• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.89-90
• /
• 2006

We synthesized emissive materiaJs, nameJy $Zn(HPB)_2$. The fundamentaJ structures of the OLEDs were ITO / NPB (40 nm) $Zn(HPB)_2$ (40 nm) / $Alq_3$:DCJTB (20, 30, or 40 nm) / LiF / AI. We varied the thickness of $Alq_3$:DCJTB from 20 nm to 40nm. We measured current density-voJtage and luminance-voJtage characteristics at room temperature. When the thickness of the Alq3:DCJTB layer was 40 nm, white emission is achieved. The CIE coordinates are (0.32, 0.33) at an applied voltage of 14V.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.508-508
• /
• 2013

백색 유기발광소자는 전색 디스플레이, 액정디스플레이의 backlights, 조명에서 잠재적인 가능성 때문에 디스플레이와 조명 업계에서 각광 받고 있다. 백색 유기발광소자를 제작하기 위한 방법으로 형광체를 이용한 백색 유기발광소자가 연구되고 있지만, 아직 색순도와 색좌표에 대한 연구가 필요하다. 본 연구에서는 무기물 형광체를 이용한 백색 유기발광소자의 전기적 특성과 광학적 특성을 관찰하였다. 광원으로 사용된 청색 유기발광소자에 적색과 녹색의 무기물 형광체를 결합하는 방법으로 백색 유기발광소자를 제작하였다. 광원으로 사용한 청색 유기발광소자의 양극으로는 투명전극으로 널리 쓰이고 있는 ITO를 사용하였고 정공 수송층으로는 N,N'-bis-(1-naphthyl)-N,N'-diphenyl-1,1'-biphenyl-4,4'-diamine, 청색 발광층으로는 1,3-bis(carbazol-9-yl) benzene 호스트에 bis (3,5-difluoro-2-(2-pyridyl)phenyl)-(2-carboxypyridyl) iridium (III) 청색인광도 펀트를 사용하였다. 정공 저지층과 전자 수송층으로는 각각 2,9-dimethyl-4,7-diphenyl-1,10-phenanthorlene와 4,7-diphenyl-1,10-phenanthroline을 사용하고 전자 주입층으로는 lithium quinolate를 사용하였으며 음극으로는 Al을 사용하였다. 색 변환층으로 사용된 유기물 형광체는 sol-gel 방법으로 제작된 적색 형광체와 녹색 형광체를 사용하였다. Sol-gel 방법으로 제작된 형광체에 대한 주사현미경 측정 결과 입자의 표면이 고르고 크기가 작고 균일하였고, 높은 온도 열처리에 따라서 용매제가 대부분 제거되어 형광체 발광 특성이 잘 일어났음을 확인하였다. 제작한 백색유기발광소자에서 혼합비율에 따른 전계발광 특성 변화를 관찰하였다.

• Applied Chemistry for Engineering
• /
• v.31 no.2
• /
• pp.226-229
• /
• 2020

N-phenylmaleimide (PMI), a compound for strengthening the heat resistance of ABS resin, is a yellow crystal. Therefore, copolymers modified with PMI exhibit color, which limits their use. In order to overcome such disadvantage, the demand for N-cyclohexylmaleimide (CHMI), which has similar properties to PMI and also is a white crystal, is increasing. However, CHMI is difficult to industrialize due to the formation of various by-products during synthesis, which requires an additional purification process resulting in a low yield. In this study, composite catalysts were developed to improve these problems and industrially produce CHMI. Finally, CHMI was synthesized with a 85% yield and at least 99.5% purity.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.14 no.2
• /
• pp.69-80
• /
• 1986

In order to analyse the color preference quantitatively, specially with reference to the subjects in the age of twenties, 100 subjects(M=50, F=50) that unconsidered other factors were adopted and responded to 4 items of the questionaire. The item no. 1 was to investigate the most prefered color on the white background, no. 2 was to most preferred stimulation -level of lightness in the same hues, no. 3 was to most prefered color on 5 different backgrounds -grey, blue, pink, yellow, and yellow green-, and no. 4 was same as no. 3 but with different color-arrangement Materials for item 1 and 3 were made with transparent acryl-boards(30cm$\times$30cm), on which 16 color chips arranged on circle, for item 4 on lattice, and for item 2 with 16 white boards(8cm$\times$21cm), on which 7 color chips of different lightness-level arranged. Reflectance(Y) and color coordinate(x, y) of all color chips measured with color difference meter were transfered into wavelength(nm), exitation purity(%), and Munsell's value. The results may be summarized as follows: 1) Most prefered color was bluish green with wave1ength about 500nm. As increasing of exitation purity of color, more prefered. 2) When there were 7 different levels of lightness in the same hues, the relationship between the number of preference and the stimulation was inverted U-shaped. 3) With changing the background -color, the prefered colors were contrasting when backgrounds were low or high intensity-stimulation and familiar colors when backgrounds were medium intensity.

• Korean Chemical Engineering Research
• /
• v.43 no.3
• /
• pp.360-365
• /
• 2005

SMB (simulated moving bed) is a continuous chromatographic process by shifting periodically port position. Binary of mixture, Blue dextran and Orange G, was separated by SMB. These components have unique color individually, that is, Blue dextran is blue and Orange G is orange. It is easy to understand SMB process by observing the shift of color changes in SMB. These components was not adsorbed to stationary phase and isolated by difference of size exclusion factor. Mass transfer coefficient was determined by single pulse test under several flow rate conditions. Operation condition was obtained by standing wave theory and optimized for high purities in extract and raffinate streams. Experiment was performed in open loop 4 zone (2-2-2-2) SMB. There are several advantages in open loop SMB, where extract is product for high purity. It is also easy to control flow rate and monitor experimental state during operation. Experimental, extract and raffinate history is well fitted with simulation results, however, column concentration profile is a little different from simulation results. Purities were 99.5％ for extract and 98.9％ for raffinate and extract and raffinate yields were obtained as 98.9％ and 99.4％ respectively.

• Clean Technology
• /
• v.13 no.4
• /
• pp.257-265
• /
• 2007

As a basic study for the development of pilot-scale distillation process of waste photoresist strippers from semiconductor industry, lab-scale experiments for the recovery of NMP (N-methy1-pyrrolidione) and BDG (Butyldiglycol) from waste photoresist strippers have been made using a spinning band vacuum distillation column. Purities of NMP and BDG obtained from the present experiments were higher than 99.5%. Furthermore, water content was less than 1000 ppm, color grade(APHA) less than 50, most metal contents except sodium less than 1 ppb. Those results indicate that NMP and BDG reclamed by distillation satisfy the their specifications required for the formulation of new photoresist strippers. Recovery rate of NMP and BDG was 96 and 53%, respectively, for type A, and 93 and 57%, respectively, for type B waste PR stripper solution.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.8
• /
• pp.138-148
• /
• 1999

Thermal deformations of tension mask under localized heating are analyzed using finite element method and electron beam landing shifts are predicted by the analysis results. In CRT, electron beam landing shifts due to thermal deformations of the tension mask make the color purity of screen worse. In order to get the final results of thermal deformations, firstly the tension processes of the mask and following welding processes between the tensional mask and rail must be analyzed sequentially. And then, nonlinear transient thermo-elastic finite element analysis is performed on every part inside CRT including tension mask, wherein thermal radiation is a main heat transfer mechanism. Because the tension mask has numerous slits, the effective thermal conductivity and effective and effective elastic modulus is calculated, and the tension mask is modeled as a shell without slits. From the displacement results of tension mask, electron beam landing shifts is calculated directly. Experiments are performed to confirm our analysis results. Temperature distributions and beam landing shifts of tension mask are measured and the results are in good agreement with those of analyses.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.2018-2019
• /
• 2007

Organic light emitting diodes (OLEDs) show a lot of advantages for display purposes. Because OLEDs provide white light emission with a high efficiency and stability, it is desirable to apply OLEDs as an illumination light source and back light in LCD displays. We synthesized new emissive materials, namely $Zn(HPB)_2$ and Zn(HPB)q, which have a low molecular compound and thermal stability. We studied white OLEDs using $Zn(HPB)_2$ and Zn(HPB)q. The fundamental structures of the white OLEDs were ITO / NPB (40 nm) / $Zn(HPB)_2$ (40 nm) / Zn(HPB)q (20 nm) / LiAl (120nm). As a result, we obtained a maximum luminance of $15325cd/m^2$ at a current density of $997\;mA/cm^2$. The CIE (Commission International de l'Eclairage) coordinates are (0.28, 0.35) at an applied voltage of 9.75 V.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1373-1374
• /
• 2007

We has been synthesized $(POB)_{2}Ir(pic)$ as a red emitting materials and evaluated in the organic light emitting diodes (OLED). The layer of $Alq_3$ doped with $(POB)_{2}Ir(pic)$ as emitters has been demonstrated. The structure of the device is ITO/ NPB (40 nm) / $Zn(HPB)_2$ (40 nm)/ $Alq_3$ : $(POB)_{2}Ir(pic)$ (30 nm) / LiF / Al. We varied the doped rate of $(POB)_{2}Ir(pic)$. The doped rate is 0.4 %, 0.6%, 0.8 and 1.2%, respectively. When the doped rate of the $Alq_3$:$ Ir(POB)_{2}(pic)$ was 0.6%, white emission is achieved. The Commission Internationale de l'Eclairage (CIE) coordinates of the white emission are (0.316, 0.331) at an applied voltage of 10.75V.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.12
• /
• pp.837-840
• /
• 2014

Novel materials of $Zn(HPB)_2$ and Ir-complexes were respectively synthesized as blue or red emitting material. White Organic Light Emitting Diodes (OLED) were fabricated by using $Zn(HPB)_2$ for a blue emitting layer, Ir-complexes for a red emitting layer and $Alq_3$ for a green emitting layer. White OLED was fabricated by using double emitting layers of $Zn(HPB)_2$ and $Alq_3:Ir$-complexes, and hole blocking layer of BCP. We also varied the thickness of BCP. When the thickness of BCP layer was 5 nm, white emission was achieved. We obtained a maximum luminance of $3,500cd/m^2$. The CIE coordinates was (0.375, 0.331). From this study, we could propose that the hybrid structure is efficient in lighting application of white OLED by improvement of color purity.