• Journal of the Korean Institute of Telematics and Electronics
• /
• v.11 no.3
• /
• pp.32-35
• /
• 1974

The SCR oscillator is ctaracterized by the second order differential equation which is consistent with both its equivalent circuit and its empirical formula. It is found that the wave form of the SCR oscillator contains the components of higher harmonics and that this oscillator is static since its representative point on the phase tragectory has the sense directed to the equilifrium point.

• Journal of the Korea Concrete Institute
• /
• v.23 no.5
• /
• pp.569-579
• /
• 2011

Reinforced concrete walls subjected to cyclic loading show complicated inelastic behaviors varying with aspect ratio, re-bar detail, and loading condition. In the present study, a macro model for nonlinear analysis of reinforced concrete walls was developed. For exact prediction of inelastic flexure-compression and shear behaviors, the macro model of the wall was idealized with longitudinal and diagonal uniaxial elements. The uniaxial elements consist of concrete and re-bars. Simplified cyclic models for concrete and re-bars under uniaxial loading was used. For verification, the proposed model was applied to slender, lowrise, and coupled walls subjected to cyclic loading. The results showed that the proposed method predicted the nonlinear behaviors of the walls with reasonable precision.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.1
• /
• pp.161-169
• /
• 1989

A stability problem on wave instability of natural convection flow along isothermal vertical cylindrical surfaces has been formulated, accounting for the non-parallelism of the basic flow and thermal fields. Then the problem is solved numerically under the simplifying assumption of the parallelism of the basic flow quantities. It is shown that the flow corresponding to the same characteristic boundary layer thickness becomes more stable as the value of the curvature parameter increases. The stability characteristics for Pr=0.7 appear to be more sensitive to the curvature parameter than those for Pr=7.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.10a
• /
• pp.278-281
• /
• 2004

The purpose of this paper is to show a reliable analytical method to predict the deflections of F/W Composite Motor Case. Structural analysis and testing of a Carbon/Epoxy Composites Motor Case for Pressure Loadings were performed. This paper presents the development of 3-D layered axi-symmetric solid element for finite element analysis. Finite element analyses were preformed considering fiber angle variation in longitudinal and thickness direction by ANSYS. The analytical results agree well with experimental results.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.5
• /
• pp.141-148
• /
• 2000

사면 안정 해석은 주로 파괴 활동면의 전단 강도와 발휘되는 전단 강도의 최대비로서 표현되는 파괴활동의 추정을 위해 기존의 고전적인 방법을 사용하거나 이와 유사한 방법등이 사용되어 왔다. 이러한 방법들은 토질에 있어서의 상호 작용력과 그에 따른 전당력 및 사면 활동면의 반복되는 추정등의 가정으로 불확실성을 내포하고 있다. 본 연구에서는 토질전체를 연속체로 규정하고 비선형 유한요소법을 이용한 토질의 실제 응력과 강도를 정확하게 계산하였다. 사면 안정은 점차적 인증력의 증가로서 사면의 붕괴 활동면이 나타나FEo 까지로 해석되었다. 제시된 방법의 세부적인 사항은 예제를 통하여 설명되어 있다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.424-428
• /
• 2005

본 연구에서는 임의로 변화하는 지형상에 적용시에 보존 특성이 성립하는 쌍곡선형 천수방정식 해석 기법을 개발하였다. 일반적으로 쌍곡선형의 천수방정식은 상류와 사류를 쉽고 정확하게 해석할 수 있고, 또한 Euler 방정식 해석기법을 이용한 다양한 해석기법이 개발되어 있다는 장점을 지니고 있다. 그러나 바닥지형이 변화하는 경우, 생성항과 플럭스항 사이에 수치적 해석기법 차이에서 발생하는 수치적 불균형이 발생하여 수치모형의 적용성이 현저하게 저하된다. 따라서 본 연구에서는 이와 같은 현상을 개선하기 위하여, 기존의 표면경사법을 개선한 기법을 제시하였다. MUSCL-Hancock 기법과 HLLC 근사 Riemann 기법을 이용하였으며, 플럭스항과 수치적 균형을 이루기 위한 이산화기법을 제안하였다. 모형의 검증을 위하여 정상류 상태의 상류와 사류 해석을 수행하였고, 마른바닥에서의 댐붕괴파와 수직한 지형 변화를 갖는 수로상의 서지의 진행 등과 같은 부정류에 대하여 적용하였다. 적용결과, 매우 정확하고 수치적으로 안정된 계산결과를 얻었다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.3
• /
• pp.372-377
• /
• 2011

This paper propose the robust stability algorithm for controlling a hybrid magnetic bearing system. The control object in the magnetic bearing system enables the rotor to rotate without any physical contact by using magnetic force. Generally, the system dynamics of the magnetic bearing system has severe nonlinearity and uncertainty so that it is not easy to obtain the control objective. For solving these problems, we propose the fuzzy modelling and robust control algorithm for hybrind magnetic bearing system. The sufficient conditions for robust controller are obtained in terms of solutions to linear matrix inequalities (LMIs). Simulation results for HMB are demonstrated to visualize the feasibility of the proposed method.

• The Journal of Engineering Geology
• /
• v.12 no.4
• /
• pp.367-378
• /
• 2002

Recently, the number of tunnels on national roads has been increased due to the trend that construction of the large-scaled cut slopes is limited because of the environmental issues. Therefore, the slope failures of tunnel portal have often occurred. The tunnel portal in use has limitations on selection of the countermeasure and construction against slope failure. In the cases of Suanbo hot springs 1 and 2 tunnel portals, seedding was chosen and constructed as the countermeasureof slope failure when the tunnel was first built but collapsed in April, 2002. In this study, the failure sites were examined accurately through the site investigation and an efficient countermeasure according to stability analysis is presented. It is shown that it is very efficient to use resloping for Suanbo hot springs 1 tunnel and concrete buttress, rock anchor to reinforcement countermeasure, and attached rockfall prevention net by dividing the site into 3 sections for Suanbo hot springs 2 tunnel.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.04a
• /
• pp.23-29
• /
• 1993

내부공진 (.omega.$_{3}$ = .omega.$_{1}$ + 2.omega.$_{2}$)을 가진 원판 의 조합공진(.OMEGA. = 2.omega.$_{1}$ + .omega.$_{2}$)응답의 안정성 을 해석한 결과 다음과 같은 결론을 얻었다. 1) 모든 진폭이 0(.alpha.$_{1}$=.alpha.$_{2}$=.alpha.$_{3}$=0)인 공진응답 은 매개변수의 값에 관계없이 안정하다. 2) 모든 진폭이 0이 아닌 (.alpha.$_{1}$.neq.0, .alpha.$_{2}$.neq.0, .alpha.$_{3}$.neq.0) 공진응답은 쌍으로 존재하는데 진폭이 큰 응답(upper branch)은 안정하나 진폭이 작은 응답(lower branch)은 불안정하다. 3) 진폭이 0이 아닌 공진응답이 존재하지 않는 경우에는 선형계와 마찬가지 로 모든 진폭이 0이 공진응답(결과적으로 비공진 응답)이 계의 응답을 지배 하지만 모든 진폭이 0이 아닌 공진응답이 존재하는 경우에는 안정한 공진응 답이 2개이므로 초기조건이 실제의 응답을 결정하게 된다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.5
• /
• pp.582-589
• /
• 2003

This paper presents the robust stability analysis and design methodology of the fuzzy feedback linearization control systems. Uncertainty and disturbances with known bounds are assumed to be included Un the Takagi-Sugeno (TS) fuzzy models representing the nonlinear plants. $L_2$ robust stability of the closed system is analyzed by casting the systems into the diagonal norm bounded linear differential inclusions (DNLDI) formulation. Based on the linear matrix inequality (LMI) optimization programming, a numerical method for finding the maximum stable ranges of the fuzzy feedback linearization control gains is also proposed. To verify the effectiveness of the proposed scheme, the robust stability analysis and control design examples are given.