• Journal of KIBIM
• /
• v.12 no.4
• /
• pp.1-18
• /
• 2022

New Fabrication Facility (FAB) construction is performed with Building Information Modeling (BIM) based design. The BIM design data keep updated during the FAB construction. To improve fast-track construction management, a Fabrication Facility Augmented Reality (FABAR) was developed. This study introduces a FABAR system development process and shows performance evaluation results of the FABAR prototype system. The FABAR is implemented with three major modules: Augmented Reality (AR) visualization unit (Room-box) to transfer big BIM data to AR data, AR registration and tracking unit to match AR with real scape and to keep AR coordination in real, and AR data management unit to enhance usability. The prototype performance results were as follows: visualization of design BIM data via AR within 24 hours, precise AR registration and tracking registration, and appropriate usability to support FAB construction management at site. The results indicate that the FABAR is applicable for FAB construction management. Especially, the BIM data transformation method using Room-box in this study signifies a new construction management approach using fluctuating BIM design data in the fast track construction condition.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.4
• /
• pp.105-111
• /
• 2006

Earthquake strong motion recordings from two deeply embedded sites with instrumented structures and free-field accelerographs are used to evaluate variations between foundation-level and free-field ground motions. The foundation free-field ground motion variations are quantified in terms of frequency-dependent transmissibility function amplitude, ${\mid}H\mid$. Comparisons are then performed with an analytical model for the assumed conditions of a rigid base slab and a vertically propagating, coherent incident wave. The limiting assumptions of the model are not strictly satisfactory for actual structures, and the results of the analysis reflect not only incoherence effects, but also possible foundation flexibility and wave inclination effects. Nonetheless, the simple analytical model is in an acceptable agreement with the empirical analysis and appears to be applicable in practice.

• Korean Architects
• /
• s.615
• /
• pp.28-31
• /
• 2020

도입까지 시간이 걸릴 것이라고 예측됐던 건설정보모델링(BIM : Building Information Modeling, 이하 BIM)이 어느새 성큼 다양한 분야에 진입했다. 영국, 싱가포르, 미국 등 해외에서는 이미 공공사업 시 BIM을 적극적으로 활용하고 있다. 우리나라 또한 2018년 국토교통부에서 '스마트 건설기술 로드맵'을 마련한 후 공공사업에 BIM을 단계적으로 도입해왔다. 대부분의 발주기관들은 오는 2025년까지 공공사업에 BIM을 전면 도입한다는 계획이다. 성균관대학교 공과대학 건설환경공학부 및 미래도시융합공학과 교수이자 국제건설자동화학회의 종신 상임이사인 권순욱 교수는 '스마트 건설 관리' 연구자이자 국내외에서 활동 중인 CM, BIM의 권위자다. 관련 분야의 책 8권과 100편 이상의 논문을 집필하고 30여 개의 특허·소프트웨어 등록을 보유하고 있다. 텍사스 오스틴 대학교 토목공학 박사 출신으로, 삼성물산, 한국건설기술연구원 등 일반 기업과 국가기관에서 실무와 이론을 두루 경험하며 경력을 쌓았다. 건설연구개발사업, 첨단 융복합 건설기술 등 다수의 국가 건설 R&D에 참여해 초고층 자재, 안전 모니터링, BIM 프로세스 표준개발 등의 시스템을 개발하기도 했다. 해외 연구자들과의 교류에도 적극적이다. 세계 석학들과 '노령 공학' 관련 영문교과서를 공동 집필(스마트주택 챕터 담당)했고, 2016년과 2019년엔 국제건설자동화학회와 국제프로젝트관리학회의 연사 자격으로 강단에 섰다. "영국, 싱가포르 등에선 공공사업을 100% BIM으로 발주하기 시작했습니다. 우리나라 정부도 비슷한 길을 가고 있습니다. 일정 규모의 발주 물량이 안정적으로 나오는 공공기관에서 그렇게 한다는 것은 국가가 전체 패러다임을 바꾸겠다는 의지 아닐까요?" 6월 10일 그의 연구실에서 권순욱 교수를 만나 BIM의 현황과 전망에 대해 들어봤다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1A
• /
• pp.95-100
• /
• 2009

This study proposed mix proportions of early strength pavement concrete for large size area using calcium nitrate. Therefore, we used type III cement with calcium nitrate. Laboratory tests conducted to air content, slump loss test, setting time test, compressive strength test and flexural strength test. Our early strength pavement concrete mixture proportion proposed in this study for large size area attained the required compressive strength of 21 MPa and a flexural strength of 3.8 MPa, which allowed it to be opened to traffic within 8 hours. Based on test results, we suggested optimum mix proportions of early strength pavement concrete for large size area using calcium nitrate.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.145-146
• /
• 2022

The demand for a construction method capable of securing a safety environment and improving quality is increasing. There is a high risk of falling when working at a high place in an environment where it is difficult to secure visibility, such as an underground space, and there is a risk of falling if cement liquid waterproof materials are transferred to the top of the scaffold by manpower. In addition, when working on a high place in a poor environment, the quality uniformity of the upper part of the wall is deteriorated. In addition, as waterproof technicians gradually age and decrease, it is difficult to secure them, so it is urgent to prepare countermeasures against the shortage of waterproof technicians. Therefore, the purpose of this study is to develop cement liquid waterproof spouting construction equipment that can secure uniform quality of construction areas to prevent accidents and ensure safety of workers, improve work efficiency and quality due to improvement of work environment. The adhesion performance of the cement liquid waterproof material could be improved by about 20% in accordance with the use of the equipment.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.235-236
• /
• 2023

Concrete surfaces have weak surface strength due to bleeding and laitance, and problems such as peeling, cracking, and cracking may occur. In particular, underground parking lots can be said to be more vulnerable to peeling, breaking, and cracking if excessive loading of materials and equipment movement are not managed at the initial age after placing of concrete. Cracks, peeling, and cracking problems in slab concrete in underground parking lots of apartments can lead to leakage problems and affect finishing materials constructed on top of topping concrete, reducing the performance required for waterproof materials. Therefore, in this study, the bleeding and surface strength according to the standard of topping concrete and the use of admixture were reviewed to solve the crack, peeling, and cracking problems among the types of defects in underground parking lot slab concrete. As a result, it was derived that the optimal concrete compressive strength is 30MPa or more, and it is a reasonable performance design method to prohibit the substitution of admixtures.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.237-238
• /
• 2023

When primer is applied manually, adhesion performance decreases due to a decrease in primer penetration performance on the surface, and construction period delay may occur due to a long time due to a decrease in work efficiency when a large area is worked using a conventional roller. In addition, in the case of the roller method, precision work in corners and narrow spaces is not possible, so it is urgent to come up with measures to ensure uniform quality. In addition, secondary work occurs to remove fine powder from the surface before primer application, resulting in construction period delay due to the rise of the working stage. Therefore, in this study, equipment was used instead of manual work for primer work, and as a result, penetration performance and adhesion performance were improved about twice. From these results, it was confirmed that favorable results such as improving work speed, securing high quality, improving the working environment, and resolving the shortage of functional workers can be obtained.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.106-106
• /
• 2016

매립공사시 매립토의 유실로 인한 공사기간의 지연, 공사비 증액 등이 발생할 수 있다. 이에 대한 정량적인 예측은 매우 중요하나, 그에 대한 연구는 상대적으로 미비하다. 본 연구에서는 매립토의 유실은 유입된 유사와 호안 표면의 유사가 흐름에 의해 공사구간을 빠져나간 양이라 정하였다. 매립공사에서 유실량의 산정은 매립물량 산정과 직결되며 이는 경제성 부분에서 매우 중요하다. 그러나 국내에서는 경험에 의존한 유실율을 기준으로 매립물량을 결정하고 있는 실정이고, 현장계측으로도 유실량을 정량적으로 판단하기 쉽지않다. 따라서 본 연구에서는 호안 주변의 흐름 특성을 고려한 매립토의 유실량을 정량적으로 평가하기 위한 방안으로 실험적 연구를 수행하였다. 수리실험은 길이 13.0 m, 폭 5.0 m의 직사각형 단면의 광폭 수로에서 수행하였으며 일정한 양의 유사를 유입하기 위해 자체 제작한 유사공급장치를 사용하였다. 매립토의 특성을 고려하기 위하여 일반모래($d_{50}=0.621mm$, SG=2.72)와 안트라사이트($d_{50}=1.547mm$, SG=1.61) 두 가지 유사를 사용하였고, 매립토 유실요인 중 흐름특성에 의해 외부로 유실되는 양을 보다 명확히 규명하기 위해 유사를 유입하기 전과 후의 양을 각각 직접 채취하는 원시적인 방법과 3D 스캔을 통한 방법을 이용하여 평가한 유실율과 비교 검토해 보았다. 두 가지 방법에 대한 상대오차는 최대 3.12%로 나타났다. 흐름조건에 따른 매립토의 유실율은 살펴보면 두 가지 유사 모두 한계유속(Vc)을 넘어서는 순간, 급격히 유실율이 증가하였고, 일반모래는 약 10 % 안트라사이트는 약 30%로 각각 나타났다. 향후 매립토의 특성인자의 영향을 명확하게 구분하기 위해 다양한 매립토를 활용하여 보다 많은 조건하에서 실험을 수행한다면 매립토의 유실량 산정의 정확성을 높일 수 있을 것이라 기대된다.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.9
• /
• pp.63-69
• /
• 2011

The objective of this study is to investigate the change of physicochemical properties of humic acid, surfactants and water by pulsed electric field treatment. Critical micelle concentration(CMC) of surfactants and physicochemical properties of water were determined by the conductivity measurement, FT-IR and NMR, respectively. In electric field processing, structural changes of C-N complex and C=O were founded by FT-IR analysis. The increase of Hertz wave was in the range of 2.3 to 9.9 Hz in NMR analysis. CMC of cation and anion surfactant decreased to 1.3% and 9.2%, respectively, while the value of UV-vis increased. UV-vis of humic acid decreased by pulsed electric field. Therefore, application of pulsed electric field systeme was directly indicated to influence the physicochemical properties of water and organic compounds.

• Journal of the Korea Institute of Construction Safety
• /
• v.4 no.1
• /
• pp.9-15
• /
• 2021

Recently, buildings have become larger, more complex, and various construction methods have been tried. As a result, the use of construction equipment continues to increase, as well as safety accidents. According to the Ministry of Employment and Labor's report on industrial accidents, the rate of deaths caused by construction equipment among construction accidents has been increasing steadily since 2009. In the safety field of other industries such as crime and traffic, research has been continuously conducted to develop quantitative indicators due to demands for development of evaluation indicators or risk index development. On the other hand, construction equipment has been studied to analyze disaster cases and come up with improvement measures, but there is no research related to risk index. Therefore, the research will develop a quantitative index that can determine the risk level of construction equipment in the field based on the accident case and verify the possibility of use in the field.