• International Journal of Highway Engineering
• /
• v.2 no.4 s.6
• /
• pp.123-131
• /
• 2000

The compaction equipment and the Marshall stability head are the two important testing equipment for the Marshall test. The compaction equipment is closely related to the air void, VMA and compactability of the mixtures, and the stability head is related to the Marshall stability and the flow, therefore the size and the shape of the equipment is essential for finding the accurate optimum asphalt content for the asphalt mix design. However, the size and the shape of the equipment currently used and the condition of the installation of compaction pedestal in this country are different from each agency and manufacturer. The national inspection of the Marshall equipment is necessary because the difference can affect the test results and also the performance of the asphalt pavement.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.1
• /
• pp.61-72
• /
• 1997

The implementation of base station transceiver for Wideband CDMA(Code Division Multiple Access) PCS(Personal Communication Service) system using spread spectrum CDMA technology is presented in this paper. The receiver that requires wide dynamic range and high sensitivity and the transmitter that has good spurious emission supression were designed and implemented with 5 MHz RF channel bandwidth. This paper shows the some factors that should be considered and simulated using the RF simulation S/W with commercial and customized components. The implemented transceiver based on the simulation gave good results that satisfied the functional specifications of the transceiver.

• Aerospace Engineering and Technology
• /
• v.5 no.2
• /
• pp.67-76
• /
• 2006

This paper describes the analysis method to define the system specification for conducted EMI environment and verification method to evaluate the conducted EMI performance. Conducted EMI environment is characterized by the electrical power subsystem which is mainly issued by the switching circuit noise, common ground impedance coupling. To define and control these EMI problems, EMI assesment through system analysis are preceded at the early design phase and then EMI reduction methods are applied during the unit/system development phase. System EMC should be carefully controlled and designed in the consideration of EMC safety margin and its performance is fully evaluated at the whole development period.

• Journal of Convergence Society for SMB
• /
• v.6 no.3
• /
• pp.85-91
• /
• 2016

It was difficult to verify the car number or face of inspector in the closed circuit television because of low CCD pixels and low brightness of lens. So CCTV lens should have higher pixels and brightness. In this paper, the design of zoom lens for mega pixel Closed-Circuit Television (CCTV) was introduced. We applied aspheric lens in order to reduce the spherical aberration and distortional aberration. And we applied focal length of 6-60mm, F number of 1.2, 3 million pixel resolution and magnifying power of 10 times. Also we applied infrared correction in order to use the CCTV camera in day and night effectively. These norms are the most powerful in CCTV zoom lens of focal length of 6-60mm. And if we apply this lens to the box style CCTV camera, we can verify the car number or face within 50m. Auto controlling system will be continued.

• Journal of the Korean Institute of Gas
• /
• v.15 no.6
• /
• pp.57-62
• /
• 2011

In this study, the optimized design for 130 liter storage fuel tank with 70MPa filling pressure has been investigated using a FEM technique and Taguchi design method. The strength safety of a composite fuel tank in which is fabricated by an aluminum liner of 6061-T6 material and carbon fiber wound composite layers of T800-24K has been analyzed based on the criterion of design safety of US DOT-CFFC and Korean Standard. The FEM computed results on the stress safety of 70MPa hydrogen gas tank were compared with a criterion of a stress ratio, 2.4 of US DOT-CFFC and Korean Standard, and indicated the safety. Thus, the optimized design elements based on the Taguchi's method were recommended as an aluminum liner thickness of 6.4mm, a carbon fiber laminate thickness in hoop direction of 31mm and a carbon fiber laminate thickness in helical direction of 10.2mm, which is represented by a design model of No. 5.

• Journal of Korea Port Economic Association
• /
• v.27 no.1
• /
• pp.31-54
• /
• 2011

This paper classifies and defines the infrastructure factors required to performance various logistics activities in domestic logistics centers as base facility, logistics facility, logistics equipment and operation system. The classification of infrastructure factors in this research provide the standard to be able to identify which infrastructure influence on logistics activities directly or indirectly. Also, this paper reviews Korean industrial Standards('KS') related to logistics center and then suggests the reformation of KS reflected on the logistics activities and infrastructures with field-study(321 domestic centers) and advisory meeting1). This review and suggestion can increase the low awareness and use of KS. Lastly, this paper can contribute to increase the effective of logistics centers' plan and operation by providing the improvement direction of KS regarding to logistics centers.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.9 no.4
• /
• pp.309-317
• /
• 2015

In this paper, we proposed the standard test specification for safety and function of hiking stick for the elderly. We have concluded nine factors representing specification of hiking stick through analysis of hiking patents and research papers, products survey of business market, case studies for damaged hiking stick and expert surveys. To test the factors, we designed three different kinds of apparatus to examine twist resistance, stick and tip durability and stick straightness. The sample of hiking sticks purchased from market based on Naver sales ranking top to fifteenth. As a result, we concluded six-standard test specification based on eccentric load, adjustable parts load, hand strap load, basket load, tip load and pull load of hiking stick.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.3
• /
• pp.207-214
• /
• 2017

High voltage electric power transmitter GIS(Gas Insulated Switchgear) above 72.5kV needs to satisfy domestic Korean peninsular standard(ES-6110-0002) in KEPCO with respect to normal and special operation conditions which include internal gas pressure, dead weight, wind and seismic load. Some other requirements not described in Korean standard can be applied from other international standards such as IEC(International Electronical Committee) 62271-203 and 62271-207. The GIS is a kind of pressure vessel structure made of aluminum and filled with SF6 gas of internal pressure 0.4~0.5MPa. Finite element analysis of GIS is performed with such operational loads including seismic loading and the stability and reliability is determined according to ASME BPVC(Boiler and Pressure Vessel Code) SEC. VIII standard where the allowable stress level of the pressure vessel is suggested. The result shows that the stress of GIS is satisfied the allowable stress level and the safety factor is about 2.3 for Korean peninsular standard.

• Journal of the Korean Society of Radiology
• /
• v.10 no.5
• /
• pp.291-298
• /
• 2016

Recently, the interest in the orthodontic treatment for children is increased by a rise in national income level. The number of cephalometric radiography that could diagnose a malocclusion and malposition between teeth and jawbone increased. It required attention to radiation exposure, because the subject of dental examination is children which are more sensitive to radiation and the head and neck, the object of that include radiation sensitive organ such as the thyroid, bone marrow, eyes, salivary gland, and so on. In this study, we measured two-dimensional dose distribution in cephalometric radiography system (VATEC Pax-400C) using Agfa CP-G Plus film and MagicMax Dosimeter, and calculated radiation organ dose of head and neck through MCNPX simulation. And then we designed a radiation protective device to decrease radiation dose. The dose distribution of the cephalometric radiography system irradiated the head and neck overall as well as the oral and maxillofacial parts. The radiation organ dose calculated that thyroid, oesophagus and eyes are irradiated high, and the radiation organ dose decreased about 70 ~ 80% by the application of the radiation protective device. The results of this study will be used construction of database for dental radiation exposure and research of reducing radiation dose.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.664-668
• /
• 2018

Free-standing structures that are especially high are more likely to receive brain attacks caused by lightning. Since special structures are generally part of national industrial structures, lightning strikes mostly cause socio-economic damage. Lightning protection facilities are installed to prevent such lightning damage, but in 2015, support cables on West Sea bridges were hit by lightning, causing a lot of economic damage. Accordingly, the design of a lightning protection system shall establish protective measures after analyzing the risk of debris falling onto the structure. In this thesis, lightning strikes are analyzed directly in relation to the modeling system that operates the actual information collection system for lightning strikes, depending on the location of the tall, free-standing structures, and practical lightning hazard information is provided by a meteorological station. In addition, we propose monitoring and applying a probability correction rate to the calculation of the lightning risk based on the number of lightning strikes directly reaching the ground in order to obtain an effective lightning risk assessment.