• Economic and Environmental Geology
• /
• v.56 no.3
• /
• pp.239-257
• /
• 2023

Sangdong deposit, a W-Mo skarn deposit, is located in Taebaeksan mineralized district, hosting vertically developed scheelite-quartz veins that formed at the late ore-forming stage. In this study, we tried to examine the geochemical signatures of ore-forming fluids and vein-forming mechanisms by analyzing the micro-texture of quartz veins and trace element concentrations of quartz. As a result of texture analyses, quartz veins in the hanging wall orebody and the foot wall orebody commonly exhibit the blocky and the elongate blocky texture, respectively, whereas quartz veins in the main orebody show both textures. These textural differences indicate that quartz veins from the hanging wall orebody were precipitated by the primary hydrofracturing due to H₂O saturation in the igneous body with relatively high temperature and pressure at a vein-skarn stage, and after that, repeated hydrofracturing caused the formation of quartz veins from the main orebody and foot wall orebody. The results of trace element concentrations show that Li⁺+Al³⁺↔Si⁴⁺ is a main substitution mechanism. However, those of the foot wall orebody were clearly divided into a Li⁺-dominated substitution and a Na⁺-, K⁺-dominated substitution. Considering that quartz veins from the foot wall orebody commonly show the elongate blocky texture, such a distinction means that it is a result of repeated injections of fluid with the different composition. Ti concentrations of quartz from the hanging wall, main, and the foot wall orebody are 28.6, 8.2, and 15.7 ppm in average, respectively. Given a proportional relationship between the precipitation temperature and Ti concentrations, it seems that quartz veins from the hanging wall orebody were precipitated at the highest temperature. Al concentrations of the hanging wall, main, and the foot wall orebody having an inverse relationship with fluid pH are 162.3, 114.2, and 182.5 ppm in average, respectively. These results show that Al concentrations in vein-forming fluids were not changed dramatically. Moreover, these concentrations are extremely low in comparison with the other hydrothermal deposits. This indicates that quartz in overall ore veins at Sangdong deposit was precipitated from the constant condition with slightly acidic to near neutral pH.

• Geotechnical Engineering
• /
• v.4 no.3
• /
• pp.27-34
• /
• 1988

Soils behave non-linearly at high strain. This study investigated the non-linear behavior of silty sands (Mixture of Ottawa Sand and Quartz Powder) by resonant column tests. The results were ·compared with Ramberg-Osgood's non-linear equation. From the tests, it was shown that the change of shear modulus and damping ratio was more sharp at low fine content, high void ratio and low confining pressure. It was also found that famberg-Osgood parameter, R was approximately 2.0, however the range of C varied from 200 to 3200.

• Tunnel and Underground Space
• /
• v.22 no.4
• /
• pp.284-295
• /
• 2012

Abrasiveness of rock plays an important role on the wear of rock cutting tools. In this study, Cerchar abrasiveness tests were carried out to assess the abrasiveness of 19 different Korean rocks. Cerchar abrasiveness test is widely used to assess the abrasiveness of rock because of its simplicity and inexpensive cost. This study examines the relationship between Cerchar Abrasiveness Index (CAI) and mechanical properties (uniaxial compressive strength, Brazilian tensile strength, Young's modulus, Poisson's ratio, porosity, shore hardness of rock), and the effect of quartz content, equivalent quartz content, which was obtained from XRD analysis. As a result of test, CAI was more influenced by petrographical properties than by the bonding strength of the matrix material of rock. CAI prediction model which consisted of UCS and EQC was proposed. CAI decreased linearly with the hardness of the steel pin. Numerical analysis was performed using Autodyn-3D for simulating the Cerchar abrasiveness test. In the simulations, most of pin wear occurred during the initial scratching distance, and CAI increased with the increase of normal loading.

• Economic and Environmental Geology
• /
• v.17 no.1
• /
• pp.17-34
• /
• 1984

The Ordovician limestone and dolomite was mineralized by the intrusion of quartz porphyry to form hydrothermal ore deposit along the fault shear zone, which trends $N30^{\circ}-40^{\circ}W$ dipping $60^{\circ}-70^{\circ}SW$. The primary manganese carbonates in the upper part of the deposit were oxidized to form supergene manganese ore deposits. The quartz porphyry is plotted mainly in granite region of the triangular diagram of normative composition. The granite phase contains more copper and lead, but less zinc, nickel and chromium than the granodiorite phase which occupies the northwestern part of the quartz porphyry. The content of copper, lead, zinc, nickel and chromium in the quartz porphyry is lower compared with the granitic rocks from the copper province in the Gyeongsang basin. But the granitic rocks from the lead-zinc province has lower content of copper and nickel than the quartz porphyry. The primary distribution pattern of trace elements in the country rock of limestone and dolomite has close relation with the hydrothermal mineralization, showing anomalous or high content near the fault shear zone. The secondary distribution pattern of trace elements in soils shows close relation with the solubility of the carbonates of the elements under weathering condition.

• Applied Biological Chemistry
• /
• v.14 no.3
• /
• pp.183-189
• /
• 1971

The studies reported herein were conducted to inquire the effect of fused siliceous materials which mixed with sand and quartz added calcium fertilzer on rice grown on low available silica content soil. The applied nitrogen level were examined for the two plots, nitrogen 10kg and 20kg per 10 a., and the siliceous materials(Wollastonite, Fused sand and Fused quartz) were applied as levels to 100kg, 300kg and 500kg per 10a. in the pots. The results are summerized as follows; 1. The available silica content solved in N/2 HCl solution of fused sand was more than of fused quartz but the silica solubility in 2% citric acid of fused quartz were higher than other. 2. The absorbed silica content by plant grown on the fused quartz plot was the highest among other siliceous materials and of fused sand and natural wollastonite were at almost equal. The ratio of absorbed silica of natural wollastonite was highest among them and in fused materials, the quartz was higher than sand. 3. The productivity of rice was increased by percentage of filled grain, weights of 1000 grains, and number of spikelets on account of the large quantity of the silica absorbed by plant Especially fused quartz showed the highest productive effect among siliceous materials and natural wollastonite and fused sand were similar effect. 4. From the above results. the fused quartz was selected as expelled siliceous fertilizer on rice plant among them and the fused sand was equal effect to natural wollastonite.

• Economic and Environmental Geology
• /
• v.44 no.2
• /
• pp.171-180
• /
• 2011

For 21 rock samples consisting of granite, sandstone and the effective thermal conductivity (TC) was measured with the LFA-447 Nanoflash, and mineralogical compositions were also determined from XRD analysis. The structural models were used to examine the effects of quartz content and the size of minerals on TC of rocks. The experimental results showed that TC of rocks was strongly related to quartz content with $R^2$ value of 0.75. Therefore, the proposed regression model can be a useful tool for an approximate estimation of TC only from quartz content. Some samples with similar values of quartz content, however, illustrated great differences in TC, presumably caused by differences in the size of minerals. An analysis from structural models showed that TC of rocks with fine-grained minerals was likely to fall in the region between Series and EMT model, and it moved up to ME and Parallel model as the size of minerals increased. This progressive change of structural models implies that change of TC depending on the size of minerals is possibly related to the scale of experiments; TC was measured from a disk sample with a thickness of 3 mm. Therefore, in case of measurements with a thin sample, TC can be overestimated as compared to the real value in the field scale. The experimental data illustrated that the scale effect was more pronounced for rocks with bigger size of minerals. Thus, it is worthwhile to remember that using a measured TC as a representative value for the real field can be misleading when applied to many geothermal problems.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.504-506
• /
• 2007

동해 울릉분지에서 채취된 피스톤 코어 시료의 퇴적상과 유기물 특성을 대비하였다. 코어 시료의 퇴적상은 크게 홀로세 생물교란된 뻘 퇴적상과 빙하기의 다양한(생물교란된, 엽리가 발달된) 뻘 퇴적상으로 구분되었다. 코어 시료의 유기물 특성은 총유기탄소함량과 퇴적물 밝기($L^{\ast}$), 석영 함량, 오팔A 함량을 대비하여 밝혔다. 총유기탄소함량은 퇴적물 밝기와 높은 상관계수를 가진다. 코어 시료의 석영 함량은 총유기탄소함량과 퇴적시기에 따른 상관관계의 차이를 보이는데, 이것은 퇴적기작 차이에 의한 것으로 해석된다. 그리고 오팔 A와 총유기탄소함량의 상관관계는 퇴적장소에 따라 차이를 갖는다. 동해 울릉분지 코어 시료는 총유기탄소함량과 퇴적물 밝기가 높은 상관계수를 갖는데, 이것은 초기속성작용의 영향이 크지 않았음을 지시하는 것이다. 후기 홀로세에서는 총유기탄소함량이 거의 일정한 구간에서도 오팔A 함량이 큰 차이가 나타나는데, 이것은 퇴적장소에 따라 고해양 생산력의 차이가 있었음을 지시하는 것이다.

• 베이커리
• /
• no.3 s.344
• /
• pp.104-107
• /
• 1997

• 베이커리
• /
• no.2 s.343
• /
• pp.104-107
• /
• 1997

• Economic and Environmental Geology
• /
• v.42 no.4
• /
• pp.335-342
• /
• 2009

The effects of bacterial lysis on the rate of quartz dissolution were investigated under pH 7 condition using Bacillus subtilis cells which were either irradiated or non-irradiated with gamma ray. The amount of dissolved organic carbon (DOC) which resulted from bacterial lysis increased in slurries of quartz and bacteria mixture over experimental period. Lysis of non-irradiated bacteria led to the elevated concentration of dissolved silicon when compared with abiotic control. Concomitant increase in the amounts of DOC and dissolved silicon over time indicated that lixiviation of silicon from quartz was due to bacterial lysis. Higher amounts of DOC and dissolved silicon were present in the irradiated bacterial slurries than those of non-irradiated bacteria. The enhancement of quartz dissolution in the irradiated bacterial slurries was likely attributed to disruption of organic molecules in the bacterial cells by gamma ray and formation of effective ligands for quartz dissolution. The results suggest that the effects of bacterial lysis on mineral weathering rate should be considered for prediction of time for released radionuclides to migrate to surface biosphere in high level radioactive waste disposal site.