에서 보면 크기가 작은 구의 역산란파는 반사파뿐만 아니라 회절파에 대한 영향을 함께 고려하여야 한다. 본 방법으로 구한 전파흡수체를 크기가 작은 구에 코팅하였을 경우 기존의 무한 평면으로 가정하여 구한 전파흡수체 보다 우수한 흡수 성능을 보인다.

  • PDF

특집-일본의 재해예방대책 - 2. 토야마현 뉴젠어항에 관한 재해복구사업 및 재해대책 응급사업

  • 한국어촌어항협회
    • 어항어장
    • /
    • s.89
    • /
    • pp.35-40
    • /
    • 2010
  • 뉴젠어항의 배후 취락인 아시자키(芦崎)지구는 호안 제방을 넘은 파도가 취락내로 흘러들어와 사상자 16명, 주택의 전반파 11동, 침수 117동 등 큰 피해를 일으켰다. 뉴젠어항 해안에는 재해를 입은 해안 보전시설의 배후취락 피해도 심각하여 원형복구가 아닌 재해발생 파랑을 고려하여 설계파를 재검토, 필요 최소한도의 복구공사를 실시하게 되었다.

  • PDF

Design of 100mW Frequency Tripler Operating at 7 GHz (7 GHz 대역 100 mW 주파수 3체배기의 제작)

  • Roh, Hee-Jung;Joo, Jae-Hyun;Koo, Kyung-Heon
    • Journal of Advanced Navigation Technology
    • /
    • v.14 no.1
    • /
    • pp.20-26
    • /
    • 2010
  • In this paper, a frequency tripler has been designed with 100mW medium-power using P-HEMT. It is designed to obtain 7.2 GHz frequency at the output that is an integer multiple of 2.4 GHz input frequency by using nonlinear device that produces 3rd harmonic. The frequency tripler is designed by using load-pull simulation. To suppress the 2nd and fundamental, notch filter is used for the frequency tripler. The tripler is designed to obtain about 21dBm output power with 15 dBm input, i.e., 6 dB conversion gain and the suppression of 20 dBc at fundamental, and 30 dBc at the second harmonics.

Design of Carrier Recovery Loop for Receiving Demodulator in Digital Satellite Broadcasting (디지털 위성방송 수신용 복조기를 위한 반송파 복원 회로 설계)

  • 하창우;이완범;김형균;김환용
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.26 no.11B
    • /
    • pp.1565-1573
    • /
    • 2001
  • In order to resolve problems according to the phase error in QPSK demodulator in the digital satellite broadcasting, the demodulator requires carrier recovery loop which searches for the frequency and phase of the carrier. In this paper the drawback of NCO of the conventional carrier recovery loop is to wastes a amount of power for the structure of Look-up table , we designed the structure of combinational logic without the Look-up table. In the comparison with dynamic power of the proposed NCO, the power of NCO with the Look-up table is 175[${\mu}$W], NCO with the proposed structure is 24.65[${\mu}$W]. As the result, it is recognized that loss power is reduced about one eighth. In the simulation of carrier recovery loop designed QPSK demodulator, it is known that the carrier phase is compensated.

  • PDF

제주외항 2단계 항만시설 설계

  • Han, Tae-Yeong;Lee, Jae-Wan
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2007.12a
    • /
    • pp.163-165
    • /
    • 2007
  • 제주 외항의 2단계 항만시설 사업으로 동방파제, 동방파호안, 접안시설, 친수호안, 접속호안 등 2,374m 구간에 대해 방파제 내파 안정성과 반사파 저감을 위한 단면계획을 통해 설계에 반영하였으며 지반 침하 및 지진피해 최소화를 위한 구조물의 사용 및 내구성을 중대시켰으며, 특히 크루저 선박의 본격취항을 대비한 친수공간개념의 도입에 많은 노력을 기울였다. 대상 사업지는 지형적 특성상 복잡한 형태의 고파랑이 작용하므로 방파제의 설계파를 7.3m로 상향조정하였고, 방파제 제간부에 발생하는 충격쇄파압에 대한 안정을 확보하기 위해 소파블록 피복케이슨제를 적용하였다. 제주도가 가지는 국제적 위상에 맞추어 국제미항개발, 레저형 웰빙공간조성 및 제주항이 가지는 자연적 특성을 반영하여 친수 방파제와 호안 및 배후시설의 친환경적인 배려를 최대화 하였다. 해양 생태계 보호를 위하여 해조류 서식지 및 해중림 조성 등 생태복원계획도 수립하였다.

  • PDF

Analysis of a Passive Harmonic Filter for Rectifiers (정류기부하의 수동 고조파필터(Passive Harmonic Filter) 분석 및 설계)

  • Cho, Young-Sik;Kim, Bok-Ryul;Goo, Chul-Soo;Cha, Han-Ju
    • Proceedings of the KIEE Conference
    • /
    • 2008.07a
    • /
    • pp.898-899
    • /
    • 2008
  • 본 논문에서는 3상 정류기부하에서 주로 발생하는 5차, 7차등의 저차 고조파를 제거하기 위하여 간단한 구조와 경제성이 있는 Single-tuned Second-order Filter를 설계하였다. 사례연구는 원자력발전소 무정전전원계통(UPS)의 임의의 한 모선을 대상으로 하였으며 계통을 모델링하여 분석한 결과를 토대로 수동필터를 설계하였다. 설계된 필터는 범용 컴퓨터프로그램인 PSIM을 이용하여 시뮬레이션을 수행하였으며 시뮬레이션 결과 해당차수의 고조파를 현저하게 감소시키는 양호한 결과를 얻었다.

  • PDF

Analysis of Arrayed Waveguide Grating Waveglength Filter using Wide Angle Beam Propagation Method (Wide Angle BPM 을 이용한 광도파로열 격자 파장 필터의 해석)

  • Park, Jun-O;Jeong, Yeong-Cheol
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.39 no.2
    • /
    • pp.46-55
    • /
    • 2002
  • The key component to accomplish the WDM all optical network is an Arrayed Waveguide Grating(AWG) wavelength filter Numerical analysis is necessary for design and analysis of optical components like AWG wavelength filter. Beam Propagation Method(BPM) is the most widely-used method. In this paper, we analyze the difference between the paraxial BPM and the WA-BPM when they are applied to the analysis of InP/InGaAsP/InP AWG wavelength filter. The paraxial BPM is based on paraxial approximation, and the WA-BPM is based on the low order Pade approximant. The side lobe level(SLL) and insertion loss calculated from both methods are compared. The high order Pade approximant will to used to more accurate design and analysis of AWG.

Carrier Tracking Loop Design Using FLL-assisted PLL Scheme for Galileo L1F Channel (갈릴레오 L1F 채널에서 FLL-assisted PLL 기술을 이용한 반송파 추적 설계)

  • Choi, Seung-Duk;Lee, Sang-Kook;Hawng, In-Kwan;Shin, Cheon-Sig;Lee, Sang-Uk
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.33 no.12A
    • /
    • pp.1217-1224
    • /
    • 2008
  • The carrier tracking has to be basically completed for accurate positioning of Galileo satellite system. The FLL for tracking frequency errors is robust to dynamic stress causing changes of propagation time but hardly tracks accurate carrier tracking. The PLL for tracking phase errors provides accurate carrier tracking but is sensitive to dynamic stress and its tracking performance is decreased when high dynamics exist. In this paper, we design the carrier tracking loop with the FLL-assisted PLL loop filter and co-operations of FLL and PLL to achieve accurate carrier tracking in high dynamic stress. we prove the performance of designed carrier tracking loop via simulations.