• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.267-268
• /
• 2022

Jeju coastal waters are limited to high-risk areas due to the passage of international cruise ships, passenger ships, with a large number of people and fishing boats, or to the jeju port and the jeju civilian-military combined port and near by seas, so a VTS system will be established along jeju and seogwipo coast. There is no accurate standard for determining the number of people required by the maritime traffic control center. Therefore, this study calculated the required operating personnel for control seats on the coast of jeju and seogwipo by using VTS big data to efficiently calculate the workload of maritime traffic control. It is judged that this study can be used basic data for research that sets the standard for calculating the control workload.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.237-243
• /
• 2005

To design ship channel is one of important factors for planning and developing a port. Bends in channel should be avoided if possible, but the channel should be widened, if channel bend is unavoided, to account widened path of a ship in bend for the safe passage of a ship. In this study, Variable Bumper Area(VBA) model is applied to determine ship channel width in bend and channel-bend geometry. The result of this study shows that the width of a channel in bend may be designed as wide as the width in straight lane provided the angle of deflection is less than 30 degree, should be widened for 60degree deflection based on the length of the largest ship using the channel and the angle of deflection.

• Journal of Navigation and Port Research
• /
• v.29 no.8 s.104
• /
• pp.693-699
• /
• 2005

To design ship channels is one of important factors for planning and developing a port. Bends in channels should be avoided if possible, but the channel should be widened, if channel bend is unavoidable, considering the swept path of a ship for safe passage. In this study, Variable Bumper Area(VBA) model is applied to determine the channel widths in bends. The result of this study shows that the width of the bend may be designed as nearly same size of that in straight channel in case that the angle of deflection is less than 30 degrees, and that of the bend with 60 degrees deflection should be widened based on the length of the largest ship using the channel and the angle of deflection.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.11 no.2 s.23
• /
• pp.1-8
• /
• 2005

In the present maritime traffic conditions of Mokpo harbor, there exist many hazardous factors which may lead to huge accidents including marine oil pollution We analyze marine traffic environments including traffic congestion, natural conditions, maritime traffic accidents in the last 10 years, the fishery status, operation of traffic routes and management of navigational aids and regulations relating ships' routeing both in and out of the country. Consequently, this work is to propose improved marine traffic system in future.

• Journal of Navigation and Port Research
• /
• v.38 no.3
• /
• pp.253-259
• /
• 2014

Traffic risks in fairway and harbour area increase lately according to be a sharpe change of ship's size and speed. It becomes hot issue to design a fairway, which's width is important to lower traffic risk and ensure navigational safety. The current design making a fairway and width do not focus on maneuvering motion of a large ship, but traffic risks are clear on reflecting the design of fairway, specially on width. To contact with these problems, this research proposes how to determine fairway' width in consideration of traffic volume. it suggests several situations of marine traffic congestion as like narrow channel and harbour area. here uses 162 simulations in MTS Ver.1 developed. Acquired simulation's results, environmental stress dates, figure in a model that relates with required fairway' width and allowable traffic volume. In added, suggested model compares current design with an width.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.05a
• /
• pp.45-52
• /
• 2005

In the present maritime traffic conditions of mokpo harbor, there exists many hazardous factors which may lead to huge accidents including marine oil pollution We analyze marine traffic environments including traffic congestion, natural conditions, maritime traffic accidents of the last 10 years, the fishery status, operation of traffic routes and navigational aids of navigational aids and regulations relating ships' routeing both in and out of the country. Consequently, this work is to propose improved marine traffic system in future.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.05a
• /
• pp.246-247
• /
• 2018

Since the routes within VTS areas include harbour limit of major ports, there are sections where the traffic volume increases and the routes are normally narrow according to the geographical conditions. In the case of ports and VTS areas located on the west coast of Korea, it is affected by strong current due to large tidal differences. In this paper, we propose a method to produce useful information according to the change of navigation environment by analyzing the characteristics of ship's movement according to tidal stream or current. The SVR seaway model, support vector regression, and grid search were conducted in order to extract models.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.777-786
• /
• 2009

In recent, the ships of the Republic of Korea have been suffered from acts of piracy at the seas. With the increase of the threats from the acts of piracy and armed robbery against ships, some of the countries have dispatched their navy warships to the international waters and to carry out military operation against the pirates. However, the total eradication of the piracy has not been achieved due to the lack of international cooperation and the limitation of the international maritime convention itself. In addition, the absence of counter-measures to be taken by the ships itself including the employment of the professional maritime security forces should not be overlooked. In this connection, this paper examined the reality of the piracy together with armed robberies at the seas and the problems in the response were also analyzed. Based on the research, it suggested some possible measures with special reference to the private security. The limitation of this paper is that it only focus on the aspect of the private security. In this paper, the cooperation among the countries according to the maritime convention and internationally accepted norms and practices. To achieve the goals of this paper, through the comparative review of the related literatures, the practical measures applicable to the prevention of the piracy were suggested.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.980-991
• /
• 2023

To prevent accidents near the quay caused by a ship, ports are generally designed and constructed through navigation and berthing safety assessment. However, unpredictable accidents such as ship collisions with the quay or personal accidents caused by ropes still occur sometimes during the ship berthing or mooring process. Automatic mooring systems, which are equipped with an attachment mechanism composed of robotic manipulators and vacuum pads, are designed for rapid and safe mooring of ships. This paper deals with a displacement and velocity measurement system for the automatic mooring device, which is essential for the position and speed control of the vacuum pads. To design a suitable system for an automatic mooring device, we first analyze the sensor's performance and outdoor environmental characteristics. Based on the analysis results, we describe the configuration and design methods of a displacement and velocity measurement system for application in outdoor environments. Additionally, several algorithms for detecting the sensor's state and estimating a ship's velocity are developed. The proposed method is verified through some experiments for displacement and speed measurement targeted at a moving object with constant speed.

• Journal of Navigation and Port Research
• /
• v.48 no.3
• /
• pp.239-248
• /
• 2024

VTS operators monitor movements of vessels within their jurisdiction and provide necessary information to ensure safe navigation. This involves communication with vessels within the VTS area. Contents of these communications are manually recorded in logbooks. However, manual logging faces limitations due to its inability to document details comprehensively and the challenge of constant recording amidst various duties. This study aimed to quantitatively analyze the workload associated with manual logkeeping by examining eye movements of VTS operators. Eye-tracking devices were used to measure gaze patterns of VTS operator at the Busan Port. Results indicated that approximately 65% of the VTS operators' gaze was directed towards the operation consoles, which were focal points for marine traffic information. In contrast, only about 9% of their gaze was directed towards logbooks. These findings suggest that while VTS operators predominantly focus on areas related to information gathering and dissemination, logbooks, being information-recording zones, receive minimal attention. For effective traffic management, the primary focus should be on information processing and provision rather than manual documentation.