• Title/Summary/Keyword: 선의권

Search Result 43, Processing Time 0.024 seconds

컨테이너터미널 장치장에서 외부트럭 인터페이싱 방법에 따른 효율성 평가에 관한 연구

  • Choe, Hyeong-Rim;Gwon, Hae-Gyeong;Son, Jeong-Rak;Lee, Ho-In;Sin, Jung-Jo;Lee, Ho-Jun
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2009.06a
    • /
    • pp.187-188
    • /
    • 2009
  • 초대형 컨테이너선의 출현 이후 각국의 항만들은 메가 허브 포트가 되기 위하여 첨단기술을 컨테이너터미널 업무에 적용하는 등 효율성과 생산성 향상을 위한 노력에 박차를 가하고 있다. 컨테이너터미널에서는 게이트, 야드, 안벽 업무로 나누어져 있으며, 이들 업무간의 효율성 향상을 위해서는 각 업무들 간에 인터페이스가 원활하게 유지되어야 한다. 현재 컨테이너터미널의 야드 업무에서는 외부차량과의 인터페이스를 원활하게 하기 위해서 바코드를 이용한 키오스크 기반 외부트럭 인터페이스를 사용하고 있으나 변화해가는 항만 환경 속에서 좀 더 효율적인 야드 업무 처리를 위해서는 신기술이 적용된 외부트럭 인터페이스가 개발되어야 할 필요가 있다. 본 연구에서는 최근 컨테이너터미널 야드 업무에서 외부트럭과의 인터페이싱 방안으로 활발하게 적용되고 있는 RFID 기반 외부트럭 인터페이스와 기존 사용되고 있는 키오스크 기반 외부트럭 인터페이스를 비교 분석을 통하여 효율성을 평가하고자 한다.

  • PDF

The Analysis of Temperature on Superconducting Parallel Bifilar Winding (초전도 병렬 무유도권선의 온도 해석)

  • Oh, Yun-Sang;Lee, Sang-Jin;Bae, Joon-Han;Ko, Tae-Kuk
    • Proceedings of the KIEE Conference
    • /
    • 1995.07a
    • /
    • pp.134-136
    • /
    • 1995
  • A superconducting parallel bifilar winding shows the phenomenon which is known as 'fast quench'. We analyzed the temperature characteristics on the winding by computer simulation, and confirmed theses by experiment. The temperature of the quenched point rose gradually as the source voltage was increased. The temperature changed radically as first, but had a gentle slope after a few milliseconds. As the source voltage was large, the initial quenched length also increased. The points in this quenched length showed almost the same temperature. but the points where initial quench had not occurred showed radical temperature gradient. We could observe that the temperature of the whole wire increased simultaneously as the fast quench occurred on the superconducting parallel bifilar winding, because a number of quenched points in that wire appeared at the same time.

  • PDF

A Study on the legal position of the carrier under the right of stoppage in transit of CISG (국제물품매매계약(CISG)의 운송유보권 하에서 운송인의 법적지위에 관한 연구)

  • Lim, Jaewook
    • International Commerce and Information Review
    • /
    • v.16 no.3
    • /
    • pp.159-182
    • /
    • 2014
  • CISG Article 71 (1) states that a party may suspend the performance of his obligations if, after the conclusion of the contract, it becomes apparent that the other party will net perform a substantial part of his obligations as a result of a serious deficiency in his ability to perform or in his creditworthiness or his conduct in preparing to perform or in perfoming the contract. CISG Article 71 (2) states a 'right of stoppage in transit' that if the seller has already dispatched the goods before the grounds described in the preceding paragraph become evident, he may prevent the handing over of the goods to the buyer even though the buyer holds a document which entitles him to obtain them. The present paragraph relates only to the rights in the goods as between the buyer and the seller. Under the right of stoppage in transit, the carrier copes with risks that the seller may claim damages arose from the handing over the goods, if he hand over the goods to the buyer and that the buyer may claim damages, if he deny handing over the goods to the buyer who has the document which entitles him to obtain the goods. Therefore the legal position of the carrier may become weak. This paper purpose to point out the legal weakness of the carrier under the right of stoppage in transit and to provide the proper legal act of the carrier and possible practice related to various characters of the contract of sale of the goods. Although there is the opinion it prevent from handing over the goods to the buyer actually under the interpretation that the buyer should take claim damages to the seller, if the goods are handed over to the buyer under the right of stoppage in transit, it is not appropriate because the opinion may disable the right of stoppage in transit. The right of stoppage in transit could be carried out under any payment conditions except letter of credit and under any mode of transportation except the cases that carrier is the buyer himself or the agent of the buyer. It could be executed regardless the forms of the transport document.

  • PDF

Papers : Improvement of Tracking Performance for Re - Entry Trajectory via the Disturbance Observer (논문 : 외란 관측기를 이용한 대기권 재진입 궤적 추종성능 향상)

  • Lee,Dae-U;Jo,Gyeom-Rae
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.30 no.1
    • /
    • pp.75-81
    • /
    • 2002
  • In the re-entry comtrol system, errors apt to induce because the time deriviative of drag acceleration is analytically estimated. Still more, the difficulty of estimation of th exact drag coefficient in hypersonic velocity and the non-reality of the scale height cause a steady-state drag errer. In the Space-Shuttle, a steady-state drag error is reduced by the addition of the integral term of drag acceleation error into the control system. This method, however, induces a difficulties in respect to the modern controller composition due to the multi-poles in a closed-loop system. Thus, this paper proposes the additional method of the disturbance observer. This reduces the steady-state drag error according to the following by the analytic calculation, and then creates the new drag acceleration time derivative using the estimated error. The performance of the re-entry control system is verified about 32 refernce trajectories.

A Manufacturing Execution System for LNG Tank Fabrication shop in Shipbuilding (조선 LNG 탱크 제작 공장의 제조실행 시스템 개발)

  • Lee, Sang-Hyeop;Lee, Byeong-Yeol;Kim, Dong-Hyeon;Gwon, Bong-Jae;Jeong, Mun-Yeong;Ryu, Sang-Hun;Eom, Seong-Suk
    • Proceedings of the Korean Operations and Management Science Society Conference
    • /
    • 2004.05a
    • /
    • pp.463-466
    • /
    • 2004
  • 본 연구는 조선 LNG선의 탱크를 제작하는 공장의 관리 및 운영을 지원하는 제조실행 시스템(MES : Manufacturing Execution Sys- tem)의 개발에 대한 내용이다. 본 연구대상 공장에는 가공과 조립라인이 있으며, 가공라인에서는 소재를 가공하고, 조립라인에서는 가공된 소재를 가공하고, 조립라인에서는 가공된 소재를 용접으로 최종 조립한다. 본 연구 대상 공장의 주요 관리 및 운영에 대한 관점은 장비의 고장 방지와 효율극대화, 납기 준수 및 최종 용접 후 결함 최소화 등이다. 이에 본 연구에서는 공장을 체계적으로 관리 운영하기 위해 공정관리와 장비관리 기능을 통합한 제조실행 시스템을 개발하였다. 공정관리는 일정계획 수립, 관리에서부터 작업자 배치 및 입${\cdot}$출고 관리 등의 역할을 수행하고, 장비관리는 장비 모니터링, 장비와 작업 이력 데이터 추출 및 집계, 장비보전 관리, 장비별 작업지시 등의 역할을 수행한다. 본 연구의 개발 시스템은 MSSQL Sever 데이터베이스와 Visual Basic, C++ Builder로 개발되었다.

  • PDF

Migration of K-wires from the Acromioclavicular Joint to the Neck - Case Report(2 cases) - (견봉 쇄골 관절 탈구에 사용된 K-강선의 경추부로의 이동 - 증례보고(2예) -)

  • Lee, Woo-Seung;Kim, Taik-Seon;Yoon, Jeong-Ro;Kim, Young-Bae;Seo, Dong-Hoon;Kwon, Jae-Ho
    • Clinics in Shoulder and Elbow
    • /
    • v.9 no.2
    • /
    • pp.196-201
    • /
    • 2006
  • We report two cases of migration of K-wires from the acromioclavicular joint to the neck. A 73-year-old man complained of right shoulder pain for one month and had undergone orthopedic surgery because of acromioclavicular joint dislocation about 27 years earlier. Another 56-year-old man complained of left shoulder pain and neck pain for 5 years and had undergone orthopedic surgery because of acromioclavicular joint dislocation about 25 years earlier. In both cases, we took X-rays to look for the cause of shoulder pain and discovered broken and migrated K-wires in the neck. We removed the K-wires from the trapezius muscle and the paraspinal muscle respectively. K-wire fixation technique is simple and effective but should be followed up with X-rays periodically. In addition, we should warn patients of the possibility of migration of K-wire. And it is desirable for us to avoid using K-wire near major neurovascular structures like the sternoclavicular joint and the clavicle.

Modelling the Subway Demand Estimation by Station Using the Multiple Regression Analysis by Category (카테고리별 다중회귀분석 방법을 이용한 지하철역별 수요 추정 모형 개발)

  • Shon, Eui-Young;Kwon, Byoung-Woo;Lee, Man-Ho
    • Journal of Korean Society of Transportation
    • /
    • v.22 no.1 s.72
    • /
    • pp.33-42
    • /
    • 2004
  • 지하철역별 수요는 개통 후 경과 연도에 따라서 S자 형태로 증가한다. 즉 개통 초기에는 잠재되어 있던 지하철 수요가 시간의 경과에 따라 계속적으로 증가하다가, 개통 후 10$\sim$13년 정도가 경과하면 최대를 나타낸 후 거의 정체하는 현상을 보인다. 그러나 지금까지 지하철 수요를 추정하기 위해서 이용되었던 4단계 모형은 이러한 지하철 수요의 증가 추세를 반영할 수 없기 때문에 실제 수요와 많은 차이를 보였다. 따라서 본 연구에서는 이러한 문제를 해결해 보고자 서울시 지하철 2$\sim$8호선의 실제 수요를 토대로 지하철역별 수요, 특히 순수한 승차인원을 추정하는 모형을 개발하였다. 모형에 적용되는 함수식은 실제 지하철역별 수요와 가장 유사한 형태를 보이고 있는 로지스틱 함수식을 이용하였다. 또한 각각의 지하철역별로 나타나는 상이한 특성은 카테고리로 분류하여 모형에 반영하였다. 카테고리는 토지이용도, 사회경제활동의 규모, 그리고 지하철역의 특성에 따라 분류하였다. 각 카테고리별 특성을 대표하는 독립 변수로 인구 종사자수, 학생수와 개통 후 경과 연도 등을 선정하였다. 그 결과 카테고리별로 추정된 지하철역별 수요는 통계적으로 매우 유의한 것으로 나타났다. 본 연구는 지하철역별로 승차하는 순수한 수요를 보다 정확하게 추정하기 위한 모형을 개발하는 것이 주된 목적이다. 반면에 본 모형을 이용하여 지하철역별 하차 수요 및 횐승 수요를 추정하는 것은 어렵다. 따라서 기존에 지하철 수요를 추정하는 데에 가장 많이 사용된 4단계 모형과 접목하여야 하며, 이에 대한 방안도 본 연구에서 제시하였다.

Modeling the Distribution Demand Estimation for Urban Rail Transit (퍼지제어를 이용한 도시철도 분포수요 예측모형 구축)

  • Kim, Dae-Ung;Park, Cheol-Gu;Choe, Han-Gyu
    • Journal of Korean Society of Transportation
    • /
    • v.23 no.2
    • /
    • pp.25-36
    • /
    • 2005
  • In this study, we suggested a new approach method forecasting distribution demand of urban rail transit usign fuzzy control, with intend to reflect irregularity and various functional relationship between trip length and distribution demand. To establish fuzzy control model and test this model, the actual trip volume(production, attraction and distribution volume) and trip length (space distance between a departure and arrival station) of Daegu subway line 1 were used. Firstly, usign these data we established a fuzzy control model, nd the estimation accuracy of the model was examined and compared with that of generalized gravity model. The results showed that the fuzzy control model was superior to gravity model in accuracy of estimation. Therefore, wwe found that fuzzy control was able to be applied as a effective method to predict the distribution demand of urban rail transit. Finally, to increase the estimation precision of the model, we expect studies that define membership functions and set up fuzzy rules organized with neural networks.

A Study on Enacting the Radiologic Technologist Act for the Civil Right to Health in Korea (건강권과 방사선사법 제정에 관한 고찰)

  • Lim, Chang-Seon
    • Journal of radiological science and technology
    • /
    • v.30 no.4
    • /
    • pp.313-320
    • /
    • 2007
  • There are the Medical Radiation Health and Safety Act(the Patient Radiation Health and Safety Act, the Radiologic Technologist Act), the Medical Laboratory Technologist Act, the Physical Therapy Practice Act, and the Dental Hygienist Act, etc in America. However, Korea has only one Act for a medical radiologic technologist(including radiation therapy technologist, nuclear medicine technologist), medical laboratory technologist, physical therapist, occupational therapy examiner, dental hygienist, and so on. It is the Medical Technologist Act. Therefore, the Medical Radiation Health and Safety Act for a radiologic technologist(including radiation therapy technologist, nuclear medicine technologist) has to be enacted independently in Korea. It is the purpose of this Act to provide for the appropriate certification of persons using radioactive materials, equipment emitting ionizing radiation on humans or performing medical imaging for diagnostic and therapeutic purposes. In Korea, the radiologic technologist is a "fusion technologist" who is a person other than a licensed practitioner as a radiographer, radiation therapist, nuclear medicine technologist, computed tomography technologist, magnetic resonance technologist, mammographer, sonographer, medical dosimetrist, quality management technologist, etc. This Act will have some provisions related to the definitions, reserved title, scope of practice, specialized technologist, application for licensure, radiologic technology council, renewal, continuing education, the radiation control advisory commission, etc. This Act will ensure that quality radiation therapy treatments are delivered and that quality diagnostic information is presented for interpretation, which will lead to accurate diagnosis, treatment and cure. Accurate diagnosis can be provided only when a personnel is properly educated in technique, equipment operation and radiation safety. In the end, this Act will protect the civil right to health. By regulating the personnel responsible for performing those procedures, this Act will mean improved care for patients-higher quality images, improved accuracy, and less exposure to radiation.

  • PDF

A Research on Improvement Measures for Safety Management of Aviation Cosmic Radiation (항공부문 우주방사선의 안전관리 적용을 위한 개선연구)

  • Choi, Sung-Ho;Lee, Jin;Kim, Hyo-Joong
    • The Korean Journal of Air & Space Law and Policy
    • /
    • v.31 no.2
    • /
    • pp.215-236
    • /
    • 2016
  • This paper is related to a study on safety management of cosmic radiation in the aviation area, and as a comprehensive study encompassing not only aviation crew but also aviation traffic users, presents issues on an exposure to the cosmic radiation which authors predict may be intensified in a time to come. Although the government of the Republic of Korea has recently activated regulations related to the cosmic radiation, the following improvement measures are further urged to be carried out not only as a regulatory improvement for pushing ahead with effectiveness but also as a supplementary tool. Firstly, a dose limit corresponding to the international standard needs to be applied. Since the dose limit imposed by the Korean government is improperly higher than the international dose limit of the cosmic radiation, the present dose limit needs to be re-established in a range of "not exceeding the international recommendation". Secondly, a new methodology is needed such that aviation companies observe a yearly effective dose limit of passengers. A fact that only aviation crew is specified but passengers are excluded in the related regulation is based on a recommendation presented by the International Commission on Radiological Protection (ICRP). According to the recommendation, Korean government excluded passengers in the "Cosmic Radiation Safety Requirements for Crew". Among the present aviation regulations, there exists a protection standard for protecting aviation traffic users. However, it presents a damage protection only for ticket-related issues. Since this regulatory weakness provides a cause of endangering national health, the authors believe that an improvement in the regulation is needed without sticking to the recommendation from the ICRP. To this end, new regulations are strongly demanded from aspects of not only legal but also regulatory areas. The dose limit in accordance with the international standard is established. However, at least a minute amount of cosmic radiation is continuously acting on all people of Korea. Since more and higher level of cosmic ration may exist in the aviation space, an improved method of representing the minute amount of cosmic radiation in figures. As a result, a desirable regulation may be established for protecting not only crew but also aviation traffic users from being exposed to the cosmic radiation via a legislation of the desirable regulation.