• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.2
• /
• pp.59-62
• /
• 2008

Purpose: This study was designed to investigate the time-dependent changes of visual acuity after alcohol ingestion. Methods: Both the subjective and objective refraction, distant contrast sensitivity, and three needle tests were carried out at 1 and 3 hours after alcohol ingestion. Results: It was found that the degree of myoptization increased as the blood alcohol level increased in the range of average -0.25D ~ -0.35D when tested 1 and 3 hours after alcohol ingestion. Under the same test conditions the increase in blood alcohol resulted in the reduction in the function of dynamic stereopsis. However, the variation in contrast sensitivity was found to be insignificant for all spatial frequencies. Conclusions: The optician has to be well aware of the fact that alcohol could affect the visual acuity and functional tests, therefore inquiring of the alcohol ingestion prior to visual test can be necessary.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.3
• /
• pp.85-91
• /
• 2005

Radiative heating of a liquid rocket base plane due to plume emission is numerically investigated. Calculation of flow and temperature fields around rocket nozzle precedes and thereby realistic plume shape and temperature distribution inside the plume are obtained. Based on the calculated temperature field, radiative transfer equation is solved by discrete ordinate method. With the sample rocket plume, the averaged radiative heat flux reaching the base plane is calculated about 5 kw/m$^{2}$ at the flight altitude of 10.9 km. This value is small compared with radiative heat flux caused by constant-temperature (1500 K) plume emission, but it is not negligibly small. At higher. altitude (29.8km), view factor between the base plane and the exhaust plume is increased due to the increased expansion angle of the plume. Nevertheless, the radiative heating disappears since the base plane is heated to high temperature (above 1000 K due to convective heat transfer.

• Journal of Korea Game Society
• /
• v.9 no.3
• /
• pp.35-42
• /
• 2009

Analyzing the aspects of pattern in MMORPG that has been leading our domestic game industry to the climax, our game industry might be thought to orient the space narrative storytelling method containing the leading life in the virtual sociality to the nature of society. It is essential to have the convergence and linkage between media in describing the lifestyle in the virtual society, which should be operated in a very flexible manner. It is, however, true that we are lacking of the quantification of designing process until now, although the designing process should have the vivid academic functions between media in advance. In addition, the designing crossing over the MMORPG genre along with the game patterns in the MMORPG genre has close correlations with the spectrum of crises emerging recently in our domestic online game industry. In other words, this essay aims at raising an issue that the selective method to the lifestyle in the virtual society being settled down as characteristics inherent to the methods of our domestic online games might deliver the improving effects through the establishment of game designing jobs and compliant plans.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.6
• /
• pp.117-126
• /
• 2009

Many work-related risk factors can cause construction site hazards. Considering variable and changeable characteristics of construction site, risk of same trade can be different by combination of inherent characteristics. But established safety management has performed like other industries not reflecting characteristics of construction. So, to suggest risk assessment methodology considering risk influence factors in construction site, this study extracts risk influence factors by literature reviews and surveys, builds the weighting system for classification of factors. And risk of trade is calculated based on frequency and severity of risk. Risk assessment methodology is suggested by integrating risk influence factors and risk of trade. From this, risk considering the conditions of construction sites can be derived and based on the derived risk, safety management can be performed more effectively. This study has meaning for assessing the risk which can reflect characteristics of construction site considering risk influence factors.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.540-540
• /
• 2012

강우 발생시 유역에 집수된 물이 하천에 이르는 경로에 따른 유출은 지표유출, 지표하유출, 지하수유출로 구분된다. 정확한 수문순환 과정의 해석을 위해서는 지표 흐름뿐만 아니라 지표하 및 지하수 흐름의 해석이 중요한 실정이나 일반적으로 실무에서 사용되는 강우-유출해석 모형은 지표유출을 해석하기 위한 모형이 대부분이며, 지표하 유출과 침투량을 산정하는데 어려움이 있다. 일반적인 강우-유출해석 모형은 Horton 방법, NRCS 방법, Green-Ampt 방법에 의해 유효우량을 분리하며, 이 과정은 침투량을 직접적으로 모형화 할 수 없으므로 지표 및 지표하, 지하수 흐름을 복합적으로 해석할 수 있는 모형이 질적이나 양적으로 부족한 실정이다. 이러한 지표하 흐름과 침투량을 산정하기 위하여 FE-FLOW, PM, MS-VMS, GMS, GW-VISTAS, ARGUS 및 MODFLOW와 같은 지하수 모형을 사용하고 있다. 본 연구에서는 지표하유출 산정을 위한 침투량의 비교분석을 위해 현재 가장 범용되는 지하수 유동 모델링 프로그램인 Visual Modlfow 모형과 GMS 모형을 이용하여 침투량 산정을 위한 수치 모의를 진행하였다. 각 모형의 입력자료는 2009년 국립방재연구원에서 수행한 침투실험시설 자료를 이용하여 동일한 조건을 부여하고, 두 모형의 비교를 위해 Visual Modflow에서는 MODFLOW의 기본 해석방법인 유한차분법(FDM)을 이용하고, GMS 모형에서는 3차원 유한요소해석이 가능한 GMS-FEMWATER를 이용하였다. 두 모형의 수치모의 조건으로 2009년 국립방재연구원에서 수행한 침투실험방법과 동일하게 공극률에 따른 투수성 보도블럭의 구분과 50mm/hr, 100mm/hr, 150mm/hr, 200mm/hr의 강우강도별 선행함수조건에 따른 수치모의를 진행하였으며, 수치모의된 침투량의 적정성을 판단하기 위하여 국립방재연구원의 침투실험 결과자료와 비교분석하였다. 침투실험 자료와 각각 수치모의된 침투량을 비교분석한 결과 서로 유사한 경향을 보이고 있으나 초기 침투시 상대오차가 비교적 크게 발생하였다. 이는 수치모형의 경우 수리실험과는 다르게 모의시작과 동시에 해당 강우강도의 침투가 시작되므로 초기 유입 유출량 발생시간의 차이가 종료시간까지 누적 침투량에 미치는 것으로 판단되며, 매개변수에 많은 영향을 받는 것으로 판단된다.

• Fire Science and Engineering
• /
• v.20 no.4 s.64
• /
• pp.58-64
• /
• 2006

Smoke extraction in tunnel fire is investigated experimently with thermal model. The object is a immersed tunnel, of which the partial extraction system exists between the tubes. The model tunnel is measured 12 m long, 0.5 m wide and 0.35 m high. The fire is simulated to pool fire and the size corresponds to full scale fire of 5 MW based on Froude modeling. The performance of partial extraction system is determined under two ventilations, natural and longitudinal ones. The results show that compared with longitudinal ventilation, the smoke extraction efficiency of natural ventilation is increased about 30% because of smoke stratification in tunnel. Also the efficiency is identical to the iso-thermal model. The results will be help for activation of the ventilation system in emergency such as in the event of tunnel fires.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.174-174
• /
• 2015

국내의 국지성 집중호우와 같은 기후변화와 토지피복율 증가 등 복합적인 원인으로 인한 표면 유출수의 증가로 도시에서의 내수침수가 매년 빈번하게 발생하고 있다. 이러한 도심지 돌발홍수로 인한 피해에 대한 구조적인 대책으로 지하방수로가 효과적인 방안으로 대두되고 있으며, 현재 신월빗물저류배수시설이 설계단계에 있다. 그러나 미국, 일본 등의 국외의 기설치된 지하방수로에서 발생되는 Geyser 현상으로 인한 피해에 대한 연구는 국외에 비해 미비한 편이므로, 선행적으로 Geyser에 대한 물리기반의 동수역학적인 이해가 필요한 실정이다. Geyser는 홍수 시 급격한 유량의 유입으로 단파가 발생하여 지하방수로 내 공기의 압축이 발생하고 수직관을 통해 공기가 물과 함께 지상으로 분출되면서 발생된다. 따라서 공기와 물의 혼합 유동을 모의해야 하며 동시에 단파의 불연속성을 모의하기 위해서는 기존의 상용프로그램으로는 다소 어려움이 있다. 이에 본 연구에서는 지하방수로의 Geyser 현상의 발생 예측을 위해 1차원 Saint-Venant 방정식을 지배방정식으로 선정하였으며, 단파 발생을 수치적으로 안정적으로 모의하기 위해 Roe Approximate Riemann 수치기법을 사용하였다. 또한 공기의 압력항을 고려하기 위해서 수정된 형태의 Preissmann slot 모형을 적용하였다. Geyser 현상의 영향인자로서 지하방수로 수평관의 직경, 마찰계수, 바닥경사, 초기수위, 유입유량을 고려하였으며 상류에서 유입되는 유량에 의한 하류에서의 동수역학적 거동을 분석하였다. 5개의 영향인자의 변화에 따른 단파의 유입속도 및 공기부 압력의 변화를 관찰하여 Geyser 현상에 대한 동수역학적 검토를 수행하였다. 추후 본 연구결과를 적절히 활용한다면 지하방수로의 사용 안정성을 확보하고, 홍수발생 시 모니터링 인자도출에 도움이 될 것으로 예상된다.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.6
• /
• pp.469-474
• /
• 2018

As urban population increases, research on urban environmental noise is getting more attention. In this study, we classify the abnormal noise occurring in traffic situation by using a deep learning algorithm which shows high performance in recent environmental noise classification studies. Specifically, we classify the four classes of tire skidding sounds, car crash sounds, car horn sounds, and normal sounds using convolutional neural networks. In addition, we add three environmental noises, including rain, wind and crowd noises, to our training data so that the classification model is more robust in real traffic situation with environmental noises. Experimental results show that the proposed traffic sound classification model achieves better performance than the existing algorithms, particularly under harsh conditions with environmental noises.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.1
• /
• pp.33-45
• /
• 2019

In this study, numerical simulations were performed to investigate the steady-state characteristics of a symmetric pintle nozzle by varying the position of the pintle and the altitude. The pintle nozzle shape was used in a linear pintle nozzle that had been analyzed prior to the study, and the boundary conditions of the chamber were considered to be according to the propellant burn-back characteristics. A software was used to perform a verification analysis of the square nozzle, pintle nozzle, and high-altitude conditions with an appropriate analytical technique. The pintle position had three different nozzle throat area conditions-: fully closed, half open, and fully open, and the altitude was set at 0, 5, and 20 km. The study compared the thrust, pintle drive load, and static stability at each condition.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.11
• /
• pp.883-891
• /
• 2018

In this paper, aerodynamic noise simulation was conducted using DES (Detached Eddy Simulation) and FW-H (Ffowcs Williams and Hawkings) acoustic analogy for the tandem cylinders which have configuration similar to a landing gear of airplanes. Numerical simulation for the tandem cylinders whose centers are 3.7D apart was carried out and results were compared with the measured data such as flow characteristics, pressure coefficients on the cylinder surfaces and far-field noise characteristics. It was confirmed that periodically shedded vortices released at the upstream cylinder and impinged on the downstream cylinder surface are major sources of aerodynamic noise. After verifying the computational method of using DES and FW-H acoustic analogy for predicting aerodynamic noise of tandem cylinders, additional simulation was conducted to examine the effect of attaching a splitter plate at the rear of the upstream cylinder. It was confirmed that the noise level in specific frequency band decreased significantly because the splitter plate changed the vortex shedding features and reduced dipole noise source.