• Korean Journal of Food Science and Technology
• /
• v.20 no.3
• /
• pp.331-337
• /
• 1988

The thermal properties of typical five Indica and five Japonica rice varieties were investigated by Differential Scanning Calorimetry (DSC). There was no significant difference in gelatinization temperature between Indica and Japonica varieties, but the average enthalpy of gelatinization was larger in Indica types than that in Japonica. However, the enthalpy of melting of amylose-lipid complex was larger in Japonica types than that in Indica types. The DSC thermogram of hydrolyzed rice residue included a smaller peak of gelatinization with narrow range of temperature. Retrogradation of gelatinized rice kernel was also determined with DSC theremograms. The endothermic peak areas clearly increased with increasing storage time at $4^{\circ}C$ so that the area could be used as a measure of the relative degree of retrogradation. The results indicated that Samgang variety(Indica) retrograded more rapidly than Chuncheong variety(Japonica).

• Membrane Journal
• /
• v.23 no.2
• /
• pp.176-184
• /
• 2013

To investigate the performance of VOC separation, composite hollow fiber membrane was prepared which composed of poly (ether imide) support prepared by phase separation method and poly (dimethylsiloxane) coating active layer. The performances of the membranes for the application of recovery process in terms of their morphology, gas permeance test for $N_2$ and $O_2$ gases. Durability against benzene, toluene and xylene was also investigated. And permeation test for multi-component VOCS through the membrane with different feed concentration and stage-cut were investigated. Permeance of PEI supported membrane and the membranes coated with PDMS decreased from 45,000 GPU to 63 GPU and 49,450 to 30 GPU for $N_2$ and $O_2$, respectively. Recovery efficiency and concentration of VOCs in permeate increased with decreasing stage-cut. VOCs concentration in permeate proportionally increased with increasing feed concentration but concentration ratio and recovery efficiency showed any noticeable changes with feed concentration change.

• Membrane Journal
• /
• v.23 no.2
• /
• pp.119-128
• /
• 2013

In this research, PEI/PEBAX composite hollow fiber membrane was used for the removal of water vapor from gases. PEI (Polyetherimide) substrate membrane was spinned by dry-wet phase inversion method and coated with PEBAX (Polyether block amides) 3533 and PEBAX1657. Fabricated fibers typically had an asymmetric structure of a dense top layer supported by a sponge-like substructure through scanning electron microscopy (SEM). $H_2O/N_2$ mixture gas was used to compare the performance of separation according to temperature, pressure and water activity. The results of PEBAX3533 and PEBAX1657 composite membranes respectively showed $H_2O/N_2$ selectivity of 61.7~118.5 and 85.3~175.4 according to operating conditions. PEBAX3533 composite hollow fiber membranes module showed the water vapor removal of 90%.

• Membrane Journal
• /
• v.23 no.1
• /
• pp.80-91
• /
• 2013

Metal-templated condensation of cyclohexanedione dioxime and phenylboronic acid in the presence of Fe(II) sulfate heptahydrate proceeds cleanly in methanol to furnish the Fe(II) clathrochelate. An organic/inorganic hybrid membranes composed of Fe(II) clathrochelate and polyethersulfone was prepared by using phase inversion method. For membrane preparation, the Fe(II) clathrochelate was highly soluble (3~5 g/L) in DMF, NMP, and DMAc, which meets the requirements for the solubility of metal complexes in polar aprotic solvent used in membrane preparation. It was stable even in the presence of strong acids, such as trifluorosactic acid (pKa = 0.3). It was characterized by UV-vis spectroscopy, and their stability in solution phase studied in the presence of (i) strong acids or (ii) competing chelates. Organic/inorganic hybrid membranes were prepared with polyethersulfone, polyvinylpyrrolidone, p-toluenesulfonic acid, Fe(II) clathrochelate and DMF by using nonsolvent induced phase inversion method. The addition of Fe(II) clathrochelate leads increase of surface pore density, mean pore size and flux. We can obtain highly asymmetric membranes by addition of Fe(II) clathrochelate.

• Journal of Sericultural and Entomological Science
• /
• v.8
• /
• pp.27-34
• /
• 1968

상수의 엽면적은 상엽의 수획량 즉 수량과 높은 상관관계가 있고 그의 간이측정법은 매우 의의 깊은 일이므로 상전에서 생체대로 엽면적을 측정할 수 있도록 간이측정법을 고안하였다. 우리나리 상수의 주요품종인 개량서반, 일지뢰, 노상 그리고 수원 제4호의 4개품종을 재료로 절위별로, 지조별로 엽면적과 엽장, 최대엽폭과의 관계를 조사 실험하였으며 공시 엽수는 개량서반 741문, 일지뢰 853문, 노상 507문, 수원제4호 441문, 도합 2,542문이었다. 5개열엽으로 엽형이 비슷한 개량서반과 일지뢰의 2개품종의 엽면적은 (엽장$\times$최대엽폭)$\times$0,643, 단엽인 노상과 수원제4호의 2개품종의 엽면적은 (엽장$\times$최대엽폭)$\times$0,735에 의해서 구할 수 있음을 알았다. 즉 개량서반과 일지뢰는 엽장에 최대엽폭을 곱한 적에 계수 0.634를 곱함으로써 전처리엽에서 planimeter에 의한 엽면적과 높은 상관관계를 보였고 이때의 상관계수의 평균을 개량서반에 있어서는 r=0.931, 일지뢰에 있어서는 r=0.960이었다. 노상과 수원상4호는 엽장에 최대엽폭을 곱한 적에 계수 0.735를 곱함으로써 전처리엽에서 planimeter에 의한 엽면적과 또한 높은 상관관계를 보였고 이때의 상관계수의 평균을 개량서반에 있어서는 r=0.931, 일지뢰에 있어서는 r=0.960이었다. 노상과 수원상 4호는 엽장에 최대엽폭을 곱한 적에 계수 0.735를 곱함으로써 전처리엽에서 planimeter에 의한 엽면적과 또한 높은 상관관계를 보였고 이 때의 상관계수 r의 평균을 노상에 있어서는 r=0.999, 수원상 4호에 있어서는 r=0.996이었다. 이 방법에 의하면 시간과 노력을 크게 절감시킬 수 있을 뿐만 아니라 생체대로 쉽게 엽면적을 구할 수 있는 이점이 있다.

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.3
• /
• pp.175-187
• /
• 2013

In-situ Raman and X-ray diffraction experiments have been performed on mineral natrolite (Na-zeolite) to investigate the dehydration behavior under high temperature and high pressure-temperature conditions. XRD data show reversible dehydration up to $450^{\circ}C$ whereas Raman data show irreversible change when the material is heated up to $630^{\circ}C$. The existence of post-natrolite was newly identified to form from ${\beta}$-metanatrolite at $380^{\circ}C$ upon cooling. The formation of dehydrated metanatrolite under simultaneous high temperature-pressure (room temperature < T < $300^{\circ}C$, 0 GPa < P < 2.1 GPa) conditions was not observed.

• Korean Journal of Materials Research
• /
• v.10 no.6
• /
• pp.392-397
• /
• 2000

The effect of pressure on the phase transformation in Fe-30Ni-0.35C Alloy and pure metals was investigated by using PDSC(pressure differential scanning calorimeter). As the pressure increased from 1 atm to 60 atm, the $A_s$points of the ausformed martensite and the marformed martensite in Fe-30Ni-0.35C Alloy were lowered about $2~4^{\circ}C$ at reverse transformation. This is why the volume change came down at phase transition(from martensite to autenite). As the pressure increased from 1 atm to 60 atm, $A_f$ points were constant or slightly increased. This is due to the promotion of carbide precipitation with increasing pressure. The enthalpy change of the ausformed martensite in Fe-30Ni-0.35C Alloy was increased by 10~14J/g. The melting points of the pure metals, Se, Sn, Pb, Zn and Te were slightly increased with increasing pressure. The enthalpy changes of the pure metals at melting were little changed or slightly increased with increasing pressure.

• Applied Chemistry for Engineering
• /
• v.10 no.2
• /
• pp.319-323
• /
• 1999

Asymmetric polyetherimide membranes were prepared by phase inversion method. In the modification of the skin layers of polyetherimide membranes, the effects of NaOH concentration on the morphology and pervaporation separation of water-isopropanol mixtures were investigated. With increasing concentration of NaOH solution, polyamicacid structure was formed by the hydrolysis of imide group of polyetherimide, and the thickness of dense layer of the asymmetric membrane increased. In the pervaporation separation of water-isopropanol mixtures the overall permeation rate decreased and the separation factor increased with increasing concentration of NaOH solution. However, when the concentration of NaOH solution was very high, the permeation rate increased but separation factor decreased. From these results, it was found that the permeation behaviors of asymmetric polyetherimide membranes depended upon the concentration of NaOH solution. These modified membranes showed that both the permeation rate and separation factor increased as the operating temperature increased.

• Applied Chemistry for Engineering
• /
• v.18 no.6
• /
• pp.545-551
• /
• 2007

HCl concentration, reaction temperature, and $Ti^{4+}$ concentration are the decisive factors in determining the structure of precipitates in the process of synthesis of $TiO_2$ particles from aqueous $TiCl_4$ solution by precipitation and the volumetric proportion of brookite phase in $TiO_2$ particles can be controlled by these factors. Pure brookite-type $TiO_2$ nanoparticles were synthesized by heating the aqueous $TiCl_4$ solution with no more than 1.0 M of $Ti^{4+}$, in which the concentration of HCl was kept in the range of about 2.53~6.41 M during reaction, at the temperature below $70^{\circ}C$ for 20 h. Also, Pure brookite was finally transformed to a rutile phase via an anatase phase through heat-treatment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2958-2965
• /
• 2015

The PLGA(Poly lactide-co-glycolide) Copolymer have been actively applied to the medical implant material as biomaterials. PLGA membrane was able to alveoloplasty with osteotomy for favorable degradation characteristics and possibilities for sustained drug delivery. In this study, PLGA membrane was prepared using phase inversion method, and examined to optical method analysis(NMR, IR), mechanical property measurement (tearing strength) and thermal characteristic analysis(DSC). In addition, the biodegradation characteristics of the PLGA membrane filled with a PBS(Phosphate Buffered Solution) of the water bath ($60^{\circ}C$) according to the degree of surface degradation in the degradation time, the pH change of the solution and change of the mass of the membrane were measured.