• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.1
• /
• pp.83-95
• /
• 1999

Wavelet transform has localization for time or frequency. It is useful to analyze a nonstationary signal. Basic function on wavelet transform is generated dilating and translating the original wavelet(mother wavelet). In this paper, time-frequency analysis method using linear combination wavelet transform is proposed. And it is applied to diagnostic monitoring system using the proposed linear combination wavelet transform. The stationary and nonstationary signal is used linear chirp signal, fan noise signal, a sinusoid signal from revolution body, electronic signal. Transform applied to signal analysis use fast Fourier transform (FFT), Daubechies, Haar and proposed linear combination method. The result of time-frequency analysis using linear combination wavelet transform is suited for portraying nonstationary time signal as well as stationary signal. Also the diagnostic monitoring system carry out the effective the signal analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.4
• /
• pp.712-720
• /
• 1994

In digital mobile communication systems, the convolutional coding is considered as the optimum error correcting scheme. Recently, the Viterbi algorithm is widely used for the decoding of convolutional code. Most Viterbi decoder has been proposed in conde rate R=1/2 or 2/3 with memory components (m) less than 3. which degrades the error correcting capability because of small code constraints (K). We consider the design method for typical code rate R=1/2, K=7(171,133) convolutional code with memory components, m=6. In this paper, a novel construction method is presented which combines maximum likelihood decoding with a state transition double detection and comparison method. And the designed circuit has the error-correcting capability of random 2 bit error. As the results of logic simulation, it is shown that the proposed Viterbi decoder exactly corrects 1 bit and 2 bit error signal.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8B
• /
• pp.699-706
• /
• 2003

This paper is to verify that 2-state MMPP Model conform to ATM VBR traffic characteristics by measuring and analyzing real-time VBR traffic in KT's ATM network. As a result, we validated the fact that real-time VBR traffic of ATM network cannot be apply to MMPP model and must be represented by previously general On-Off Model with characteristics as follows: arrival rate of On state (λ$_1$) is deterministic, arrival rate of Off state (λ$_2$) is zero, and two transition rate (T$_1$,T$_2$) is only random variable. As research results are to handle real traffic, these results can be used to all ATM network traffic model with traffic management function such as KT's ATM network.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.5
• /
• pp.400-409
• /
• 2001

A new phase-shifted parallel-input/series-output(PISO) dual converter for tush-power step-up applications has been proposed. Since the proposed converter shows a low switch turn-off voltage stress, switching devices with low conduction loss can be employed in order to improve the power conversion efficiency. Moreover, it features a low output capacitor root-mean-square(RMS) current stress, low input current and output voltage ripple contents, and fast control-to-output dynamics compared to its PWM counterpart. In this paper, the operation of the proposed converter is analyzed in detail and its mathematical models and steady-state solutions are presented. A comparative analysis with the conventional PWM PISO dual converter is also provided. To confirm the operation, features, and validity of the Proposed converter, experimental results from an 800W, 24-350Vdc prototype are presented.

• Journal of Korea Multimedia Society
• /
• v.6 no.2
• /
• pp.216-223
• /
• 2003

In this paper, we present SCCRS(Speech and Character Combined Recognition System) for speaker /writer independent. on-line multimodal interfaces. In general, it has been known that the CHMM(Continuous Hidden Markov Mode] ) is very useful method for speech recognition and on-line character recognition, respectively. In the proposed method, the same CHMM is applied to both speech and character recognition, so as to construct a combined system. For such a purpose, 115 CHMM having 3 states and 9 transitions are constructed using MLE(Maximum Likelihood Estimation) algorithm. Different features are extracted for speech and character recognition: MFCC(Mel Frequency Cepstrum Coefficient) Is used for speech in the preprocessing, while position parameter is utilized for cursive character At recognition step, the proposed SCCRS employs OPDP (One Pass Dynamic Programming), so as to be a practical combined recognition system. Experimental results show that the recognition rates for voice phoneme, voice word, cursive character grapheme, and cursive character word are 51.65%, 88.6%, 85.3%, and 85.6%, respectively, when not using any language models. It demonstrates the efficiency of the proposed system.

• Journal of Advanced Navigation Technology
• /
• v.8 no.2
• /
• pp.190-196
• /
• 2004

The development of a new hardware structure which can implement the viterbi algorithm efficiently is required for applications such as a software radio because the viterbi algorithm, which is an error correction code function for the second and the third generation of mobile communication, needs a lot of arithmetic operations. The length of K in the viterbi algorithm different from each standard, for examples, K=7 in case of IS-95 standard and GSM standard, and K=9 in case of WCDMA and CDMA2000. In this paper, we propose a new hardware structure of an adaptive viterbi decoder which can decode the constraint length in K=3~9 and the data rate in 1/2 ~ 1/3. Prototyping results targeted to Altera Cyclon EPIC20F400C8, shows that the proposed hardware structure needs maximum 19,276 logic elements and power dissipation of 222.6 mW.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.14-14
• /
• 2017

안정하도란 하도형성유량이 발생하는 조건에 대해 단면내에서 발생하는 유사량과 유입되는 유사량이 평형상태를 유지하는 단면을 의미하며, 안정하도 평가 및 설계란 현재 단면을 안정하도 단면과 비교하여 평가하거나 안정하도를 만족하는 하상경사와 하폭, 수심을 도출하는 과정을 의미한다. 이러한 안정하도 평가 및 설계는 하천을 정비하거나 복원하는 과정에서 장기적인 하상 평형상태를 고려하기 위해 적용할 수 있으며, 하상 침식 혹은 퇴적에 대해 지점별 평가방법으로 활용 할 수 있다. 안정하도 단면은 상류에서 유입되는 유사량과 대상구간의 발생 유사량의 평형조건에 의해 결정되기 때문에 유입되는 유사량 자료의 정확성과 대상구간 발생 유사량 산정의 정확도가 전체 평가 결과의 신뢰도에 가장 중요한 요소로 작용한다. 그러나 현재까지 활용되어 온 안정하도 단면 계산 방법의 경우 대상구간 발생 유사량 결정을 위한 유사이송공식의 선택이 특정 공식으로 한정되어있어 국내 하상과 적합한 유사이송공식의 적용이 매우 제한적이었다. 따라서 본 연구에서는 이러한 기존의 안정하도 평가 및 설계 방법을 개선하기 위해 다양한 유사이송공식의 적용이 가능한 안정하도 평가 모델의 알고리즘을 제시하였으며, 관련 분야의 실무자가 쉽게 활용 할 수 있도록 사용자 친화적인 사용자 친화적인 안정하도 평가 및 설계 프로그램(Stable Channel Analysis and Design, SCAD)을 개발하였다. 본 연구에서는 기존의 안정하도 단면 계산 방법인 Copeland 방법을 분석하여 새로운 알고리즘을 개발하였으며, 단면 유사량 분석 계산과정에서 자갈하상 공식을 포함한 총 다섯 가지의 유사이송공식을 새롭게 추가하였다. 개발된 SCAD 프로그램은 정확도 및 적용성 향상을 위해 청미천과 내성천 모래하상 구간 그리고 원주천 자갈하상 구간에 대해 시험계산을 수행하였고 평가 결과를 프로그램 개선을 위해 적극 활용하였다. 또한 웹 포팅 프로그램 구축을 통해 다양한 사용자가 특정 웹사이트에서 프로그램에 쉽게 접근할 수 있도록 하였다. 본 연구에서는 개선된 안정하도 평가 및 설계 프로그램을 활용하여 다양한 유사이송공식 선택에 따른 안정하도 산정 결과 값의 변화를 분석하고 그 범위를 정량적으로 제시하였다.

• Tunnel and Underground Space
• /
• v.20 no.3
• /
• pp.194-206
• /
• 2010

It has been presumed that Bangudae-petrogram and Chunjonri-petrogram have been sculptured along the river Taewha in the prehistoric age. These petrograms have been sculptured on shale, the sedimentary rock of cretaceous in Mesozoic era and have been weathered by wind and rain for around 6000 years, resulting in weathering grade 5. Specially, Bangudae-petrogram has been in submerged zone in Sayeon dam for 168 days a year and the submersion has been repeated for 45 years up to date. This paper adopts an engineering approach to these petrograms' properties and discuss how to enhance strengths of petrograms themselves and stop weathering.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.118-118
• /
• 1999

CVD방법에 의한 TiN 박막 형성에 있어서 ICP-CVD 방법이 대두되고 있다. 이것은 precursor에 대한 radical 형성, 식각된 패턴에서 양 벽의 self-shadowing 효과, 낮은 tress등으로 dense 한 박막을 얻을 수 있기 때문이다. TiN 박막은 Si 기판의 온도를 상온에서 50$0^{\circ}C$까지 유지하면서 TEMAT의 유량을 5-20sccm으로 변화시키면서 증착하였다. 증착 후 TiN 박막의 결정화에 따른 열처리는 Ar과 N2-가스분위기에서 in-situ로 증착하였다. 증착 후 TiN 박막증착 조건수립에 따른 플라즈마 특성진단은 전자의 온도와 밀도, 평균 전자밀도, 이온 에너지 분포, radical 분포, negative 이온분포 등으로 측정하였다. 플라즈마 변수에 따른 TiN 박막의 결정성과 상 변화는 XRD로 분석하였고, 조성비 및 TiN 박막의 원소화학적 상태, 결합에너지, 각 상에 따른 결합 에너지 천이정도, 초기 형성과정 및 반응기구 등은 RBS와 XPS로 조사하였다. TiN 박막의 표면상태, morphology 거칠기, TiN/Si(100)구조에서 계면상태 등은 SEM, AFM, 그리고 HRTEM으로 분석하였다. TiN 구조 박막의 비저항, carrier concentration 그리고 mobility 측정은 박막의 표면이 균일하고 bls-홀이 없는 것으로 하여 4-point probe 방법으로 측정하였다. 이들 분석으로부터 ICP-CVD 방법에 의하여 형성된 TiN 박막이 초고집적 반도체 소자의 contact barrier layer로서의 적용 가능성을 평가하였다.

• Journal of the Korean Chemical Society
• /
• v.11 no.4
• /
• pp.143-149
• /
• 1967

The Transient State Theory of Significant Liquid Structure is applied to a binary liquid solution of benzene and carbon tetrachloride, which gives slightly positive deviation from Raoults law. The partition function for the solution is derived according to the proposed theory. The various thermodynamic properties such as total and partial vapor pressures, molar volumes, entropies of mixing, and compressibilities are calculated at three different temperatures, 298.15^{\circ}K$, 313.15^{\circ}K$ and 343.1515^{\circ}K$. The calculated values agree satisfactorily with experimental data.