• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2023.11a
• /
• pp.221-221
• /
• 2023

1969년에 발간된 API521 1st edition에서는 Flare Load 저감용으로 적용되는 HIPS (High Integrity Protection System)는 모두 Pressure Safety Valve의 고장확률보다 낮은 SIL 3 (Safety Integrity Level)등급을 적용할 것을 요구하고 있다. Flare Stack 저감용 HIPS는 주로 압축기 출력압력상승, Reboiler Steam 과다주입, 전력공급중단냉각펌프고장 등에 의한 Flare 발생을 예방하기 위한 기능을 가진 SIF (Safety Instrumented Function)로 구성된다. 하지만 2007년도 발간된 API521 5th edition에서는 LOPA (Layer Of Protection Analysis) 분석을 통해 Target SIL을 도출하는 것으로 요구사항을 변경했다. 이에 따라 이번 연구에서는 Flare Load에 가장 큰 영향을 미치는 시나리오 중 대표적인 시나리오를 대상으로 HAZOP(Hazard and Operability Study)과 LOPA분석을 실시해서 Target SIL이 어떻게 도출되는지를 연구했다. Flare Stack에서 Flare를 발생시키는 대표적인 시나리오들에 대해 LOPA분석을 실시한 결과 압축기 출력압력상승은 SIL 2, Reboiler Steam 과다주입은 SIL 3, 전력공급중단은 SIL 0, 냉각펌프고장은 SIL 0로 모두가 SIL 3 가 나오지는 않았다. SIF 설계 시 Target SIL을 만족시키는 것도 중요하지만 운전 시 SIL 등급이 계속 유지되게 하지 위해 인적오류, 시스템적 고장, 하드웨어고장 등에 의해 SIF 기능불능화가 되는 것을 예방하기 위한 기능안전관리시스템 (FSMS)를 적용하는 것도 중요하다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.05a
• /
• pp.300-303
• /
• 2008

IT 관련 프로젝트를 진행 시 프로젝트 진행 도중 예상치 못한 많은 문제에 봉착하게 된다. 본 논문에서는 IT 프로젝트 대부분이 도입, 사용하는 요구사항분석-설계-개발-테스트-배포-유지보수단계 중 개발단계 및 유지보수 단계에서 발생할 수 있는 문제점에 초점을 맞추었다. PMG 란 Project Management Negotiator 의 약자로서 개발 시 고객의 요구사항이 변경되면 고객과 개발자 간의 개발에 소요되는 난이도, 일정, 비용에 따른 관점이 다를 수 있으므로, 이러한 차이점을 서로 이해 할 수 있는 범위 내에서 감소시킬 수 있는 모델을 제시한다. 또한 제시한 모델에 근거한 매핑테이블과 프로세스를 개발하고 실제 pilot 시스템을 구축하여 효용성을 검증한다. 제시한 프로젝트 관리 협상 모델을 통하여 일정에 차질 없는 프로젝트가 수행 가능하며 비용절감 및 고객만족 효과를 거둘 수 있다. 결과적으로 일정, 비용 측면 및 고객 만족 세 가지 측면에서 기존의 프로젝트 개발 방법론보다 더 나은 일정준수, 효율성, 정확성 등의 정량적, 정성적 만족을 확보할 수 있다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.3
• /
• pp.477-485
• /
• 2018

To control manage environmental load during construction work, it is required to ascertain an accurate quantity for materials those are using during the construction. In construction industrial nowadays, especially on design part, there are lots of mistakes occurred on quantity take-off between plan documents and actual work. That mistakes are caused by omission of design items, overcount because of interference each materials or simple calculate error. Besides, in case of a construction project, engineers are impossible to design perfectly due to a lot of invalid variable in a construction site. Thus, design errors and changes occur frequently in the process of construction work or design due to such unclear elements. And in case of LCA assessment based on 2D design, there is difficult for an engineer who is in charge to calculate the volume of materials manually using drawings and relevant specifications. This study is aimed for examining and verifying a high reliable method of evaluating environmental load which is useful in construction process through comparing LCA analysis. In addition, this study provides the method of calculating the volume of materials and LCA assessment in working on the basis of 2D design, using the specifications which is used for LCA evaluation, and possibility of utilizing the LCA assessment by introducing BIM design technic to improve the former problem through comparing and analyzing the previous method with 3D-based evaluation process.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.50 no.4
• /
• pp.20-36
• /
• 2022

This study aims to provide basic data for high-quality street tree management by setting reasonable management items and appropriate unit prices by reviewing the adequacy of current street tree management. Currently, street tree management items, except for street tree pruning, use general landscape tree quantity per unit for the street tree management quantity per unit. KEPCO (Korea Electric Power Corporation) applied pruning items from standard electric production infrastructure and carried out the activities at an average unit price of 51% lower for heavy pruning and 39% lower for light pruning than the standard estimate. This was judged to be a level that could not maintain or increase the quality of street tree management. It was determined that an appropriate standard unit price for street tree management was necessary. To improve the quantity per unit for the proper management of street trees, it was necessary to review costs in the field. However, due to the absence of data on actual construction costs in the domestic landscape field, detailed items of the US RSMeans Building Construction Cost Data (RSMeans) were reviewed, and the actual construction costs were calculated by applying personal domestic expenses. As a result, the standard of the estimated unit showed a good ratio of 107% for heavy pruning of street tree pruning compared to the actual construction cost, but light pruning was underestimated with a 59% ratio. Shrub pruning was 82%, weeding was 92%, tree fertilization was 87%, and windbreak wall installation was 91% under-engineered. In addition, it was also confirmed that the watering by sprinkler trucks and chemical spraying were over-designed compared to the actual construction cost at the rates of 118% and 124%, respectively. Due to the specificity of the street trees, the increase in personal expenses and the input cost of equipment, such as road safety controls, were judged to be the main cause of the underestimation of items. Therefore, it is necessary to add items related to street trees and general landscape trees to the landscape maintenance items of the standard of the estimated unit.

• Journal of KIISE:Software and Applications
• /
• v.35 no.12
• /
• pp.716-730
• /
• 2008

In Service-Oriented Architecture (SOA), service providers develop and deploy reusable services on the repositories, and service consumers utilize blackbox form of services through their interfaces. Services are also highly evolvable and often heterogeneous. Due to these characteristics of the service, it is hard to manage the faults if faults occur on the services. Autonomic Computing (AC) is a way of designing systems which can manage themselves without direct human intervention. Applying the key disciplines of AC to service management is appealing since key technical issues for service management can be effectively resolved by AC. In this paper, we present a theoretical model, Symptom-Cause-Actuator (SCA), to enable autonomous service fault management in SOA. We derive SCA model from our rigorous observation on how physicians treat patients. In this paper, we first define a five-phase computing model and meta-model of SCA. And, we define a schema of SCA profile, which contains instances of symptoms, causes, actuators and their dependency values in a machine readable form. Then, we present detailed algorithms for the five phases that are used to manage faults the services. To show the applicability of our approach, we demonstrate the result of our case study for the domain of 'Flight Ticket Management Services'.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.73-80
• /
• 2012

In this article, we propose a P2P-based mobility management protocol for global seamless handover in heterogeneous wireless networks. Unlike previous mobility management protocols such as IETF MIPv4/6 and its variants, the proposed protocol can support global seamless handover without changing the existing network infrastructure. The idea of the proposed protocol is that the location management function for mobility management is separately supported from packet forwarding function, and bidirectional IP tunnels for packet transmission are dynamically constructed between two end-to-end mobile hosts. In addition, early handover techniques have been developed to avoid large handover delays and packet losses using the IEEE 802.21 Media Independent Handover functions. The architecture and signaling procedure of the proposed protocol have been designed in detail, and the mathematical analysis and simulation have been done for performance evaluation. The performance results show that the proposed protocol outperforms the existing MIPv6 and HMIPv6 in terms of handover latency and packet loss.

• Journal of KIISE
• /
• v.42 no.8
• /
• pp.1057-1064
• /
• 2015

The tactical network is system based on wireless networking technologies that ties together surveillance reconnaissance systems, precision strike systems and command and control systems. Several alternative paths exist in the network because it is connected as a grid to improve its survivability. In addition, the network topology changes frequently as forces and combatants change their network access points while conducting operations. However, most Internet routing standards have been designed for use in stable backbone networks. Therefore, tactical networks may exhibit a deterioration in performance when these standards are implemented. In this paper, we propose Priority based Multi-Path routing with Local Optimization(PMPLO) for a tactical backbone network. The PMPLO separately manages the global and local metrics. The global metric propagates to other routers through the use of a routing protocol, and it is used for a multi-path configuration that is guaranteed to be loop free. The local metric reflects the link utilization that is used to find an alternate path when congestion occurs, and it is managed internally only within each router. It also produces traffic that has a high priority privilege when choosing the optimal path. Finally, we conducted a simulation to verify that the PMPLO can effectively distribute the user traffic among available routers.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.616-619
• /
• 2008

In this paper, we design and implement the authentication system for home network service and applied it to actual sensor nodes. We achieved authentication key, encryption and decryption applied RC5 encryption algorithm of SNEP. In addition, we used pair-wise key pre-distribution for prevention of authentication sniffing in wireless sensor network. The experiment environment consists of a base station receiving data and sensor nodes sending data. Each sensor nodes sends both the data and encrypted authentication key to the base station. As a simulation environment, we assumed some what-if scenarios of security menaces in home network service. And we slightly altered the TOS_Msg construction of TinyOS. The experiences had shown that the malfunction doesn't happen in communication among other groups. And we confirmed in tests that the system is secure when a sensor having malicious propose is added.

• Journal of the Korea Society of Computer and Information
• /
• v.9 no.1
• /
• pp.79-86
• /
• 2004

In general, operating system is offering the security function of OS level to support several web services. However, it is true that security side of OS level is weak from many parts. Specially, it is needed to audit/trace function in security kernel level to satisfy security more than B2 level that define in TCSEC(Trusted Computer System Evaluation Criteria). So we need to create audit data at system call invocation for this, and do to create audit data of equal format about almost event and supply information to do traceback late. This Paper Proposes audit/trace system module that use LKM(Loadable Kernel Module) technique. It is applicable without alteration about existing linux kernel to ensure safe evidence. It offers interface that can utilize external audit data such as intrusion detection system, and also offers safe role based system that is divided system administrator and security administrator These data will going to utilize to computer forensics' data that legal confrontation is Possible.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.6 s.22
• /
• pp.146-153
• /
• 2004

The purposes of this study are to survey unfair aspects of specific provisions in the construction contract, and to suggest counterplans and institutional reformations. The research method of this study includes judicial precedent analysis and a questionnaire survey, The results of this study are as follows: 1) the main problems of unfair specific provisions are payment condition, shifting of the responsibility and adjustment in the contract sum. 2) counterplans ate suggested according to the construction phase : bid, construction and completion phase. 3) institutional reformations include firming up regulations, supervision, invigoration of claim, development of variation guideline, and so on.