• Resources Recycling
• /
• v.28 no.4
• /
• pp.15-22
• /
• 2019

Coal combustion products are generated during coal combustion and can be grouped into fly ash and bottom ash depending on collection methods. Fly ash and bottom ash can be recycled for various purposes based on their characteristics. Australia is the fourth largest coal production country in the world and reuses coal ash as cement, concrete, mine filler, and agricultural soil amendment. When fly ash is used as a supplement for cement and concrete, strength of the cement and the durability of the concrete can be improved. Use of coal combustion product for mine backfill stabilizes underground mine voids and stores a large amount of coal ash in the voids. Because of alkalinity of coal combustion products, it can neutralize acid mine drainage when used for mine backfill. In addition, it can be used as an agricultural soil amendment to improve acidity and physical properties of the soil and to supply plant nutrients. Recycling of fly ash in Australia will be further expanded because of its low trace element contents that can be toxic to plants and low radioactive element contents existing within soil background concentrations. The characteristics of coal combustion products are related to the characteristics of the coal used for combustion, and since Korea imports coal from Australia, Korean coal combustion products also can be recycled for various purposes.

• Applied Chemistry for Engineering
• /
• v.25 no.1
• /
• pp.58-65
• /
• 2014

In this work, we constructed the sulfur-solidified materials using coal bottom ash from four thermal power stations in Korea and investigated their practical data for the production of industrial construction compounds. To manufacture the sulfur-solidified materials, we used a continuous mixer with the uniaxial screw-type. Also, coal bottom ash was used as a fine aggregate below 1.2 mm because of the operation characteristics for the continuous mixer. When the sulfur-solidified materials were produced with diverse sulfur concentrations (15, 20, 25, 30 wt%), compressive strength properties were analyzed. In addition, when the coal bottom ash was used with a high calcium oxide content, crack was found in the test product and pH of submerged liquid was above 12. These experimental results could be effectively applied to the recycling technology of coal bottom ash.

• Proceedings of the Turfgrass Society of Korea Conference
• /
• 2011.02a
• /
• pp.25-32
• /
• 2011

본 연구는 화력발전의 부산물로 발생하는 석탄바닥재가 골프장 사질 토양의 개량재로 사용 적합한지를 평가하기 위해 수행되었으며, 결과를 요약하면 다음과 같다. 1. 석탄바닥재의 화학성을 분석한 결과 총질소 0.34%, 가용성 인산 $52mgL^{-1}$, 치환성 칼륨 $51mgL^{-1}$ 뿐만 아니라 소량의 치환성 칼슘과 마그네슘을 함유하고 있어 식물생육에 이롭고, 유해중금속함량은 Cd, $Cr^{6+}$, Pb, Ni, As는 $1mgL^{-1}$ 이하, Cu 농도는 $1.25mgL^{-1}$ 검출되어 토양환경보전법의 토양오염우려기준 이하이므로 석탄바닥재 재활용으로 인한 토양오염 가능성은 매우 낮은 것으로 판단된다. 2. 모래 토양에 석탄바닥재를 부피비로 0~50% 비율로 혼합한 시료의 투수계수와 유효수분함량을 측정한 결과 석탄바닥재 혼합비율이 증가할수록 투수계수는 유의성 있게 감소하고 유효수분함량은 유의성 있게 증가해 석탄바닥재가 모래 토양의 낮은 수분보유력을 개선하는 효과가 있음을 확인하였다. 3. 모래 토양에 석탄바닥재를 부피비로 0~50% 비율로 혼합한 시료를 잔디식재층으로 조성한 라이시미터에 잔디종자 파종 후 약 4개월 뒤 잔디밀도가 완전히 형성된 후에 시비 후 3일 간격으로 채취한 용탈수를 분석한 결과 1일과 4일 후에 채취한 초기 용탈수에서는 석탄바닥재 혼합비율이 높을수록 $NO_3-N$, $NH_4-N$ 및 K함량이 유의성 있게 감소했으며, 대조구에 비해 석탄바닥재 혼합비율이 높은 처리구일수록 $NO_3-N$, $NH_4-N$ 및 K함량이 용탈수 채취기간 동안 지속적으로 용탈되었다. 이 결과로 석탄바닥재가 모래 토양의 낮은 양분 보유력을 개선하는데 효과적이고 석탄바닥재처리가 대조구에 비해 오랫동안 식물 생육에 필요한 양분을 공급하는 효과가 있음을 확인하였다. 4. 골프장 그린상구조와 동일한 시험포장을 만들고 모래 토양에 석탄바닥재 10%와 20% 그리고 피트, 액시스, 이소라이트를 부피비로 10% 비율로 혼합한 시료를 잔디식재층으로 조성하고 크리핑 벤트그래스(Agrostis paulstris Huds), Penn A-4 $10gm^{-2}$을 파종한 후에 처리구별로 잔디 품질을 평가하기 위해 잔디 밀도, 뿌리길이, 색상 및 시각적 품질을 조사한 결과 석탄바닥재 처리구는 기존에 사용하는 개량제인 피트, 액시스, 이소라이트 처리구와 동등한 잔디생육 촉진 효과가 있는 것으로 조사되었다. 5. 결론적으로 석탄바닥재는 골프장 토양의 물리적 특성과 화학적 특성을 개선하고 잔디생육에 필요한 양분을 공급하는데 효과적인 토양개량재라고 할 수 있다.

• Journal of Energy Engineering
• /
• v.27 no.2
• /
• pp.55-60
• /
• 2018

In this study investigated the Controlled Low Strength Materials using coal ash and steel slag(KR slag) as the main material in the thermal power plant classified as waste resource. Bottom ash and KR slag are mixed at a ratio of 7: 3 to expand the use of industrial by-products through carbonate($CO_2$-fixation) reactions and inhibit the exudation of heavy metals. The results showed that the water content increased as the content of bottom ash increased. It was confirmed that as the powder content increased, the bleeding ratio decreased. Also, as the content of one kind of ordinary portland cement (OPC) decreased, activation of hydration reaction decreased and compressive strength decreased. However, when the mixed composition is appropriately adjusted, the compressive strength of 2.0 MPa required for the controlled low-strength material can be satisfied.

• Resources Recycling
• /
• v.24 no.4
• /
• pp.67-75
• /
• 2015

The content distributions of some rare metals and rare earthe metals in coal ash (fly ash, bottom ash and pond ash) and leachate from coal-fired power plants were investigated. In case of Yttrium (Y) and Neodymium (Nd) which were strategic critical elements, their contents were ranged from about 23 ~ 75 mg/kg and it is shown they are worth to be developed for the recovery and separation method. Considering the annual amount of fly ash and bottom ash and pond ash, coal-fired power plants have great value of about 1,670 billion KRW and it is regards they are worthy as urban mines.

• Resources Recycling
• /
• v.23 no.6
• /
• pp.3-11
• /
• 2014

Bottom ash from coal fired power plants is not widely used due to a broad range of particle sizes and a high carbon content for producing geopolymers. The effect of mechanical activation on compressive strength of bottom ash- based geopolymers was examined by rod and planetary-ball milling to encourage full-fledged recycling of bottom ash, the main component of pond ash. The amount of amorphous component in the milled ash samples did not change significantly after the mechanical activation. It is presumably because needle-shaped mullite crystals, which is a major crystalline phase and grown in a glassy matrix, possess high strength and toughness, and therefore, they could endure external shocks and remain almost intact. Milling operation, however, decreased the particle size and improved the homogeneity of ash, thereby leading to increase reactivity of milled ash with alkali activators. Rod milling produced a relatively narrow particle size distribution of the milled ash particles; however, it was less effective in reducing the particle size. Nevertheless, it was interesting to observe that rod milling had equal effect on improving the compressive strength of geopolymers up to about 37%, as that of planetary ball milling. Rod milling is believed to be suitable process for enhancing the reactivity of bottom ash for large-scale recycling of bottom ash and producing geopolymers.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2012.04a
• /
• pp.460-463
• /
• 2012

인류의 문제점 중 하나는 환경 및 자원고갈의 문제에 직면해 있는 상황이다. 자원 고갈과 환경 문제를 조금이나마 해소하는 방법으로 폐자원을 이용하는 방법이 있으며 그 중 재활용 방안으로 화력발전소에서 사용 후 폐기물로 분류되는 석탄회를 이용하는 것이다. 국내 석탄회의 발생량은 2004년 현재 500만 톤으로, 2011년 약 700만 톤 이상일 것으로 추정되며, 이중 보일러 저부에서 채취되는 Bottom Ash가 약 20%로 100만 톤 이상 발생되는 것으로 보고되고 있다. 본 연구에서는 자원고갈과 환경오염문제를 해결하기위해 석탄회를 재활용하여 불연성능을 가진 기능성 바닥재 개발을 연구하고자 한다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.6
• /
• pp.277-282
• /
• 2007

The artificial lightweight aggregate (ALA) was manufactured using coal bottom ashes produced from a thermoelectric power plant with clay and, the sintering temperature and batch composition dependence upon physical properties of ALA were studied. The bottom ash (BA) had 13wt% coarse particle (>4.75mm) and showed very irregular shape so should be crushed to fine particles to be formed with clay by extrusion process. Also the bottom ash contained a many unburned carbon which generates the gas by oxidation and lighten a aggregate during a sintering process. Plastic index of green bodies decreased with increasing bottom ash content but the extrusion forming process was possible for the green body containing BA up to 40wt% whose plastic index and plastic limit were around 10 and 22 respectively. The ALA containing $30{\sim}40wt%$ BA sintered at $1100{\sim}1200^{\circ}C$ showed a volume specific density of $1.3{\sim}1.5$ and water absorption of $13{\sim}15%$ and could be appled for high-rise building and super-long bridge.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.5
• /
• pp.223-230
• /
• 2007

Plasticity of clay bodies containing bottom ashes(BA) and small portion of other wastes was investigated. Plasticity indices of clay bodies using Atterberg limits were measured. It was confirmed that the plasticity indices could be applicable in actual forming process by extrusion. The forming possible compositions were found by changing the contents of water, bottom ash, stone dust, and sewage sludge. The relationship between the plasticity and physical properties of the aggregate green body was also investigated. The compositions for extrusion forming can be expected by measured the plasticity indices and these results were confirmed by real extrusion process. There is also strong relationship between the plasticity indices and the property of aggregate green body.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.6
• /
• pp.305-311
• /
• 2012

In order to recycle the coal bottom ashes (denoted as BA) produced from a thermal power plant, the artificial aggregates (denoted as AAs) containing BA and red clay were manufactured, and the physical properties of AAs were studied as a function of particle size of BA and batch compositions. As-received BA had 38 wt% coarse particles of above 2 mm and many unburned carbon mass and porous slag particles were co-existed. So the two particle sizes of BA, the fine (< 100 ${\mu}m$) and coarse (< 2 mm), were prepared by milling and screening process. The AAs containing fine BA sintered at $1100{\sim}1200^{\circ}C$ had the higher bulk density and lower water absorption compared to the specimen made of coarse BA. The inside core of AAs manufactured by using coarse BA showed nonuniform and porous microstructure, while the AAs made of fine BA had a uniform and dense microstructure. In this research, the AAs containing BA and red clay with various bulk density (1.2~1.7) and water absorption (13~21 %) could be manufactured by controlling the particle size of BA and batch compositions, so the AAs of various physical properties could be applied to the wide fields such as construction/building materials in near future.