• Journal of Korean Society of Archives and Records Management
• /
• v.7 no.1
• /
• pp.83-109
• /
• 2007

This paper focuses on the Bijombon Haerampeon written by Lee Eonjin The analysis of the paper is associated with the following: i) the career of Lee Eonjin ; ii) the manuscripts and collected works of Lee Eonjin ; iii) Haerampeon ; iv) Lee Yeonghyu and Nam Ok ; v) and the comparison of the Bijombon Haerampeon and Haerampeon carried in Songmokkwanjip and Songmokkwansinyeogo. Lee Eonjin(1740-1766) was a great poet and better known as one of the four great interpreters in Chosun dynasty. Woosangingbok was the only manuscripts handed down up to now among the works of Lee Eonjin. Woosangingbok ran the Bijombon Haerampeon, 6 pieces of itinery, 3 pieces of poem, 5 pieces of letter. Lee Eonjin visited Japan from the 6th of October, 1763 to the 20th of June in 1764 as a member of Tongsinsa in attendance upon Cho Om. He wrote Haerampeon vividly with five characters what he observed during his stay in Japan. It was composed on board of Ilkido from the 28th of May to the 8th of June in 1746. After Lee Yeonghyu and Nam Ok reviewed Haerampeon, Lee Yeonghyu placed a blue point and circle and Nam Ok placed a red point and circle. Ultimately the result raised the value of Haerampeon. Haerampeon is to be divide into four parts. Four parts are described below: the first part, the geographic features and products of Japan; the second part, the grow of Osaka city and the cityward tendency of world products; the third part, the racial prejudice, religion, and life; and the fourth part, the good neighborly relations with Japan. Finally, as compared with the proofing and difference of three kinds of text, namely, the Bijombon Haerampeon and Haerampeon carried in Songmokkwanjip and Songmokkwansinyeogo, it is approved that the Bijombon Haerampeon is the most correct text and has the value of cultural properties as a national treasure. The Result of this research will be contributed for research Lee Eonjin and utilized as information resources in the field of bibliographic science, Korean language and literature, and historical studies, etc.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.6
• /
• pp.545-550
• /
• 2012

Wind resource assessment is necessary when designing wind farm. To get the assessment, we must use a long term(20 years) observed wind data but it is so hard. so that we usually measured more than a year on the planned site. From the wind data, we can calculate wind energy related with the wind farm site. However, it calculate wind energy to collect the long term data from Met-mast(Meteorology Mast) station on the site since the Met-mast is unstable from strong wind such as Typhoon or storm surge which is Non-periodic. To solve the lack of the long term data of the site, we usually derive new data from the long term observed data of AWS(Automatic Weather Station) around the wind farm area using mathematical interpolation method. The interpolation method is called MCP(Measure-Correlative-Predict). In this study, based on the MCP Regression Model proposed by us, we estimated the wind energy at Handong site using AEP(Annual Energy Production) from Gujwa AWS data in Jeju. The calculated wind energy at Handong was shown a good agreement between the predicted and the measured results based on the linear regression MCP. Short term AEP was about 7,475MW/year. Long term AEP was about 7,205MW/year. it showed an 3.6% of annual prediction different. It represents difference of 271MW in annual energy production. In comparison with 20years, it shows difference of 5,420MW, and this is about 9 months of energy production. From the results, we found that the proposed linear regression MCP method was very reasonable to estimate the wind resource of wind farm.

• Korean Journal of Construction Engineering and Management
• /
• v.18 no.6
• /
• pp.78-88
• /
• 2017

With the growing use of BIM in the AEC industry, various new applications are being developed to meet these specific needs. Such developments have increased the importance of Industry Foundation Classes, which is the international standard for sharing BIM data and thus ensuring interoperability. However, mapping individual BIM objects to IFC entities is still a manual task, and is a main cause for errors or omissions during data transfers. This research focused on addressing this issue by applying novelty detection, which is a technique for detecting anomalies in data. By training the algorithm to learn the geometry of IFC entities, misclassifications (i.e., outliers) can be detected automatically. Two IFC classes (ifcWall, ifcDoor) were trained using objects from three BIM models. The results showed that the algorithm was able to correctly identify 141 of 160 outliers. Novelty detection is thus suggested as a competent solution to resolve the mapping issue, mainly due to its ability to create multiple inlier boundaries and ex ante training of element geometry.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.1
• /
• pp.140-147
• /
• 2012

Climate changes caused by fossil fuel energy usages have led to serious environmental damages and resource scarcity. Ever-increasing demand for energy causes harsh competition in international energy markets. Nuclear power, which once was regarded as a desirable clean energy, began to face public oppositions after the Japanese nuclear disaster in 2011. In this context, wind power is now considered to be an ever-more important recyclable energy source. Thus, this study intended to identify critical success factors for wind power construction projects. After a thorough literature review, two focus group interview sessions were conducted. A questionnaire-based survey, coupled with the two previous methods, resulted in the extraction of important factors for the success of wind power projects. Experts, including those working as constructors, designers, and owners, were paid a direct visit for the interview and survey. The critical success factors were categorized into feasibility study, right policies, equipment selection, and project financing issues. The proposed critical success factors are expected to be an effective guideline for future investors in wind powers.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.3
• /
• pp.52-67
• /
• 2021

This study is an attempt to explore the roles of and the collaborative relationship between Daheojang and Maedeupjang. Daheojang and Maedeupjang share a similar manufacturing process. However, in modern times, Daheojang totally disappeared, and Maedeupjang was designated as an intangible cultural property. The present study will investigate the role of Daheojang and Maedeupjang based on the literature of the Joseon dynasty. Daheojang were craftsmen who made bands and strings of woven or twisted silk strands. They made mangsu and tassels or made knots to produce magnificent artifacts. Maedeupjang complete all steps of the process, from refining, dyeing, combining threads, daheo, maedeup, to the tassel. Daheojang in the Joseon dynasty was the center of this process. Daheojang belonged to almost all Uigwe because it used items ranging from large uso to cushion straps. Dahoe is a craft with various items and techniques. It has been widely used to produce majestic items like formal dresses, ritual ceremony pieces, and mountings, as well as daily items like jodae, pocket straps, and norigae. Based on the records of Uigwe in the late Joseon dynasty, the study explored the collaborative relationship between Daheojang and Maedeupjang. Sambang, the room where both Daheojang and Maedeupjang belong, was the room to produce the royal chair. The royal chair essentially includes large uso. The large uso is an artifact that ties a knot in a thick circle more than two meters long. While Daheojang made rounded daheo, Maedeupjang made delicate and balanced knots. Also, they produced royal inscriptions together with a royal seal with decorative mangsu and a seal of thick rounded daheo. In order to learn about traditional technology, it is necessary to study the system of the times and social trends. Therefore, the study focused on Daheojang, who were common master craftsmen during the Joseon dynasty but now are not familiar to most people.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.3
• /
• pp.29-39
• /
• 2021

This study interpreted a traditional garden of Korea through reception aesthetics. The 'gap' of acceptable aesthetics is found in the 'distance that occurs between writers and readers'. This study aims to interpret this gap between what the writer intends and what the reader expects. Boundaries do not limit traditional spaces in Korea and, therefore, are not limited by characteristics. These characteristics were studied from the perspectives of the author, the work, and the reader. The aspect first looked at the life and ideas of the gardener, the second analyzed the form and structure of the garden, and the last examined writings, from the past and present, of those who appreciated the garden. From the author's perspective, Sosoewon was understood as a garden that embodied the philosophy of Yang Sanbo. Second, the duality and indeterminateness were recognized as two characteristics of this work; artifacts in the garden were arranged in a natural form, and the gardens have indefinite boundaries, so they can be freely expanded and reduced. Finally, from the reader's perspective, it was noted that the beauty of this garden is enhanced through poetry, painting, and writing. Thus, historic gardens of Korea can be open spaces where the meaning of the garden is enriched through the free participation of viewers based on their own ideas.

• Economic Analysis
• /
• v.25 no.4
• /
• pp.1-24
• /
• 2019

This study examines the labor market performance of graduates who had student loans. Compared to earlier studies, we extended analyses to all jobs that were experienced for more than 18 months after graduation. First, we found that students who had student loans earned 2.81% less at their first job compared to their counterparts without student loans. Second, the wage gap decreased over time, a reduction of 0.66%p due to labor market turnovers. Third, when we compared cumulated labor income, however, the amount for borrowers were continuously higher. This is because the job searching period of a borrower was shorter, despite relatively lower wages at the first job, and borrowers also made more frequent job turnovers, accompanying relatively more wage increases. These results suggest that the negative effects of college loans on earnings, reported in previous studies, may have exaggerated the negative impact to some extent of having loans. However, when we look at the quality of jobs beyond simply wages, the proportion of borrowers working at large companies as regular workers was consistently low. Given that job conditions at the earlier stages of one's career may lead to gaps over time, our findings call for more systematic investigations into the effects that student loans have on long-term labor performance.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.3
• /
• pp.181-188
• /
• 2013

The increase of carbon dioxide ($CO_2$) emission is known as one of the major causes of global warming, and it has a strong influence on the global environment. Therefore many researchers and politicians have tried to regulate the $CO_2$ emission. In regards to the matter, the IMPACT (Inclusive Marine Pressure Assesment and Classification Technology) committee under the Japan Society of Naval Architects and Ocean Engineers (JASNAOE) has developed an inclusive environmental impact assessment index, so-called "Triple I(III)", in order to assess the environmental impact including economic factors due to the artificial development of marine. In this study, III was applied to compare between the environmental impact of $CO_2$ emitted by container vessels during their life-cycle period and economic benefit due to their operating. Furthermore, III was also applied to assess the comprehensive environmental impact for the cases with various capacities of container vessels and different sailing route. From the results, the case for shortening of the sailing route is more effective to get the advantageous assessment results of III than the case for varying the size of vessels.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.1
• /
• pp.131-144
• /
• 2018

The urban center of a large city has a high concentration ratio of population, commerce, and traffic. Therefore, the expected effect is high from the introduction of the urban utility tunnel and it also has sufficient economic feasibility considering life cycle cost. Moreover, the construction cost can be greatly reduced if it is included in a large underground development such as a subway or a complex transfer center construction. However, it is not reflected in actual underground development plan. When planning a urban utility tunnel in Korea, it is expected to have difficulties such as the cost of relocation of the existing Life-Line, conflicts among the individual facility institutions, procurement of construction resources and sharing. Furthermore, it is possible to promote the project only if a consensus is drawn up by a collective council composed of all facilities and project developers. Therefore, an optimal alternative should be proposed using economic analysis and feasibility assessment system. In this study, the analytic hierarchy process (AHP) is performed considering the characteristics of urban areas and the importance of each indicator is quantified. As a result, we can support reasonable design capacity optimization using the feasibility assessment system.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.6
• /
• pp.101-109
• /
• 2011

As climate change is becoming the main issue, various efforts are focused on saving building energy consumption both at home and abroad. In particular, it is very important to save energy by maintenance, repair and rehabilitation of existing multi-family housing complex, because energy consumption in residential buildings is not only forming a great part of gross energy consumption in Korea but the number of deteriorated complexes is also sharply increasing. However, energy saving is not considered as a main factor in decision making on rehabilitation project. Also, any supporting tool is not appropriately prepared in existing process. As the first step for development of decision support system on rehabilitation, this paper developed a breakdown structure, which makes clusters of multi-family housing complexes. Decision tree, one of data mining methods, was used to make clusters based on the characteristics and energy consumption data of multi-family housing complexes. Energy saving and CO2 reduction will be maximized by considering energy consumption during rehabilitation process of multi-family housing complex, based on these results and following research.