• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.495-499
• /
• 2003

As an alternative to overcome the limitations of current popular schedule system such as Bar Chart, PERT, CPM in proving the feasibility of a given project schedule and duration, this research applies simulation to the 'Shiwha Techno-Valley project, and then reviews its usability in time management. Shiwha-Techno-Valley is a gigantic project requiring large number of equipment and resulting in traffic congestion. In particular, project site is located near the Shiwha industrial complex and Daeboo-Do tourist place. Therefore, current traffic needs should not be ignored. This research evaluates whether the project can be finished in a given time even if construction equipment increase in addition to the current traffic. Through the analysis of the simulation output, the research identifies the optimal resource input and the needs on alternative schedule for the project.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.1 no.3
• /
• pp.41-48
• /
• 2010

In this paper, the analysis of impact damage behavior of a reinforced concrete structure that undergoes both a shock impulsive loading and an impact loading due to the air blast induced from an explosion is performed. Firstly, a pair of multiple loadings are selected from the scenario that an imaginary explosion accident is assumed. The RC structures strengthened with advanced composite materials (ACM) are considered as a scheme for retrofitting RC wall structures subjected to multiple explosive loadings and then the evaluation of the resistant performance against them is presented in comparison with the result of the evaluation of a RC structure without a retrofit. Also, in order to derive the result of the analysis similar to that of real explosion experiments, which require the vast investment and expense for facilities, the constitutive equation and the equation of state (EOS) which can describe the real impact and shock phenomena accurately are included with them. In addition, the numerical simulations of two concrete structures are achieved using AUTODYN-3D, an explicit analysis program, in order to prove the retrofit performance of a ACM-strengthened RC wall structure.

• Economic and Environmental Geology
• /
• v.42 no.6
• /
• pp.619-626
• /
• 2009

The price fluctuation of minerals are commonly occurred through the change of market condition, and the redevelopment of closed mines are usually happened if commercial requirement can be satisfied. After 2003, as the price of most of metals increased very rapidly, Korea government tried to find the possibility of reopening for some closed metal mines. The purpose of this article is to suggest the proper ways how effectively to regulate the mine pollution concerning the redevelopment of closed mines. For this work, with the recent price trends of metals and reopening possibility of closed metal mines in Korea were reviewed. And analysing the problems of regulations for the mine development permission and mine pollution control and reclamation process of Korea, several amendments of environmental and mining regulation regimes for redevelopment of closed mines were proposed.

• Archives of design research
• /
• v.20
• /
• pp.265-276
• /
• 1997

I intend to grope for the desirable outdoor color environment creation plan through researching situation of our apartment houses color environment and grasping the point at issue. The rearch was made that Ilsan(16 items) new city apartment were selected and the color seperately measured such as the dominant, the aid, the accent colors through applied color component ratio was researched by calculating square measure of matched colors and through that the evaluation of apartment complex color environment was formed. The planned construction problems were issued from comparing the planned scheme and the present carrying color status guide by investigating the color plan applied Ilsan new city. The current out apartment outdoor color environment is poor, and the color plan of the early stage has many insufficient parts and many operation errors. For the creation of desirable color environment, the color plan establishment by regional characteristics, the color environment management, though exhaustive color consultation, and the external construction technique improvement, the standard color sheet diffusion, the color understanding of architects, the public relations (P.R), the education on the importance of color are required.

• Korean Management Science Review
• /
• v.33 no.3
• /
• pp.53-64
• /
• 2016

The government is mapping out R&D innovation measures aimed at improving the qualitative level of the performance of national R&D projects that are supported by grants or public funds. This paper proposes ways of making improvements in technology planning, project assessment, performance management, and results evaluation in order to boost the efficiency of the country's promotion of ICT R&D projects, as well as to upgrade the processes involved with its technological innovation system at each of the commercialization stages of its R&D projects. According to our experts' in-depth survey and interview, it has been found that technology planning is the most important phase in the full cycle-based technological innovation system and that the promotion of a combination of top-down and bottom-up approaches is the most reasonable. This paper also suggests it is necessary to secure a process for exploring technological opportunities as the preparatory phase for technology planning, and that it is desirable to reflect the technology demand map associated with the technology road map. Currently, R&D projects are divided into policy designation, designation contest, and free contest. To minimize the inefficiency associated with indiscriminate competition, this paper proposes the introduction of a general contest system in order to change the project assessment system into one based on the results of the competition in each category(e.g. firms, universities, research institutions, etc.).

• The Journal of Korean Society for Radiation Therapy
• /
• v.14 no.1
• /
• pp.89-94
• /
• 2002

During radiation therapy with electron beam to eyelid, we must keep the minimal dose on eyeball as possible. especially in the treatment of Sebaceous gland carcinoma, Squamouse cell ca., and basal cell ca. of eyelid and low grade MALToma etc. But if radiation field covered the upper & lower eyelid, it makes a cataract on lens of treated eye, in late complications. Now we reports the advantages of Tungsten eyeball shielding block compare to previously used lead block. with BOLX-I material, we made a eyeball model and measured the absorbed dose of 6MeV & 9MeV electron hem at 6 point of eyeball model with TLD chip. And compare the absorbed dose to previously lead block and other types of Tungsten eyeball shielding block.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.4
• /
• pp.525-530
• /
• 2006

Recently companies which do not use the heavy metals such as lead, chrome, mercury to the electronic goods and alternate the materials environment-friendly are increasing. In advanced country, lead-free solder without lead is developed and soldering process almost disappeared. The lead-free solder is environment-friendly but is expensive and lack of tack and durability than lead, the improvement is necessary. To solve this problem, the welding process that uses TIG welding and the welding technology between different kind metals for lead-in wire of room lamp and base department was developed. To do this, previous room lamp manufacturing process was analysed and which process can be alternate was proposed. And the test for selection of optimal value of TIG welding parameter was done. Finally the lamp aging test and earthquake resistant test was done to check the reliability of welded room lamp.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.1
• /
• pp.14-22
• /
• 2001

Off-line handwritten numeral recognition is a very difficult task and hard to achieve high recognition results using a single feature and a single classifier, since handwritten numerals contain many pattern variations which mostly depend upon individual writing styles. In this paper, we propose handwritten numeral recognition system using hybrid features and combined classifier. To improve recognition rate, we select mutually helpful features -directional features, crossing point feature and mesh features- and make throe new hybrid feature sets by using these features. These hybrid feature sets hold the local and global characteristics of input numeral images. And we implement combined classifier by combining three neural network classifiers to achieve high recognition rate, where fuzzy integral is used for multiple network fusion. In order to verify the performance of the proposed recognition system, experiments with the unconstrained handwritten numeral database of Concordia University, Canada were performed. As a result, our method has produced 97.85% of the recognition rate.

• The Journal of the Korea Contents Association
• /
• v.18 no.3
• /
• pp.390-398
• /
• 2018

The purpose of this study is to analyze the actual operation status of the financial performance target management system which is currently operated and to provide improvement plan based on this analysis. For this purpose, I examined the performance management system and performance indicators of the Ministry of Justice, which is one of the criminal justice administration agencies. Although the overall appropriateness of the current performance management system is considered to be somewhat appropriate as a whole, there is a negative perception about the performance measurement method for measuring the achievement of the performance target, and the evaluation of the performance of the performance target is relatively low. In addition, there were many criticisms about the establishment and measurement of the Ministry of Justice's overall performance indicators, such as the tendency to select indicators that are easy to achieve and easy to measure. In order to remedy these problems, it was highly suggested that the importance of indicators should be more emphasized and expanded so as to set up high-performance indicators. Based on the results of this analysis, some suggestions for policy implications and some alternatives for improvement of financial performance target management system were suggested.

• Journal of Navigation and Port Research
• /
• v.43 no.6
• /
• pp.335-343
• /
• 2019

As the regulations of ship exhaust gas have been strengthened recently, many measures are under consideration to reduce fuel consumption. Among them, research has been performed actively to develop a machine-learning model that predicts fuel consumption by using data collected from ships. However, many studies have not considered the methodology of the main parameter selection for the model or the processing of the collected data sufficiently, and the reckless use of data may cause problems such as multicollinearity between variables. In this study, we propose a method to predict the fuel consumption of the ship by using the principal component analysis to solve these problems. The principal component analysis was performed on the operational data of the 13K TEU container ship and the fuel consumption prediction model was implemented by regression analysis with extracted components. As the R-squared value of the model for the test data was 82.99%, this model would be expected to support the decision-making of operators in the voyage planning and contribute to the monitoring of energy-efficient operation of ships during voyages.