• Title/Summary/Keyword: 선부하

Search Result 546, Processing Time 0.023 seconds

A study on the neutral line compensator for prevention of rising at load voltage instantly when disconnect the neutral line in 3phase 4 line system (3상 4선식 배선의 중성선에 탈락시 부하 전압 상승 방지를 위한 중성선 보상기에 관한 연구)

  • Kim, Hyun-Woo;Baek, Dong-Hyun
    • Proceedings of the Korea Institute of Fire Science and Engineering Conference
    • /
    • 2011.11a
    • /
    • pp.522-525
    • /
    • 2011
  • 3상 4선식 배선 라인에서 중성선이 탈락할 경우 부하측의 중선선에 연결된 일부의 부하측 전압은 급상승하게 되고 이로 인한 피해가 많으므로 본 연구에서는 배전라인의 점검시 또는 접촉 불량에 의하여 발생할 수 있는 중성선의 탈락을 순간 감지하고 이를 보상하여 별도로 중성선을 생성하여 새로운 중성선을 순간 제공함으로서 중성선 탈락에 의한 피해를 최대한 억제하고자 하는 것이다. 이로 인하여 부하측의 전압상승에 의한 전기적 재해를 사전에 미리 예방이 가능한 효과도 있게 된다.

  • PDF

A Study of Optimal Modem Algorithm According to Various Channel Fluctuations (디지털 가전채널 변동특성을 반영한 최적 변복조 시스템에 관한 연구)

  • Cha, Jae-Sang
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.20 no.3
    • /
    • pp.20-27
    • /
    • 2006
  • Power line for digital home appliances has own property that transmitting power connected to loads. Especially, power line communication(PLC) for the home network which has characteristics of load fluctuation makes variable noise characteristics. It becomes serious problems to maintain efficient communication performance. Thus, in this paper, we present an optimal modulation and demodulation method through mathematical analysis of each measured load fluctuation based on PLC for home appliances. To analyze and compare various modem methods presented in this paper, we analyzed them normally via computer simulation under various noise channel environments according to various load fluctuations. In addition, we certified its availability through hardware implementation.

Effect of Short Termed Fasting on the Usage Patterns of Metabolic Energy Sources during Exercise in Man (사람에 있어서 단기간의 절식이 운동에너지원의 이용양상에 미치는 영향)

  • Kim, Jang-Y.;Lee, Yang-M.;Lee, Suck-K.
    • Journal of Yeungnam Medical Science
    • /
    • v.3 no.1
    • /
    • pp.269-278
    • /
    • 1986
  • The purpose of this study was to know the effect of shourt termed fasting on the usage of metabolic energy sources and the metabolic differences between non-athletic and athletic subjects. Subjects were divided into non-athletic and athletic group and exercise was loaded on both groups after feeding and fasting. Exercise was loaded by a treadmill running at the speed of 8km/hour for 30 minutes in both groups. The experiment yielded following results. In the fed state, the level of plasma FFA increased markedly after 15 and 30 minutes of exercise compared with it's level of pre-exercise period in both groups. In the fasted state, the level of plasma FFA in non-athletic group increased steadily according to the duration of exercise, while it's level in athletic group showed no changes. At pre-exercise period, the level of plasma FFA was higher in fasted state than fed state. Immediately before the exercise and 15 and 30 minutes after the exercise, blood for the determination of plasma free fatty acid(FFA), glucose, triglyceride(TG)and cholesterol was sampled from antecubital vein, and simultaneously heart rate was measured. In the fed state, the level of plasma glucose was increased mildly according to exercise, and in the fasted state it's level increased according to exercise in both groups also. In the fasted state, the level of plasma TG was lower than that in the fed state. The level of plasma TG and cholesterol in the fed state was no changed by the exercise from the pre-exercise period. The level of plasma cholesterol in athletic group had tendency to lower than that in non-athletic group. Heart rate increased markedly according to exercise in both groups, but the athletic group's increasing rate of heart rate was lower than the non-athletic group's heart rate increased according to exercise and athletic groups heart rate increased early period of exercise, but did not change during lates post-period of exercise.

  • PDF

A Channel modeling and analysis of Indoor power cable for UWB communication system (구내용 전력케이블기반의 UWB통신용 채널특성분석에 관한 연구)

  • Cha, Jae-Sang;Jeong, Jae-Ho;Kim, Dae-Sik;Kim, Hyo-Jin;Moon, Kyung-Hwan;Lee, Jong-Joo
    • Proceedings of the KIEE Conference
    • /
    • 2006.07e
    • /
    • pp.78-80
    • /
    • 2006
  • 전력계통망 및 수용가는 다양한 형태의 전력케이블 및 전력선이 연계된 분 배전망을 형성하고 있다. 특히, 이렇게 구성된 분 배전망은 하나의 전력계통으로서 연계된 전력망을 형성하고 있으며, 이를 전력선통신의 인프라로 활용할 수 있다. 최근 들어, 전력선통신 기술에 대한 연구가 활발히 진행되고 있으며, 계통에 연계된 부하와 분기선로 그리고 매질의 특성에 따라 통신환경이 달라진다. 특히 전송 주파수에 따른 신호의 감쇠, 연계된 부하의 종류와 이들 부하로 인한 잡음원의 유입 및 전송신호의 왜곡 등이 주요한 채널환경 요소이다. 본 논문에서는 상기 나열한 한계점을 극복하기 위한 대안으로 전력선 및 케이블의 매질특성을 평가하고, 이에 따른 전송신호의 영향을 분석, 연계된 다양한 부하들의 변동에 따른 통신환경의 변화 영향 그리고 통신성능에 미치는 영향을 분석하였으며, 또한 전력 케이블 및 선로의 특성과 부하변동 특성을 반영하여 구내용 전력케이블 기반의 UWB(Ultra Wide Band) 통신용 채널 환경을 모델링하는 방안을 제안하고자 한다.

  • PDF

A study on the load management by using Power Line Communication (Power Line Communication을 이용한 부하관리에 관한 기초연구)

  • Park Jae Ho;Hong Seung Man;Rho Dae Seok
    • Proceedings of the KIEE Conference
    • /
    • summer
    • /
    • pp.263-266
    • /
    • 2004
  • 전력선 통신은 전기공급을 위해 기존에 설치되어 있는 전력선을 그대로 이용하는 것으로 통신망을 새롭게 설치할 필요가 없다는 편의성 및 경제적 잇점을 가지고 있다. 최근 전력선 통신 기술을 이용하여 조명제어, 침입탐지와 같은 방범, 가스원격 차단과 같은 방재, 냉난방기기의 제어와 같은 흠오토메이션, 자동원격 검침, 원격모니터링에 적합한 기술로 주목받고 있다 특히 전력선 통신을 이용한 홈네트워크의 구축도 가능할 것이다. 본 논문에서는 전력선 통신의 등장배경과 정의, 핵심기술을 알아보고, 간단한 모뎀과 사용자인터페이스를 제작하여 간단한 부하를 제어함으로써 차후 전력선 통신을 이용하여 가정내 또는 사업체에서의 부하관리의 가능성을 연구하였다.

  • PDF

A study on the channel modeling for power line communication (전력선 통신 채널 모델링에 관한 연구)

  • Jeong Young-Hwa
    • The Journal of Information Technology
    • /
    • v.6 no.3
    • /
    • pp.1-10
    • /
    • 2003
  • This paper is concerned with a power line channel modeling for the more fast and efficiently power line communication experiment. A capacitor load channel simulator is a essential equipment in the power line modem development for in-house network. We accomplished a channel modelling by the frequency response method about the total 298 capacitor load channels. This channel data is acquired by the capacitor load simulator modeling a real power line channel environment. When the experiment results acquired from the capacitor load simulator were compared with the result from a channel filter, we confirmed to substitute capacitor load experiments on the actual power line communication without big error.

  • PDF

A channel-coding based SS-PLC system using new measured impluse noise model (새로운 실측 임펄스 잡음 모델을 반영한 채널코딩 기반의 대역확산 전력선 통신시스템)

  • Moon, K.H.;Shin, M.C.;Lee, J.J.;Choi, S.Y.;Park, K.W.;Cha, J.S.
    • Proceedings of the KIEE Conference
    • /
    • 2005.07a
    • /
    • pp.72-74
    • /
    • 2005
  • 전력선통신은 현재 홈 네트워크 및 검침기술과 같은 다양한 분야에서 활발하게 응용이 되고 있는 기술이다. 이러한 전력선 통신을 위한 전송선로는 통신을 위한 정보데이터를 전송하는 기능과 더불어 선로상의 전력 부하들을 위한 전력 공급용으로서의 용도도 가지고 있다. 그러므로 선로상의 부하변동은 다양한 형태의 임 펄스 잡음을 야기 시키고 이러한 임펄스성 잡음은 전송 데이터에 군집에러를 발생시킴으로써 통신성능을 크게 열화 시키는 요인이 되고 있다. 따라서 효율적인 전력선 통신시스템을 위해서는 전력 선로상의 임펄스 잡음의 특성을 명확히 분석하고, 그에 따른 에러제거기법을 적용하는 것이 필수적이라고 할 수 있다. 이러한 관점에서 본 논문에서는 새롭게 가정의 전력 선로에 연결되는 부하들의 동작 및 변동에 따른 임펄스 잡음 특성을 다양한 부하의 유형별로 디지털 하드웨어를 이용하여 실측 및 분류한 후, 새롭게 도출한 임펄스 잡음 모델을 기반으로 순방향 오류정정방식(FEC;Forward Error Correction)인 컨벌루션 부호화(Convolution Coding) 및 인터리빙(Interleaving) 방식을 가미하여 시스템의 비트오율 개선효과를 확인하였다. 본 논문에서 수행된 새로운 실측기반의 임펄스 잡음이 반영된 채널부호화 방식에 의한 성능평가 결과는 향후 홈네트워크기반의 전력선 통신시스템의 실질적인 참고데이터로서 유용하게 활용되리라 기대된다.

  • PDF

Effects of Power Line Carrier by Harmonics Source in Low-Voltage Power Distribution Network (저압 배전선의 고조파 성분이 통신신호에 미치는 영향)

  • Lee, J.J.;Lee, J.H.;Seo, J.W.;Jung, H.S.;Shin, M.C.;Park, C.W.
    • Proceedings of the KIEE Conference
    • /
    • 2000.11a
    • /
    • pp.205-207
    • /
    • 2000
  • 본 논문에서는 전력선을 통신 매체로 한전력선 통신시 전력선상에 항시 존재하는 전원 주파수의 고조파와 부하로 인한 고조파 부하 투입시 발생하는 임펄스형 잡음이 통신신호에 미치는 영향과 그 특징을 조사하였다. 통신 신호에 미치는 영향을 측정하기 위하여 모의 실험을 위한 별도의 전력선을 설치하였다. 또한 실제 전력선 통신을 재현하기 위하여 HTH사와 Intelogis사의 전력선 모뎀을 사용하였으며, 고조파 성분과 임펄스형 잡음의 실현을 위하여 인버터, 고조파 발생장치, 스위칭 부하를 설계하여 사용하였다.

  • PDF

Load Balanced QoS Routing for Precomputation of QoS Routes (QoS 경로의 선계산을 적용한 부하분산 QoS 라우팅)

  • 홍종준
    • Journal of Korea Multimedia Society
    • /
    • v.6 no.1
    • /
    • pp.121-127
    • /
    • 2003
  • In this paper, we propose a load balancing QoS routing on a targe scale network. We use the scheme in which it calculates the cost of resources with a precomputation and then selects a path among multiple paths based on the calculated cost for each resources. We also use the QoS routing scheme for the transit and the intra-traffic on a large scale domain-based network. For a domain in networks, this routing scheme precomputes K multiple paths between all pairs made up with each ingress and egress border routers along with the consideration of a load balancing, and then picks up paths having the high probability on the Path selection. This routing scheme can be applied for the transit traffic and the intra traffic and combines the Inter-domain and intra-domain routings seamlessly and put a high priority on the transit traffic Thus, these schemes make Possible both the global use of network resources and the load balancing.

  • PDF

Analysis of Speed Ripple Reduction Methods for Permanent Magnet Synchronous Motor with Eccentric-weight Load (AC 부하를 갖는 동기전동기의 고정도 속도제어기법 분석)

  • Park, Jung-Woo;Kim, Jong-Moo;Lee, Ki-Wook
    • Proceedings of the KIEE Conference
    • /
    • 2003.04a
    • /
    • pp.149-153
    • /
    • 2003
  • AC 부하를 갖는 동기전동기에 있어서, 동기전동기의 속도리플을 저감시키기 위한 문제를 풀기위해 3가지 제어기법에 대해 비교를 한 후 가장 강인한 제어기법에 대해 분석하였다. AC 부하를 갖는 특별한 제어 대상으로 엑스선 전산화 단층촬영 장치(CT)용 겐트리를 선정하였으며 시스템이 갖는 특별한 구조에 의해 이러한 시스템 특성을 갖는다. 동기전동기의 출력 축에 링(Fing) 모양의 원판 프레임을 갖으며, 이 원판 표면에 무게가 서로 다른 여러 장치(X_선 튜브, X-선 검출기, 고압발생장치, DAS 장치, 온도조절장치 등)를 부착하여 영상 획득 시스템의 회전부를 구축하기 때문이다. 이러한 시스템에서는 무게 평형을 갖지 못하는 편심 무게가 존재하게 되며 이로써 전동기 관점에서는 AC 부하처럼 인식되는 제어 조건으로 인식 될 수 있다. AC 부하를 갖는 동기전동기에 대해 일반적인 벡터제어 알고리즘으로 제어를 수행하면 정상상태에서도 속도 오차가 "0" 으로 줄어들지 않고 AC 형태의 오차 성분이 존재하며 편심 무게의 크기에 비례하여 진폭이 커지는 특성을 갖는다. 이러한 문제점을 해결하기 위하여 Sine파 보상전류를 갖는 속도제어기법, 펀심부하토크 관측기를 이용한 속도제어기법, 그리고 기준모델제어기법을 소개하였다. 각 방법에 대한 실험 결과로부터 편심무게의 변동과 편심 위치의 변동 조건에서 기준모델제어기법이 강인한 제어 특성과 리플저감 측면에서 가장 우수함을 검증하였다. 이로써 AC 부하 조건에서 고정도 속도 제어기가 요구되는 경우 좋은 선택의 지침이 될 수 있다고 본다.

  • PDF