• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.7
• /
• pp.645-653
• /
• 2013

Seoul National University flap(SNUF) blade is a small-scale rotor blade incorporating a small trailing-edge flap control surface driven by piezoelectric actuators at higher harmonics for vibration attenuation. Initially, the blade was designed using two-dimensional cross-section analysis and geometrically exact one-dimensional beam analysis, and its material configuration was finalized. A flap-deflection angle of ${\pm}4^{\circ}$ was established as the criterion for enhanced vibration reduction based on an earlier simulation. The flap-linkage mechanism was designed and static bench tests were conducted for verifying the performance of the flap-actuation mechanism. Different versions of test beds were developed and tested with the designed flap and the selected APA 200M piezoelectric actuators. Through significant improvements, a maximum deflection of ${\pm}3.7^{\circ}$ was achieved. High-frequency experiments were conducted for evaluating the performance, and the transfer function of the test bed was determined experimentally. With the static tests almost complete, the rotor power required for testing the blade in a whirl tower (centrifugal environment) was calculated, and further preparations are underway.

• Journal of the Korea Concrete Institute
• /
• v.20 no.4
• /
• pp.451-458
• /
• 2008

The near-fault ground motion (NFGM) is characterized by a single long period velocity pulse of large magnitude. NFGM's have been observed in recent strong earthquakes, Izmit Turkey (1999), Kobe Japan (1995), Northridge USA (1994), etc. These strong earthquakes have caused considerable damage to infrastructures because the epicenter was close to the urban area, called as NFGM. Extensive research for the near-fault ground motion (NFGM) have been carried out in strong seismic region, but limited research have been done for NFGM in low or moderate seismic regions because of very few records. The purpose of this study is to investigate and analyze the effect of near-fault ground motions on reinforced concrete (RC) bridge piers with lap-spliced longitudinal reinforcing steels. The seismic performance of four RC bridge piers under near-fault ground motions was investigated on the shake table. In addition, a RC bridge pier is subjected to pseudo-dynamic loadings. Test results showed that large residual displacements were observed in RC bridge piers under NFGM. RC specimens on the shake table failed at relatively low displacement ductility, compared with the displacement ductility of RC bridge pier subjected to pseudo-dynamic loadings.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.4
• /
• pp.221-232
• /
• 2023

This paper presents a novel convolutional neural network (CNN)-based approach for predicting bolt clamping force in the early bolt loosening state of bolted structures. The approach entails tightening eight bolts with different clamping forces and generating frequency responses, which are then used to create a similarity map. This map quantifies the magnitude and shape similarity between the frequency responses and the initial model in a fully fastened state. Krylov subspace-based model order reduction is employed to efficiently handle the large amount of frequency response data. The CNN model incorporates a regression output layer to predict the clamping forces of the bolts. Its performance is evaluated by training the network by using various amounts of training data and convolutional layers. The input data for the model are derived from the magnitude and shape similarity map obtained from the frequency responses. The results demonstrate the diagnostic potential and effectiveness of the proposed approach in detecting early bolt loosening. Accurate bolt clamping force predictions in the early loosening state can thus be achieved by utilizing the frequency response data and CNN model. The findings afford valuable insights into the application of CNNs for assessing the integrity of bolted structures.

• Journal of the Korea Concrete Institute
• /
• v.17 no.6 s.90
• /
• pp.975-982
• /
• 2005

Scientific community agrees about the fact that base Isolation provides interesting solutions to minimize the seismic risk. Reliability of such a technique is nowadays proofed by a large number of applications like public buildings, nuclear plants, bridges, etc. This paper reports the results of performance verification tests of the base isolated RC building with the laminated rubber bearings which is manufactured by enterprise in Korea. The shaking table tests were performed using a three story model scaled to 1/3 of the prototype RC apartment building. Several major earthquake records were scaled to different peak ground accelerations and used as input base excitations. Especially in this study, effect of earthquake characteristics on response reduction and effect of the intensity of excitations are studied. Through the verification tests, the validity of the applied base isolaion device and the response reduction effect against earthquakes are confirmed.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.171-180
• /
• 2013

Generally, when we apply zernike moments value for matching, we can use those moments value obtained from projecting image information under circumscribed circle to zernike basis function. However, the problem is that the power of discrimination can be reduced because hand images include lots of overlapped information due to its special characteristic. On the other hand, when distinguishing hand poses, information in specific area of image information except for overlapped information can increase the power of discrimination. In this paper, in order to solve problems like those, we design R3 ring mask by combining image obtained from R2 ring mask, which can weight information of the power of discrimination and image obtained from R1 ring mask, which eliminate the overlapped information. The moments which are obtained by R3 ring mask decrease operational time by reducing dimension through principle component analysis. In order to confirm the superiority of the suggested method, we conducted some experiments by comparing our method to other method using seven different hand poses.

• Korean Journal of Optics and Photonics
• /
• v.5 no.1
• /
• pp.1-8
• /
• 1994

A five mirror system with a reduction magnification(M=+1/5) is designed for DUV optical lithography. First, for spherical mirror systems, the numerical solutions of all zero 3rd order aberrations are derived and the 3-dimensional shape of the solution-domain is obtained. In these solutions, we select solutions which have as less residual aberrations and smaller central obscurration as possible and the aspherization is carried out to the last two spherical mirrors to obtain a system that has as higher NA as possible. Finally we obtain the system of which NA is 0.45, the central obscuration is about 25% and the resolution is about 650 cycles/mm at the 50% MTF value criterion and the depth of focus of 0.8${\mu}m$ for the nearly incoherent illumination (${\sigma}$=1.0) and the wavelength of 0.193${\mu}m$ (ArF excimer laser line).

• Journal of KIISE:Databases
• /
• v.32 no.5
• /
• pp.498-508
• /
• 2005

A shape data is used one oi most important feature for image retrieval as data to reflect meaning of image. Especially, structural feature of shape is widely studied because it represents primitive properties of shape and relation information between basic units well. However, most structural features of shape have the problem that it is not able to guarantee an efficient search time because the features are expressed as graph or tree. In order to solve this problem, we generate curvature-based morphological graph, End design key to cluster shapes from this graph. Proposed this graph have contour features and morphological features of a shape. Shape retrieval is accomplished by stages. We reduce a search space through clustering, and determine total similarity value through pattern matching of external curvature. Various experiments show that our approach reduces computational complexity and retrieval cost.

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.2
• /
• pp.119-125
• /
• 2000

We analyzed to calculate optical capacity after we chose established 2 component zoom copier lens system in this research. As the lens system is zoom lens system of finite object point, it has moving area limited not like to use generally camera zoom lens of infinite object point because it moves between object and image plane. The magnification of optical system can obtain -1.41~-0.64 i.e., extended or shortened image as transverse magnification, and it acquires f/12 and about $20^{\circ}$ field of view. Although this 2 component zoom copier lens system will be down resolution and dark compared with f/2.8 acquired at camera lens, it will be possibile to be able to make large aperture and it can acquire more better correct aberration with the addition of auxiliary group forward or backward.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.10
• /
• pp.1038-1047
• /
• 2009

The development process of a gas generator for a 30-tonf pump-fed space liquid rocket engine is described. Starting from the development of an injector, followed by subscale and full-scale test specimens, the development of LOx/kerosene fuel-rich gas generator has been concluded successfully. Various analytical methods have been utilized in the course of design and the performance requirements have been verified experimentally through ignition tests, combustion performance and stability assessment tests and duration tests. The gas generator has proven its workability and stability within a defined operation window of varying chamber pressure and mixture ratio and demonstrated compliance to the performance and life time requirements.

• Journal of Advanced Navigation Technology
• /
• v.17 no.5
• /
• pp.524-544
• /
• 2013

In this paper, A tow system of miniature establishes each motor to individual 1C1M methods to control for a permanent magnet synchronous motors (PMSM) is constructed. You assume that is wiring having had the ability that can all absorb regenerative power which occurred when permanent magnet synchronous motors(PMSM) brake is all used to it, and to occur about agreement use scope expansion my electricity. To regenerative braking power securities of a PMSM and to stop of the bronzes my a control security, and that the electricity as you apply to vector control method and an speed sensor of controller to microprocessor, And you studied to speed, motor electricity energy control method to the algorithm and you brake a revival by regenerative braking power securities of a permanent magnet synchronous motors. It is proposed that motor control method to the algorithm you brake a revival by electricity braking power securities, you do to simulations regarding a momentum load and experiment.