• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.453-456
• /
• 2007

감압 증류 후 생성되는 중질유의 고도화를 위하여 코킹 공정을 거친 후 정유 부산물로 생성되는 열적으로 매우 안정하고, 높은 발열량을 갖는 반면 황, 바나듐 함량이 높은 석유코크스의 효과적인 이용을 위하여 본 연구에서는 가스화 공정을 적용하였다. 1T/D 용량의 분류층 가스화기를 이용하여 유연탄(drayton coal), 석유코크스, 또는 혼합한 경우의 가스화 성능을 알아보았으며, 각각의 경우에 대하여 비교하여 보았다. 높은 열 안정성을 갖는 석유코크스의 효과적인 가스화를 위하여 반응기 내 체류시간 및 버너 노즐 변경에 따른 가스화 성능 개선을 시도하였으며, 이때의 온도, 산소/원료 공급량 조건에 따른 생성가스 성분 및 탄소전환율, 냉가스효율 변화 특성을 알아보았다. 버너 노즐 구경 변경으로 인한 슬러리의 미립화를 통하여 향상된 탄소전환율 및 냉가스효율을 얻을 수 있었다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.04a
• /
• pp.371-372
• /
• 2000

국내 해안에는 양식업에서 부산물로 다량 발생되는 굴, 홍합, 대합 등의 패각들이 해안에 야적되어 연안어장의 오염, 공유수면 관리상의 지장, 자연경관의 훼손 및 보건 위생상의 문제 등으로 환경오염을 초래하고 있다(정종현 등, 1998). 현재 폐 패각의 총발생량은 355,000톤 정도이며, 이 중 종묘채묘용으로 재사용되는 양을 제외하면, 토지개량제로서의 이용 등을 포함한 재활용율은 약 30%정도로 낮은 실정이다. (굴수협전국조합, 1999). 더구나 처리비용이 비싸기 때문에 발생되는 폐 패각은 대부분 방치되고 있는 실정이다. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.11a
• /
• pp.247-248
• /
• 2000

산업규모의 급속한 팽창과 더불어 에너지원의 확보에 석탄이 차지하는 비중이 커지고, 산업경제의 부산물인 쓰레기의 처리가 매립에서 소각방식으로 바뀌어가고 있는 시점에서 산업연료사용량과 난방부분의 에너지 사용량이 급속히 증가하고 있다. 이러한 인간의 생산활동으로 인해 대기 중으로 배출되는 가스는 크게 연소가스와 소각가스로 분리할 수 있는데 대표적인 연소가스로써는 SO$_2$가 있으며, 소각가스로는 HCl이 있다. (중략)

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2003.05a
• /
• pp.509-512
• /
• 2003

폐기물을 대상으로 하는 가스화공정은 환경문제와 에너지효율 문제에 동시에 접근할 수 있는 공정으로서 기존의 연소반응에 근거한 공정들을 점차 대체할 것으로 예측되고 있으며 많은 연구와 기술개발이 현재 진행되고 있다. 가스화용융 기술의 장점은 고유황, 고회분의 저급 석탄, 정유공장 부산물 및 도시폐기물까지도 강화되는 환경규제치를 만족하면서 깨끗한 에너지원으로 활용할 수 있다는 점이며, 발생된 고열량 생성가스의 정제를 통해서 연료로서 재활용이 가능하다는 것이다.(중략)

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2001.05a
• /
• pp.409-411
• /
• 2001

(주)서울암면은 현무암, 안산암, 백운석등의 천연원료를 사용하는 기존 공정 대신에 제철소에서 발생하는 고로슬래그를 주원료로 이용하는 공정으로 암면을 제조하고 있다. 본 연구에서는 재활용율이 낮은 산업부산물인 전기로 슬래그, 폐주물사, 알루미늄 드로스 둥을 암면원료로 대체사용하는 기술을 개발하고자 하였다. 시험생산은 전기로슬래그와 석탄을 분체로 혼합한 브리켓트를 만들어, 기존원료의 많은 부분을 대체하여 큐폴라로에 장입하여 생산하였으며 폐주물사, 알루미늄 드로스 등의 첨가율도 조절하였다. 생산된 암면 제품은 한국공업규격인 KS F4701 암면 단열재 시험법에 규정된 규격을 만족하였다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.1
• /
• pp.1-7
• /
• 2014

This paper aims to explain the safety assessment and remediation mechanism of Granulated Coal Ash (GCA) as a material for the remediation of coastal sediments and to evaluate the improvement of the sediment in Kaita Bay, where GCA was applied. The concentrations of heavy metal contained in GCA and the dissolved amounts of heavy metal from GCA satisfied the criteria for soil and water pollution in Japan. The mechanisms on the remediation of coastal sediments using GCA is summarized as follows; (1) removal of phosphate and hydrogen sulfide (2) neutralization of acidic sediment (3) oxidation of reductive sediment (4) increase of water permeability (5) increase of soil strength (6) material for a base of seagrass. From the results obtained from the field experiment carried out in Kaita Bay, it was clarified that GCA is a promizing material for remediation of coastal sediment. This remediation technology can contribute to promote waste reduction in society and to decrease cost of coastal sediment remediation by applying GCA in other polluted coastal areas.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.4
• /
• pp.180-188
• /
• 2013

The glass of E-glass fiber composition was fabricated by using refused coal ore which is obtained as by-product from Dogye coal mine in Samcheok. We used silica-alumina refused coal ore which has low carbon content relatively, and the amount of refused coal ore has been changed from 0 to 35 % in batch composition. E-glass was fabricated by the melting of mixed batch materials at $1550^{\circ}C$ for 2 hrs with different refused coal ore composition of 0~35 %. We obtained a transparent and clear glass with high visible light transmittance value of 81~84%, thermal expansion coefficient of $5.39{\sim}5.61{\times}10^{-6}/^{\circ}C$ and softening point of $851{\sim}860^{\circ}C$. The glass fiber samples were also obtained through fiberizing equipment at $1150^{\circ}C$, and tested chemical resistance and tensile strength to evaluate the mechanical property as a reinforced glass fiber of composite material. As the result, we identified the properties of E-glass fiber by using refused coal ore are plenty good enough compare to that of normal E-glass without refused coal ore, and confirmed the possibility of refused coal ore as for the raw material of E-glass fiber.

• Journal of the Mineralogical Society of Korea
• /
• v.28 no.2
• /
• pp.147-163
• /
• 2015

Chemical and mineralogical properties of coal ash samples from the nine thermal power plants of Korea were investigated to acquire basic data for estimating the potential of rare metal recovery. Chemical compositions of coal ash were consistent with those of average shale and foreign coal ashes. However, there were small differences between the metal contents of domestic anthracitic and imported bituminous coal ashes. Unburned coal particles were much abundant in the ash of domestic anthracitic coal. Chalcophile elements were relatively enriched in the fly ash compared to bottom ash. Silicate glass was the major component of coal ash with minor minerals such as quartz, illite (muscovite), mullite, magnetite, lime, and anhydrite. Al and Si were the major components of the glass with varying contents of Ca, Fe, K, and Mg. Glass occurred in a form of porous sphere and irregular pumace-like grain often fused with iron oxide spheres or other glass grains. Iron oxide spheres were fine intergrowth of fast-grown iron oxide crystals in the matrix of silicate glass. Chemical, microstructural, and mineralogical properties would guide successful rare metal recovery from coal ash.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.7
• /
• pp.5-12
• /
• 2013

The safety and structural integrity of buried pipes are usually at risk from constructing loading and compaction of backfill materials. The backfill material should be strong enough to help resistance and redistribute loads so that the buried pipe remains unaffected. Due to the many problems associated with buried pipes, there have been multiple studies on the development of a sustainable backfill material. In this study, a Controlled Low Strength Material made of coal ash was considered as a buried pipe backfill material. To determine the feasibility and performance of this backfill material, a numerical simulation was conducted with the results confirmed by a field test. Results showed maximum settlement to be 2 mm with the elastic strain of the buried pipe to be about 0.006.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.6
• /
• pp.266-273
• /
• 2011

Foamed glass was fabricated by using glass powder and foaming agents. For the glass powder, we used sodalime glass which's manufactured by using refused coal ore obtained as by-product from Dogye coal mine in Samcheok. And for the foaming agents, we used Calcium carbonate, Calcium phosphate and powder of shale type refused coal ore itself which has high content of carbon materials. We additionally used liquid binder for forming, and mixed together. And we formed rectangular shape and treated $800^{\circ}C$ for 20 min in an electrical furnace. The various kinds of foam glass samples were fabricated according to the kinds of foaming agents. The physical properties of samples, as specific gravity and compressive strength, were measured. Pore structure of each samples were investigated too. Foam glass with specific gravity of 0.4~0.7 and compressive strength of 30~72 kg/$cm^2$. Especially we get satisfying foam glass sample with low specific gravity of 0.47 and high compressive strength of 72 kg/$cm^2$ by the use of liquid calcium phosphate as foaming agent. It also had small and even shape of pore structure. Therefore, it is concluded that refused coal ore can be used for raw materials to manufacture secondary glass products such as a foamed glass panel for construction and industrial materials.