• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.6
• /
• pp.2641-2647
• /
• 2012

Quality and sensory characteristics such as microbial count, pH, acidity, flavor, taste, color and overall acceptance of bamboo shoot pickle cured with red pepper paste and bamboo shoot pickle cured with soy sauce paste made of Maengjong bamboo shoots were investigated during a long-term storage at different temperature (at $25^{\circ}C$, $35^{\circ}C$ and $45^{\circ}C$). Microbial contamination was not observed, and water content did not showed significant change in all samples of both pickles during the whole storage period of 30 days, regardless of storage temperature. At $25^{\circ}C$, all sensory characteristics of bamboo shoot-red pepper paste pickle did not show a significant change for 30 d. However, at $35^{\circ}C$ and $45^{\circ}C$, the flavor, taste and color of bamboo shoot-red pepper paste pickle did not change remarkably, but the overall acceptance significantly changed from the beginning of storage. Bamboo shoot-soy sauce pickle did not give a significant change in flavor, taste and overall acceptance at $25^{\circ}C$, $35^{\circ}C$ and $45^{\circ}C$. However a remarkable change in color started to be shown at 25 d in case of storage at $45^{\circ}C$. Overall acceptance and color were selected as indicating parameters for the shelf-life estimation of bamboo shoot-red pepper paste pickle and bamboo shoot-soy sauce pickle, respectively. Based on room temperature storage and delivery at $20^{\circ}C$, the shelf-life of bamboo shoot-red pepper paste pickle and bamboo shoot-soy sauce pickle were determined as 308 d (about 10 month) and 447 d (about 14 month), respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.5
• /
• pp.1082-1090
• /
• 2009

Peak expiratory flow rate(PEF) is a very important diagnostic parameter obtained from the forced vital capacity(FVC) test. The expiratory flow rate increases during the short initial time period and may cause measurement error in PEF particularly due to non-ideal dynamic characteristic of the transducer. The present study evaluated the initial rise slope($S_r$) on the flow rate signal to compensate the transducer output data. The 26 standard signals recommended by the American Thoracic Society(ATS) were generated and flown through the velocity-type respiratory air flow transducer with simultaneously acquiring the transducer output signal. Most PEF and the corresponding output($N_{PEF}$) were well fitted into a quadratic equation with a high enough correlation coefficient of 0.9997. But only two(ATS#2 and 26) signals resulted significant deviation of $N_{PEF}$ with relative errors>10%. The relationship between the relative error in $N_{PEF}$ and $S_r$ was found to be linear, based on which $N_{PEF}$ data were compensated. As a result, the 99% confidence interval of PEF error was turned out to be approximately 2.5%, which was less than a quarter of the upper limit of 10% recommended by ATS. Therefore, the present compensation technique was proved to be very accurate, complying the international standards of ATS, which would be useful to calibrate respiratory air flow transducers.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1290-1302
• /
• 2019

This study is a descriptive research with a purpose of examining the effects of health perception, self-efficacy and social support of college students on the health promotion behaviors. The subjects of this study have targeted 196 college students, where the data collection was made from September 10, 2018 to October 5, 2018. As a result of analyzing the differences in health promoting behaviors according to general characteristics of college students, there was a statistically significant difference according to the residence type(F=8.56, p<.001), subjective health status(F=7.23, p=.001), university life satisfaction(F=8.50, p<.001), exercise status(t=6.62, p<.001), and number of breakfasts per week(F=14.13, p<.001). For the correlation between college students' health perception, self-efficacy, social support, and health promotion behaviors, health promotion behavior and health perception(r=44, p<.001), self-efficacy(r=.57, p<.001), and social support(r=.49, p<.001) has shown a significant positive correlation between them. As a result of conducting multiple regression analysis by setting general characteristics, health perception, self-efficacy and social support as independent variables in order to analyze the factors affecting health promotion behaviors of college students, The variables that have significant explanatory power on health promoting behaviors(F=34.921, p<.001) were self-efficacy, social support, number of breakfasts per week(more than 5times), whether or not to exercise, number of breakfasts per week(2 to 4times), rent and lodging for residential type, and for grade, seniors. The explanatory power of these factors on health promotion behaviors was a total of 56.9%. Conclusively, In order to Improving health promotion behavior requires the development and intervention of personalized health promotion programs for each generation that consider self-efficacy and social support and emphasize the importance of proper exercise and proper eating habits.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.2
• /
• pp.133-141
• /
• 2012

Effects of temperature and salinity on the growth of the toxic dinoflagellate $Alexandrium$ $tamarense$ and $A.$ $catenella$ isolated from the southern coast of Korea were examined in the laboratory. Growth experiment was conducted under the following combinations of temperature and salinity; 10, 15, 20, 25 and $30^{\circ}C$, 10, 15, 20, 25, 30 and 35 psu at a constant irradiance of 300 ${\mu}mol$ photons $m^{-2}s^{-1}$. Temperature and salinity conditions for maximum growth rate were indicated as follows: temperature $15^{\circ}C$ and salinity 30 psu (0.31 $d^{-1}$) in $A.$ $tamarense$, temperature $25^{\circ}C$ and salinity 30 psu (0.36 $d^{-1}$) in A. catenella. Temperature and salinity ranges for optimum growth condition of two species were $10{\sim}20^{\circ}C$, 25~35 psu and $120{\sim}30^{\circ}C$, 25~35 psu, respectively. The result of two-factor ANOVA indicated significant effects (P<0.001) of temperature and salinity on the growth rate, and two species were more effected by a temperature than a salinity on the growth. In addition, prediction equations were obtained through the multiple regressions of the specific growth rates as ${\mu}=0.04+0.0193T-0.0339S- 0.0005T^2+0.0021S^2+0.00073TS-0.000022T^3-0.000038S^3+0.00000086TS^2-0.0000255T^2S$ in $A.$ $tamarense$ and ${\mu}=1.01-0.1288T-0.0778S+0.0067T^2+0.0038S^2+0.00204TS-0.0001T^3-0.000059S^3-0.0000131TS^2-0.0000392T^2S$ in $A.$ $catenella$. Correlation coefficient between experimental values and simulated values was highly indicated. These results seem to provide information for understanding the spreading mechanism of $A.$ $tamarense$ and $A.$ $catenella$.

• Journal of Nutrition and Health
• /
• v.42 no.6
• /
• pp.523-535
• /
• 2009

The aim of this study was to examine and compare the eating habits and dietary intake patterns of people with or without allergy by the survey during August-September, 2008. The 131 subjects aged 10'-50' (AG = allergy group, n = 62; NG = non-allergy group, n = 69) participated in this study. The questionnaire included general characteristics, dietary habits, and food frequency. Income level tended to be higher in AG than in NG, and AG had more pets and flower pots than NG (p < 0.01). In AG, most affected area of allergy was the skin and the subjects in AG experienced the mixed symptoms and more than 2 types of allergy. Family history of allergy was highly related with allergy of the subjects (AG: 66.1%, NG: 33.9%). Both groups did not exercise regularly, but frequency of alcohol drinking in AG was significantly higher than in NG (p < 0.01). AG skipped meals and had snacking more often than NG (p < 0.05). Most favorite snacks in AG were instant foods, fast foods, cookies, and ice cream (p < 0.05). Therefore, AG tended to consume more allergy-related foods than NG. Highly-consumed allergy-related foods were egg, pork, walnut, onion, tuna, shellfish, and kiwi (p < 0.05). Therefore, nutrition education and guidance is needed to establish good eating habits, food intakes, and life style in people having allergy.

• Journal of Nutrition and Health
• /
• v.42 no.8
• /
• pp.702-713
• /
• 2009

This study was conducted to estimate the prevalence of constipation, bowel habits and nutrient intakes of college students. The subjects were 353 college students (166 males and 187 females) aged 19 to 29 years in Incheon area. The subjects were asked about bowel habits and dietary intake using questionnaires during march, 2008 and the prevalence of functional constipation (FC) was based on the Rome II criteria. The prevalence of FC in male and female students was 12.7% and 28.9%, respectively. The prevalence of self-reported constipation in male and female students was 12.0% and 36.9%, respectively. Both were higher in female students compared to male students. Among the subjects that have self-reported constipation, proportions of FC were 35.0% in male students and 55.1% in female students. Of subjects that did not self-reported constipation, the proportions of FC were 9.6% in male students and 13.6% in female students. Over 90% of respondents that self-reported constipation in male students, had neither visited a hospital and nor used laxatives or functional foods for constipation relief. Seventy five point three percent of male students, and 40.1% of female students, had a defecation frequency of over 5 times per week (p < 0.001). Ratios intaken under the estimated average requirement (EAR) of Vit A, Vit C, folic acid and Ca were over the 50% regardless of functional constipation. Mean daily consumption of total dietary fiber was 15.0 g/day in male students and 13.5 g/day in female students. According to these results, both functional constipation and self-reported constipation are more frequent in female college students and further studies are required in case-control study and related to psychological factors as well as nutrients to relieve of constipation.

• The Journal of Korean Society for Radiation Therapy
• /
• v.27 no.1
• /
• pp.53-60
• /
• 2015

Purpose : The purpose of this study is to evaluate the usefulness of a 3D printed phantom for in-vivo dosimetry of a prostate cancer patient. Materials and Methods : The phantom is produced to equally describe prostate and rectum based on a 3D volume contour of an actual prostate cancer patient who is treated in Asan Medical Center by using a 3D printer (3D EDISON+, Lokit, Korea). CT(Computed tomography) images of phantom are aquired by computed tomography (Lightspeed CT, GE, USA). By using treatment planning system (Eclipse version 10.0, Varian, USA), treatment planning is established after volume of a prostate cancer patient is compared with volume of the phantom. MOSFET(Metal OXIDE Silicon Field Effect Transistor) is estimated to identify precision and is located in 4 measuring points (bladder, prostate, rectal anterior wall and rectal posterior wall) to analyzed treatment planning and measured value. Results : Prostate volume and rectum volume of prostate cancer patient represent 30.61 cc and 51.19 cc respectively. In case of a phantom, prostate volume and rectum volume represent 31.12 cc and 53.52 cc respectively. A variation of volume between a prostate cancer patient and a phantom is less than 3%. Precision of MOSFET represents less than 3%. It indicates linearity and correlation coefficient indicates from 0.99 ~ 1.00 depending on dose variation. Each accuracy of bladder, prostate, rectal anterior wall and rectal posterior wall represent 1.4%, 2.6%, 3.7% and 1.5% respectively. In- vivo dosimetry represents entirely less than 5% considering precision of MOSFET. Conclusion : By using a 3D printer, possibility of phantom production based on prostate is verified precision within 3%. effectiveness of In-vivo dosimetry is confirmed from a phantom which is produced by a 3D printer. In-vivo dosimetry is evaluated entirely less than 5% considering precision of MOSFET. Therefore, This study is confirmed the usefulness of a 3D printed phantom for in-vivo dosimetry of a prostate cancer patient. It is necessary to additional phantom production by a 3D printer and In-vivo dosimetry for other organs of patient.

• Korean Chemical Engineering Research
• /
• v.58 no.4
• /
• pp.642-650
• /
• 2020

In general, the circulation path of the fluidized particles in a CFB (Circulating Fluidized Bed) boiler is such that the particles entrained from a combustor are collected by a cyclone and recirculated to the combustor via a sealpot which is one of non-mechanical valves. However, when a fluidized bed heat exchanger (FBHE) is installed to additionally absorb heat from the fluidized particles, some particles in the sealpot pass through the FBHE and then flow into the combustor. At this time, in the FBHE operated in the bubbling fluidization regime, if the heat flow is not evenly distributed by poor mixing of the hot particles (800~950 ℃) flowing in from the sealpot, the heat exchanger tubes would be locally heated and then damaged, and the agglomeration of particles could also occur by formation of hot spot. This may affect the stable operation of the circulating fluidized bed. In this study, the unevenness of heat flow arising from structural problems of the FBHE of the domestic D-CFB boiler was found through the operating data analysis and the CPFD (Computational Particle Fluid Dynamics) simulation using Barracuda VR. Actually, the temperature of the heat exchanger tubes in the FBHE showed the closest correlation with the change in particle temperature of the sealpot. It was also found that the non-uniformity of the heat flow was caused by channeling of hot particles flowing in from the sealpot. However, it was difficult to eliminate the non-uniformity even though the fluidizing velocity of the FBHE was increased enough to fluidize hot particles vigorously. When the premixing zone for hot particles flowing in from the sealpot is installed and when the structure is changed through the symmetrization of the FBHE discharge line for particles reflowing into the combustor, the particle mixing and the uniformity of heat flow were found to be increased considerably. Therefore, it could be suggested that the structural modification of the FBHE, related to premixing and symmetric flow of hot particles, is an alternative to reduce the non-uniformity of the heat flow and to minimize the poor particle mixing.

• Korean Journal of Remote Sensing
• /
• v.27 no.5
• /
• pp.613-623
• /
• 2011

This study assessed the feasibility to apply Two-band and Three-band reflectance models for chlorophyll-a estimation in turbid productive waters whose scale is smaller and narrower than ocean using a high spatial resolution image. Those band ratio models were successfully applied to analyzing chlorophyll-a concentrations of ocean or coastal water using Moderate Imaging Spectroradiometer(MODIS), Sea-viewing Wide Field-fo-view Sensor(SeaWiFS), Medium Resolution Imaging Spectrometer(MERIS), etc. Two-band and Three-band models based on band ratio such as Red and NIR band were generally used for the Chl-a in turbid waters. Two-band modes using Red and NIR bands of RapidEye image showed no significant results with $R^2$ 0.38. To enhance a band ratio between absorption and reflection peak, We used red-edge band(710 nm) of RapidEye image for Twoband and Three-band models. Red-RE Two-band and Red-RE-NIR Three-band reflectance model (with cubic equation) for the RapidEye image provided significance performances with $R^2$ 0.66 and 0.73, respectively. Their performance showed the 'Approximate Prediction' with RPD, 1.39 and 1.29 and RMSE, 24.8, 22.4, respectively. Another three-band model with quadratic equation showed similar performances to Red-RE two-band model. The findings in this study demonstrated that Two-band and Three-band reflectance models using a red-edge band can approximately estimate chlorophyll-a concentrations in a turbid river water using high-resolution satellite image. In the distribution map of estimated Chl-a concentrations, three-band model with cubic equation showed lower values than twoband model. In the further works, quantification and correction of spectral interferences caused by suspended sediments and colored dissolved organic matters will improve the accuracy of chlorophyll-a estimation in turbid waters.

• Korean Journal of Remote Sensing
• /
• v.30 no.2
• /
• pp.185-205
• /
• 2014

SAR ground moving target indicator (GMTI) has long been an important issue for SAR advanced applications. As spatial resolution of space-borne SAR system has been significantly improved recently, the GMTI becomes a very useful tool. Various GMTI techniques have been developed particularly using multi-channel SAR systems. It is, however, still problematic to detect ground moving targets within single channel SAR images while it is not practical to access high resolution multi-channel space-borne SAR systems. Once a ground moving target is detected, it is possible to retrieve twodimensional velocities of the target from single channel space-borne SAR with an accuracy of about 5 % if moving faster than 3 m/s. This paper presents a quick-and-dirty method for detecting ground moving targets from single channel SAR single-look complex (SLC) images by differentiation. Since the signal powers of derivatives present Doppler centroid and rate, it is very efficient and effective for detection of non-stationary targets. The derivatives correlate well with velocities retrieved by a precise method with a correlation coefficient $R^2$ of 0.62, which is well enough to detect the ground moving targets. While the approach is theoretically straightforward, it is necessary to remove the effects of residual Doppler rate before finalizing the ground moving target candidates. The confidence level of results largely depends on the efficiency and effectiveness of the residual Doppler rate removal method. Application results using TerraSAR-X and truck-mounted corner reflectors validated the efficiency of the method. While the derivatives of moving targets remain easily detectable, the signal energy of stationary corner reflectors was suppressed by about 18.5 dB. It results in an easy detection of ground targets moving faster than 8.8 km/h. The proposed method is applicable to any high resolution single channel SAR systems including KOMPSAT-5.