• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.1
• /
• pp.74-81
• /
• 2001

The sensorless scheme for Switched Reluctance Motor(SRM) drives must have the robustness and reliability because the noise and error are sensitive. These elements make electrically noisy environments due to the proximity of high current power circuits with small signal electronic circuits when SRM drives. Also, due to the leakage inductances and finite coupling capacitances, these can cause the noise on any low voltage current and voltage measurement circuit. The position estimate error occurs because the current and voltage including the noise are sued as the inputs of sensorless algorithm. In this paper the high robustness and resistance of input noise re described. The fuzzy logic based rotor estimation algorithm and the observer model are used to reduce the tolerance of input data.

• Corrosion Science and Technology
• /
• v.23 no.4
• /
• pp.302-309
• /
• 2024

The purpose of this study was to elucidate effects of a thin (tens to hundreds of nanometers) Ni-flash coating layer on hydrogen embrittlement (HE) and liquid metal embrittlement (LME) in ultra-high-strength electrogalvanized steel with a tensile strength of more than 1 GPa. Various experimental and analytical methods, including thermal desorption spectroscopy, slow strain rate testing, resistance spot welding, X-ray diffraction, and metallographic observation, were employed. Results showed that an increase in Ni target amount for flash coating resulted in a decrease in diffusible hydrogen content during electrogalvanizing, resulting in a significant decrease in HE sensitivity. Moreover, a Ni target amount of more than 1000 mg/m² drastically reduced the occurring frequency and average depth of LME. This reduction could be primarily attributed to formation of Zn-Ni intermetallic phases during the welding process that could inhibit liquefaction of intermetallic phases in the heat-affected zone. This study provides a desirable Ni target amount for Ni-flash coating on ultra-high-strength steels conducted in a continuous galvanizing line or a high-speed batch line to achieve high resistance to both HE and LME.

• Nuclear Engineering and Technology
• /
• v.24 no.2
• /
• pp.141-153
• /
• 1992

Excess tritium analysis was peformed to verify whether or not cold fusion occurs during electrolysis of heavy water in the current density range of 83~600 mA/$\textrm{cm}^2$ for a period of 24 ~ 48 hours with use of palladium electrodes of seven different processing treatments and geometries. The extent of recombination of D$_2$ and $O_2$gases in the electrolytic cell was measured for the calculation of accurate enthaplpy values. The behavior and interaction of hydrogen atoms with defects in Pd electrodes were examined using the Sieverts gas charging and the positron annihilation(PA) method. Slight enrichment of tritium observed was attributed to electrolytic enrichment but not to the formation of a by-product of cold fusion. The extent of recombination of D$_2$and $O_2$gases was 32%. Hence the excess heat measured during the electrolysis was considered to be due to the exothermic reaction of recombination but not to nuclear fusion. Lifetime results from the PA measurements on the Pd electrodes indicated that hydrogen atoms could be trapped at dislocations and vacancies in the electrodes and that dislocations were slightly more preferred sites than vacancies. It was also inferred from R parameters that the formation of hydrides was accompanied by generation of mostly dislocations. Doppler broadening results of the Pd electrodes indicated that lattiec defect sites where positrons were trapped first increased and then decreased, and this cycle was repeated as electrolysis continued. It can be inferred from PA measurements on the cold-rolled Pd and the isochronally annealed Pd hydride specimens that microvoid-type defects existed in the hydrogen-charged electrode specimen.

• Geophysics and Geophysical Exploration
• /
• v.10 no.1
• /
• pp.50-59
• /
• 2007

The advent of towed geo-electrical array surveying on water and land has resulted in datasets of magnitude approaching that of airborne electromagnetic surveying and most suited to 1D inversion. Robustness and complete automation is essential if processing and reliable interpretation of such data is to be viable. Sharp boundaries such as river beds and the top of saline aquifers must be resolved so use of smoothness constraints must be minimised. Suitable inversion algorithms must intelligently handle low signal-to-noise ratio data if conductive basement, that attenuates signal, is not to be misrepresented. A noise-level aware inversion algorithm that operates with one elastic thickness layer per electrode configuration has been coded. The noise-level aware inversion identifies if conductive basement has attenuated signal levels so that they are below noise level, and models conductive basement where appropriate. Layers in the initial models are distributed to span the effective depths of each of the geo-electric array quadrupoles. The algorithm works optimally on data collected using geo-electric arrays with an approximately exponential distribution of quadrupole effective depths. Inversion of data from arrays with linear electrodes, used to reduce contact resistance, and capacitive-line antennae is plausible. This paper demonstrates the effectiveness of the algorithm using theoretical examples and an example from a salt interception scheme on the Murray River, Australia.

• Journal of the Korean Electrochemical Society
• /
• v.22 no.1
• /
• pp.43-52
• /
• 2019

As the application area of lithium secondary batteries becomes wider, performance characterization becomes difficult as well as diverse. To address this issue, battery manufacturers have to evaluate many batteries for a longer period, recruit many researchers and continuously introduce expensive equipment. Simulation techniques based on battery modeling are being introduced to solve such difficulties. Various lithium secondary battery modeling techniques have been reported so far and optimal techniques have been selected and utilized according to their purpose. In this review, the electrochemical modeling based on the Newman model is described in detail. Particularly, we will explain the physical meaning of each equation included in the model; the Butler-Volmer equation, which represents the rate of electrode reaction, the material and charge balance equations for each phase (solid and liquid), and the energy balance. Moreover, simple modeling processes and results based on COMSOL Multiphysics 5.3a will be provided and discussed.

• Journal of Korean Society of Forest Science
• /
• v.103 no.2
• /
• pp.226-232
• /
• 2014

This study was carried out to provide a basic information to improve the landscape view preference with internet questionnaire on slopes of an expressway. According to a questionnaire, the 37% of respondents used express way 5 times per one year. The 89% of respondents catched a glimpse of cutting slopes during driving and felt a good impression with flowers or vegetation in cutting slopes of expressways. The 61% of respondents felt a bad impression, but the 40% in a good impression from logos in cutting slopes of expressways. To improve a landscape view in cutting slopes of express ways, 57% of the respondents preferred natural-friendly techniques, followed by common green techniques (19%), greening of concrete construction (12%) and improvement of landscape views (11%). Landscape view preference before and after construction of green logo in cutting slopes of Seosejong IC was good (43%) and very good (16%), while bad (9%). The 65% of respondents support the installation of drawing or logos in terraced retaining wall of cutting slopes of expressways.

• Korean journal of applied entomology
• /
• v.28 no.1
• /
• pp.16-22
• /
• 1989

A series of experiments was undertaken to learn bionomics and gowt plant resistance of the seedcorn maggot, Delia platura(Meigen), under controlled(24$\pm$$2^{\circ}C$, RH70$\pm$5%, and LD 16:8h)and field conditions. The preoviposition period for the flies was 9 days. The females survived for an average of 50(3-77) and the males for 24(1-59) days. A greater proportion of flies emerged between 6:00 A.M. and 9:00 A.M., soon after the sun rise. After the over-wintering, adults started to emerge in mid-April from pupae located near the soil surface, and peaked in late April by others located deeper. The sex ratio was about 1:1 with total samples of 1,609 females and 1,641 males. Weight of pupae reared from onion was heavier than those from other diets in the laboratory, however its size was samller than that of natural flies. Considerably more eggs were laid near pea seeds than other hosts tested. Among beans, Bapmitkong with blue seed-coat and a cowpea bean strain were preferred for oviposition. 'Namcheon` cultivar was found to be susceptible to attack by the larvae in the laboratory.

• Korean Journal of Environment and Ecology
• /
• v.32 no.2
• /
• pp.140-146
• /
• 2018

Wild boars have expanded their habitats in Korea in recent years and caused serious social problems such as crop damage and appearance in urban areas. This study was carried out from May to October 2012 to investigate the environmental factors that affect crop damage based on actual cases reported in Geochang County of Gyeongnam Province, Korea. The analysis showed that the damages by wild boars occurred mainly between August and September, and rice was damaged most often while sweet potatoes were damaged most intensely. The results indicated that the damages were related to the wild boars' preference of crop and the seasonal availability of crops. Other factors that affected the crop damage included the slope, the topographic relief, and the distances from forest, stream, road, and residential area. There was no significant difference of environmental factor according to damage intensity, suggesting that the wild boars tended to attack the same cropland repeatedly and thus accumulating the damage. Our study suggests that reducing crop damages by wild boars will require cultivating crops less preferred by wild boars, installing electric fences, and controlling wild boar population with hunting and trapping.

• Korean journal of applied entomology
• /
• v.56 no.4
• /
• pp.345-350
• /
• 2017

Sunflower, selected as a trap plant that can be controlled by attracting Ricania spp. adults via attraction has the highest attractiveness during the preoviposition period. Considering the ecological characteristics of Ricania spp., adults are distinguished by the preoviposition and oviposition periods and the attractiveness of sunflower to Ricania spp. adults was 91.4~95.2% higher than that of blueberry during the preoviposition period. On August 20, when Ricania spp. adults entered the oviposition season, sunflower attractiveness was low at 9.8~11.6% owing to preference for tree species. Based on the result of the selection of systemic chemicals that could be used concomitantly with sunflower, all chemicals, except etofenprox, showed a high controlling effect of over 90%, and among them, dinotefuran showed the highest insecticidal rate of 95.8%. The systemic chemicals acetamiprid, dinotefuran, thiamethoxam, and imidacloprid persisted for 13 days (survey period). Therefore, the concomitant use of sunflower and systemic chemicals can reduce the density of Ricania spp. entering farmlands and their populations in surrounding habitats, which are expected to help in stabilizing the ecosystem.

• 한국노년학
• /
• v.38 no.3
• /
• pp.593-605
• /
• 2018

This study examines factors that influence older drivers to consider stopping driving in advance and whose advice plays an important role in the driving cessation decision. Data came from a nationally representative cross-sectional survey of community-dwelling older adults (N=2,076). About two thirds reported that they have considered stopping driving (62.8%) and they preferred to decide by themselves (66.0%). Logistic regression results showed that women and residents in urban areas were twice as likely to consider voluntary driving cessation compared to their counterparts. Each one year increase in age contributed to the probability that respondents would consider driving cessation by five percent. Those with greater difficulties in ADLs due to chronic illnesses were also more likely to consider driving cessation. No sociodemographic and health factors were related to whether older drivers preferred to decide by themselves or listen to others. These results imply that policies to promote self-motivation to stop driving among older drivers would be effective. Furthermore, they suggest it could be important to help older drivers plan their driving cessation in advance while still at a young-old age, and that more attention needs to be paid to men and those living in rural areas among older drivers.